Reviews Drywalsander With Dust Collection

Grizzly Industrial G0697X - 12\ 7-1/2 HP 3-Phase Extreme Series® Table Saw

  • 36-INCH T-GLIDE FENCE ASSEMBLY: The 36-inch T-Glide Fence & Rail are made of heavy-gauge steel for sure lockdown and reliably square cutting for years without deflection..
  • SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch..
  • UNMATCHED QUALITY: The trunnion and arbor are built for precision, strength and stability. The gas piston elevation delivers smooth and easy adjustability. Table flatness is measured diagonally at 0.010” maximum gap..
  • DUST COLLECTION: 99% dust collection is delivered above the table with the available dust collection blade guard (Model # TSG-DC, sold separately), and below the table with advanced shrouding around the blade. Available Overarm Dust Collection (Model # TSA-ODC, sold separately) routes dust away from the blade and into the 4” port..
  • RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe..
Check Stock

DCT 4in Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection

  • WOODSHOP DUST CONTROL: Use the DCT 4” Inch Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection to complete your woodshop dust control system by connecting 2 shorter pieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection.
  • Threaded quick connect adaptor end screws tightly into flexible hose and tapered end offers press-on attachment.
  • HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used.
  • Takes all of the work out of disconnecting and moving or switching from machine to machine.
  • Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability.
  • No special adapters for each tool required.
  • EASY TO USE: Designed to quick connect thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
  • 1/8-inch (3mm) quick adaptor coupling thickness.
Check Stock

SawStop 10-Inch Professional Cabinet Saw 3-HP 52-Inch Professional TGlide Fence System PCS31230-TGP252

  • 52-INCH T-GLIDE FENCE ASSEMBLY: The 52-inch T-Glide Fence & Rail are made of heavy-gauge steel for sure lockdown and reliably square cutting for years without deflection..
  • SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch..
  • UNMATCHED QUALITY: The trunnion and arbor are built for precision, strength and stability. The gas piston elevation delivers smooth and easy adjustability. Table flatness is measured diagonally at 0. 010” maximum gap..
  • DUST COLLECTION: 99% dust collection is delivered above the table with the included dust collection blade guard, and below the table with advanced shrouding around the blade. Available Overarm Dust Collection (Model # TSA-ODC, sold separately) routes dust away from the blade and into the 4” port..
  • RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe..
Check Stock

POWERTEC 70106 4-Inch Y-Fitting Dust Collection Hose Connector , Black

  • INCLUDES: 4” Dust Collection Hose Y-Fitting Connector.
  • FUNCTION: Connects 4” nominal ID dust hoses together to split to one or two machines, and then extend to other compatible machines. Please note: The nominal 4” OD Y-Fitting is designed to work directly with 4” ID Flexible Dust Control Hoses. To work with other 4” OD pipes or adapters, a union, such as POWETEC 70149 Flex Cuff, will be needed. Please see the listed photos and video..
  • FEATURES: Fits inside dust collection hoses and secures with band clamps, easy-to-use and versatile design that accommodates a variety of dust collection systems and woodworking power tools with 4” ID ports..
  • BUILD: Fittings is constructed out of rugged ABS plastic for abrasion resistance, toughness and long-term durability.
  • DIMENSIONS: All three 4-Inch nominal end measure 3-61/64 inch OD and 3-3/4 inch ID | Material Thickness: 1/8".
Check Stock

PSI Woodworking TSGUARD Table Saw Dust Collection Guard

  • Ideal solution for table saw safety and dust control.
  • Connected to your dust collection system, it captures the dust thrown up by your table saw blade.
  • Adjusts easily to suit thickness of material being cut.
  • Can be mounted to ceiling for maximum clearance.
  • Easily swings out of the way if not needed for certain cutting jobs.
  • Connects to any standard 4" dust collection hose or ductwork.
  • Replacement clear dust collection hood is available (TSGUARD-DH).
Check Stock

POWERTEC 70244 Heavy Duty 4-Inch x 20-Foot Flexible PVC Dust Collection Hose with 2 Key Hose Clamps Clear Color

  • INCLUDES: (1) 4 in. x 20 ft. left spiral transparent dust collector hose and (2) thumb screw 4 in. key hose clamps.
  • FUNCTION: A practical, safe and cost effective dust collection hose and clamp collection - designed to enhance your existing workshop dust collection and filtration systems.
  • FLEXIBLE PVC HOSE: Is reinforced with spring steel wire, puncture resistant, while delivering optimal maneuverability and toughness.
  • HOSE CLAMPS: Are made out of stainless steel for rust proof durability and feature a thumb screw design that allows you to quickly loosen or tighten the clamp around the flex hose (or item) without the use of tools.
  • VERSATILITY: Works with an assortment of major brand dust collection systems, indoor ventilation and dryer vent set-ups, along with many common piping, duct work and woodworking applications.
Check Stock

2-1/2 x 10' Ultra Flex Clear-Vue Heavy Duty PVC Hose - MADE IN USA!

  • When setting up our dust collection or filtration systems we tend to have a lot of “moving parts” during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won’t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!.
  • Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy ....
Check Stock

5' Hook and Loop Replacement Pad Compatible with Bosch ROS20VS, ROS20VSC, ROS20VSK, ROS20, ROS10

  • COMPATIBILITY WITH : Replacement Sanding Pad for Bosch RS035 & RS034.Compatible with Bosch Random Orbit Sander Model: ROS20VS, ROS20VSC, ROS20VSK, ROS20, ROS10..
  • EFFECTUVE DUST COLLECTION: Efficient 8-hole pad works with sanders that have dust collection system. 8 dust collection holes that vacuum up the dust and debris into Dust Bag Assembly..
  • SUPERIOR RUBBER PADS: High quality rubber pads engineered to provide smooth finishes..
  • PERFECT FIT: Great for general-purpose sanding and polishing. Ideal for flat surfaces and fast removal..
  • PACAGE INCLUDE :4*5-Inch Hook and Loop Sander Backing Pad.The product is not sponsored or endorsed by ,or affiliated with the brands it fit ,including Bosch.
Check Stock

BOSCH HDC300 SDS-Max and Spline Hammer Dust Collection Attachment

  • Chiseling dust collection shroud - focuses air suction from the vacuum around the chisel for maximum dust collection.
  • Unique ski-boot style clamping band - provides easy installation and adjustment onto the hammer tube.
  • Adjustable metal extension arm - provides easy adjustment for proper positioning around the chisel and can also accommodate different chisel lengths.
  • 3-piece adaptor set - allows the chiseling dust collection attachment to be installed on different size hammers.
  • 1-3/8-Inch dust port fits Bosch dust extractor vacuum nozzles.
Check Stock