Reviews Drywall Gypsum Board Jointing

USA Stock - Self Drilling Plastic Drywall Anchors and Screws Kit 100 Pieces Assortment kit sheetrock Wall Anchors #6#8 Anchors and Screws - No pre Drill Hole Required 50lbs-75lbs

  • PREMIUM QUALITY: High quality anchors and screws ensures long term use.
  • Drywall screws securely fasten your item to the wall.
  • NO DRILL NEEDED: List dry wall mount anchors does not require a pre-drilled hole.
  • Use basic tools to quickly drive the wall anchor in gypsum wall board.
  • STRONG ENGAGEMENT: Hollow wall anchor provides High-strength engagement to 3/8 inch , 1/2 inch , 5/8 inch gypsum wallboard.
  • Heavy duty drywall anchors can easily penetrate into thick or thin drywall and doors.
  • Package Dimensions: ?6.89 L x 3.5 W x 1.57 H inches.
Check Stock

Zinc Self-Drilling Drywall Anchors with Stainless Steel Screw Kit Heavy Duty Metal Wall Anchors and #8 x 1-1/4 Inches Screws 80 Pieces in Total

  • High strength, easier to start than other self-driving anchors. No need to prepare holes when used on drywall/hollow walls. It can hang up to 50 pounds..
  • They are easy to take out and convenient to store when in use..
  • High-quality and environmentally friendly zinc materials: Zinc materials are more durable than nylon or plastic materials. The gypsum board adopts the principle of thread anchoring to achieve firm bonding on the gypsum wallboard and bear a larger load..
  • Scope of application: only suitable for manual or electric tools to screw into gypsum board/gypsum board at low speed. It can also be used for lightweight concrete, hollow bricks, porous bricks, lime sand bricks and other soft substrates. If the substrate is thick or hard, please drill a 6mm hole in it in advance..
  • Note: When screwing the screw to the end of the tube, the screw will penetrate the tube and push to open the tip of the tail. This is normal so that it can be more closely embedded in the plasterboard..
Check Stock

meite #6 Fine Thread Drywall Screw by 1-5/8-Inch Length with Bugle Head, 5 Pounds Black #DSF158M (1 Box)

  • Black fine thread, sharp point, 5 pounds per box.
  • meite Fine Thread Drywall Screws designed for drywall (gypsum board, sheetrock, plasterboard).
  • Sharp Point drywall screws used for fastening interior drywall to wood.
Check Stock

Drywall Banjo Board Taping Tool, Gypsum Board Joint Tools with Inside Corner Roller Wheel, Right/Left Hand Operation, Sheetrock Tools for Dry Wall Repair, Finishing, Painting(Gray)

  • 【Special Design】- There are adjustable hand straps on the left and right sides of the banjo, With ergonomic practical principles, you can handle from all directions.Gypsum board joint tool with padded handles,the four-position switch helps to control the amount of putty glue..
  • 【Widely Application】- Drywall tools can be used for smaller jobs, suitable for all types of partitions and walls - decorate, add, and renovate narrow spaces such as closets, corners, walls and ceilings..
  • 【High Efficiency】- Plastic drywall banjo taper internal corner applicator wheel reverses easily with flat applicator wheel.Single latch with hinged lid opens easily and quickly for loading tape and mud..
  • 【 Important Tip】- You can cooperate with the video of the keyword Drywall Banjo on YouTube to quickly master this drywall tool. If you have any questions after purchase, you can contact us by email, we will provide you with solution unconditionally until you are satisfied..
Check Stock

meite #6 Coarse Thread Drywall Screws by 1-1/4-Inch Leg Length with Bugle Head, 5 Pounds Black #DSC114M (1 Box)

  • #2 phillips drive, 1-1/4-inch Leg Length.
  • meite Coarse Thread Drywall Screws designed for drywall (gypsum board, sheetrock, plasterboard).
  • Sharp Point drywall screws used for fastening interior drywall to wood.
Check Stock

Slot Cutter 2021 Square Rectangle Milling Cutter Carving One Step in Place Stainless Steel Square Slot Cutter Stainless Quickly for Plastic Metal or Low-Voltage Electrical Boxes mounting Compatible

