Reviews Dual Ferrule Tube Fittings

uxcell Brass Tubing Nut Tube Fitting Compression Insert Hydraulic Nuts M8x6mm 2pcs

The ferrule joint has the characteristics of firm connection, high pressure resistance, good sealing and repeatability, convenient installation and maintenance, and safe and reliable work..
It is to insert steel/copper/aluminum tube/nylon tube into the ferrule, lock with ferrule nut, resist the ferrule, cut into the tube and seal..
It does not need to be welded when connecting with steel pipes, which is beneficial to fireproof, explosion-proof and high-altitude operations, and can remove the disadvantages caused by inadvertent welding..
It is a relatively advanced connecting piece in the pipeline of automatic control systems such as machine tools, oil circuits, oil pumps, oil refining, chemical, petroleum, food, instrumentation and so on..

CPI / A-LOK fittings have also been used extensively in other applications and industries wherever high reliability and quality are required..

Simple push in design for connecting to the tube and provide secure connection, requires no extra sealing..
- Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems..
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
This straight connector has barbed ends to create a tight seal on a hose when used with a hose clamp or crimp sleeve or ferrule (not included)..
Reducing union coupling for connecting two hoses with the differrent diameter in a straight run..

1-piece Retainer Ring that won’t fall off the fitting during installation..
Convenient, hand-tightening followed by ¼ to ½ turn with a wrench to seal the fitting..
Dual-size, inside-tapped fittings - ask any installer how handy this feature can be..
Annealed tube that allows the tubing to bend and stay bent..
Same dual-seal, gasket & O-ring fittings work with both traditional yellow and Flak Jacket products..

Auto Supplies Direct (70) Piece 3/16″ & 1/4″ Brake Line Fittings Kit (3/16″ and 1/4″ Tube Nuts, Unions, and Compression Fittings) for Cars and Trucks.
Contains a (30) Piece 3/16″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 3/16″ Short Tube Nuts, (10) 3/16″ Long Tube Nuts, and (10) 3/16″ Unions.
Contains a (30) Piece 1/4″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 1/4″ Short Tube Nuts, (10) 1/4″ Long Tube Nuts, and (10) 1/4″ Unions.
Contains (5) 3/16″ OD Compression Brake Line Fittings.
Contains (5) 1/4″ OD Compression Brake Line Fittings.

【Includes】The 8AN nylon and stainless steel braided CPE fuel line kit includes: 10pcs 8an CPE hose ends (4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends) and 1/2 CPE braided fuel line (Length:20ft/6M).
【Materials】The 8AN CPE fuel line Hose mostly used in cooler system and pump, fuel system, transmission system, Can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, coolant, fuel, and etc, but not applicable to E85..
【Lifetime】The 8AN CPE hose working temperature range: -40℉ to 257℉ (-40℃ to 125℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 500 psi. Bursting Pressure (psi): 2000psi..
【CPE Hose】The 8an CPE hose fitting is reused, just replaced a new olive/ferrule when reusing fittings with CPE hose. CPE tube is constructed with a seamless extruded CPE resin inner tube..
【Warranty】Three months limited warranty & Free lifetime technical support..

DEPENDABLE DRIP TUBE: Dependable 0.5-inch distribution tubing runs water from outside faucet.
Dimensions (L x W): 250 feet x 0.5 inches.
Connects with 0.5-inch barbed or compression fittings.
FLEXIBLE: Offers significantly greater flexibility, allowing tighter turns with fewer elbows for easier installation.
The pressure-compensating emitter design provides a consistent flow over the entire lateral length ensuring higher uniformity for increased reliability in the pressure range of 8.5 to 60 psi.
DUAL-LAYERED: Dual-layered tubing (brown over black) provides unmatched resistance to chemicals, algae growth and UV damage.
SPECIFICATIONS: Accepts Rain Bird Easy Fit Compression Fittings, XF Dripline Insert Fittings and 17mm insert fittings.
Use an Air/Vacuum Relief Valve Kit when installation is below soil.

【1/2 NPT MALE x Ф1/2 TUBE OD】Tube OD : 12mm(1/2").
【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage.
【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation.
【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing, convenient installation and maintenance, safe and reliable operation.
【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean.