Reviews Driver Window Motor

DS18 PRO-DRNEO 2\ Throat Bolt On Neodymium Compression Driver 3\ Titanium Voice Coil 800 Watts 115dB 8-Ohm (Single)

DS18 designs its Compression Drivers with aluminum horns to make sure they are above and beyond the standard high frequency driver/tweeter/horns in the market. These bad boys give so much clarity to their frequencies that any audio enthusiast would believe their whole sound system is ready to deploy for a major concert..
PEAK POWER HANDLING - At 800W Max and 600W RMS the PRO-DRNEO neodymium compression (horn) driver boasts out-of-this-world power handling for a Pro audio sound you will love..
TOP QUALITY NEODYMIUM MAGNETS - Neodymium magnets provide a higher magnetic flux density in the air gap, which generates a much greater action force in the voice coil. DS18 manufacturs nothing but the best..
NEODYMIUM MOTOR STRUCTURE - Provides the most motor force of any other driver motor on the market. Intense high frequency loudness without sacrificing sound quality..
USE WITH A WIDE VARIETY OF HORN STYLES - This compression driver features standard 3" (101.6mm) TPI threading, which allows it to work as a replacement driver for many popular horns..

OE Replacement Window Regulator and Motor Assembly, Easy Fit.
Compatible with Jeep Liberty 2002-2006(for the vehicle built before 02/25/2006 only) Sport Utility---Attention: it is Ball Stud Style not Hole Style.
Compatible with Jeep Liberty 65th Anniversary Edition 2006(for the vehicle built before 02/25/2006 only) Sport Utility---Attention: it is Ball Stud....
Reference Number: 748-569, 55360035AJ, 68059647AB.

Stepper motor with a standard interface..
A, B, C, D four-phase LED indicates the status of the stepper motor work..
Drive Module Board Size(in): 1.37*1.18*0.6.
5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board，With convenient use, direct docking.
Package Content: 5 set 28BYJ-48 Stepper Motor + Uln2003 Driver Board +20pcs female to male Dupont cable (as a gift).

Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge.
The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life.
The electronically-controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application.
Variable 2-speed 1/2" hammer Driver-Drill (0-550 & 0-2,100 RPM) with BL motor delivers 1,090 in.Lbs. Of max torque.
Variable speed impact driver (0-3,400 RPM & 0-3,600 IPM) with BL motor delivers 1,500 in.Lbs. Of max torque.

4 POLE MOTOR & 1,770 IN-LBS TORQUE - Our compact 4 pole motor provides higher efficiency, has double work output than a regular brushed 2 pole motor,....
VARIABLE SPEED & REVERSE CONTROL - The speed of the impact driver can be adjusted from 0 to 2900 RPM by the amount of trigger force. The variable....
¼” QUICK RELEASE CHUCK, BUILT-IN LIGHT, BELT CLIP - Compact (6”) and lightweight (2.68 lbs - bare tool) design fits into tight areas and....
LITHIUM ION TECHNOLOGY & 20V MAX - Power up for a longer runtime, no memory and more compact and lighter, much convenient than the corded. Battery....
ULTIMATE ACCESSORIES SET - Impact Driver, 1" Impact Driver Bits (20Pcs), 2" Impact Driver Bits (6Pcs), 2" Regular Driver Bits (2Pcs), Sockets....

Hybrid 4-function tool with impact, hammer, driver and drill all in one.
Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge.
The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life.
The electronically-controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application.
Hammer Driver-Drill mode features variable 2-speed operation (0-700 & 0-2, 700 RPM) (0-8, 400 & 0-32, 400 BPM).

Power You Can Rely On: The high energy motor is also response for output up to 110 dB with only one watt of input power.
New Technology: A neodymium motor focuses magnet flux into the gap while keeping driver weight below 3.92 pounds.
Designed for Efficiency: Compression horn driver uses a neodymium ring motor design to pack as much BL product into the voice coil gap as possible.
Solid Structure: When combined with the titanium dome diaphragm, to produce crisp sound over a broad range (from 1,200 to 18,000 Hz) with an emphasis on the critical mid range high range.
Quality You Can Trust: Choose Timpano’s D3200TI-ND titanium compression driver for a high output compression driver to be used for the critical mid range high (vocals).

Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge.
The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life.
The electronically-controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application.
Variable 2-speed 1/2" Hammer Driver-Drill (0-500 & 0-2, 000 RPM) with BL Brushless motor delivers 530 in pounds. Of max torque.
Variable speed impact driver (0-3, 400 RPM & 0-3, 600 IPM) with BL Brushless motor delivers 1, 500 pounds of max torque.

【Directly Fit】OE Replacement Power Window Regulator with Motor, Directly Fit.
【Vehicle Fitment】Compatible with Nissan Frontier 1998-2004 Pickup, Xterra 2000-2004 Sport Utility.
【Position】Front Left (Front Driver Side).
【Reference Number】80721-3S500, 741-681, 125-58697L, NI1350121.
【Buy with Confidence】1 Year Unlimited-mileage Quality Guarantee---We extremely value your satisfaction and strive to provide you good shopping experience. Any further question, please feel free to contact us at any time..