  • ... clean. The fine and clean cut makes the socket installation easier!.
  • Strong and Durable: High quality stainless steel construction and laser cutting technology for durability and long life, High-quality stainless steel structure and laser cutting technology, durable and long service life. Suitable for gypsum board, drywall, etc.The square groove is suitable for cutting wood, gypsum board, and blue brick. The thickness of a single cut is about 7-8MM, and the repeated cutting can reach 30-35MM..
  • Precise cutting: Precisely create a single gang size of 2-3/8” x 3-3/4” or double gang size of 3-3/4” x 4” in the drywall, perfect for plastic, metal or low-voltage electrical boxes mounting..
  • WIDE COMPATIBILITY: Compatible with most industry standard oscillating multi-tools in the market, such as Dewalt, Dremel, Makita, Porter Cable, Ridgid, Rockwell, Fein Multimaster, Ryobi, Milwaukee, Chicago, Genesis, Craftsman etc. Suitable for plasterboard, dry wall etc..
  • Various uses: Make single gang or double gang rectangular holes in drywall for wall boxes such as high and low voltage tech, electrician, telephone, alarm/ security, CCTV/ IP camera, antenna, automation, home-theater including CEDIA members, HAVC, drywall contractor/ installer, etc..
Check Stock

400PCS #6 Flat Head Drywall Screws Assortment Quality Carbon Steel Sharp Point Self Tapping Screws Set for Sheetrock Wood Furniture Cabinet | by IMSCREWS

  • ⭐PACKAGE INCLUDES: #6 drywall screws 400pcs packed in 8 different length and quantities. #6 x 3/4''(20mm)—80pcs, #6 x 1''(25mm) —70pcs, #6 x 1-1/4''(30mm)—60pcs, #6 x 1-3/8"(35mm)—50pcs, #6 x 1-5/8''(40mm)—50pcs, #6 x 2''(50mm) —30pcs, #6 x 2-3/8"(60mm) —30pcs, #6 x 2-3/4"(70mm)—30pcs..
  • ⭐DURABLE & STURDY: Made of a high quality carbon steel and Black Oxide Finish. Improve the Ability of Corrosion Resistance and Anti Resistance. They are high strength and will not deform or break under normal use. The aggressive screw twist pattern allows you to drive them fast and to complete your project efficiently and quickly..
  • ⭐SPECIAL FEATURE: Black coarse thread, sharp point, Bugle head Phillips drive, durable strong metal steel screws, coarse drywall screws feature coarse threads to secure gypsum board to studs..
  • ⭐WILDELY APPLICATION: Drywall sheetrock screws are used to attach wood to wood and when installing gypsum board to wood studs. They have a sharp point to pierce through drywall, and a coarse thread design to help grab into wood studs. With sharp points for self-tapping into wood, furniture and mild steel. Typical uses are for installing dry wall /sheetrock, repairing wood furniture and cabinets. These screws can be used on a w....
Check Stock

Drywall Anchors Self Drilling Hollow Wall Anchors with Screws No Pre Drill Hole Preparation Required Nylon Plastic 10x35mm 13x42mm 15x32mm 260 Pieces

  • 【HIGH QUALITY】Drywall anchors self drilling hollow wall anchors made from nylon plastic, screws made from zinc steel, can be used outdoors or in wet environments..
  • 【DETAILED SIZE】10x35mm plastic anchors 10pcs, 13x42mm plastic anchors 60pcs, 15*32mm plastic anchors 60pcs, 8x35mm pan screws 130pcs..
  • 【WIDE APPLICATION】Nylon plastic anchors not only use for gypsum wall board, it also use for lightweight concrete, hollow bricks or other softer materials..
  • 【PRODUCT ADVANTAGE】Anchor bolt itself has its own tail tip, which does not require special installation tools or pre-drilling holes on the gypsum board. It can be directly screwed into the gypsum board. The entire installation process is convenient and fast..
  • 【CUSTOMER SERVICE】You are unsatisfied for any reason, return your goods with no questions asked and BUSY-CORNER STORE will provide a full refund..
Check Stock

Hilitchi 24-Pcs 1/4\ 3/16\ 1/8\ Molly and Toggle Bolt Assortment Kit Zinc Plated Steel Philips Round Head Toggle Wing Nut Bolt Set

  • Size--1/8x2-inch,includes:50 packs 1/8x2-inch toggle bolt and 50packs wing nut..
  • Drywall toggle bolt made of high quality zinc plated carbon steel are rust and corrosion resistant, durable enough to hang items.Maximum weight capacity is 22 pounds.
  • The collapsible spring-style wing design allows you to fold the wing so it can be placed in the borehole. The wing will open behind the gypsum board to provide reliable fixation..
  • Our 1/8 in toggle bolts can be used for hollow bricks, gypsum board, cement fiberboard, wooden boards and other hollow substrates, suitable for installing lamps, curtain rods, photo frames, coat racks, power switches, and more..
  • Easy to install--You need to drill a hole (large enough to pass through the collapsed spring wing), and then poke these drywall toggle bolts through the hole. At this time, the wing will be loosened and clamped inside, and then the bolts will be tightened back. Please note that you should leave enough space to release the wing. Finally, it is best to use an electric screwdriver to screw in the bolts..
Check Stock