Reviews Double side Pcb

LANTRO JS 5pcs EMC EMI Near Field Probe Set, Near Field Magnetic Field Probe, Anti Interference RF Explorer SMA Conductive Radiation Test Antenna Kit, SMA Male Thread

Product Material----PCB adopts 1.6mm thick double‑sided board, 1.5 oz copper thickness, and the whole process of spraying tin to make sure good passing performance of large and small currents..
Fully Shielded Magnetic Field Probe----Greatly suppresses electromagnetic clutter interference in the external environment, improves the dynamic range of the entire system, and helps to improve the accuracy of position detection..
Function----Phase noise and spectrum components can be combined with a low‑noise preamplifier for measurement. It can help you find and identify potential sources of interference within the components of electronic components..
5PCS Probes---- There are 5pcs probes, can meet your use and replacement needs, convenient and practical. Small size, with case, easy to carry and store..
Note----When using, the PCB board should not be touched by hands ,Vertical use at frequencies exceeding 2 GHz..

These PCB boards are great for assembly of a point to point style electronics board. Suitable for countless small electronics projects such as building a robot. If you are working with hobby electronics and want a more permanent circuit solution but don't want to design your own PCB, these are great for you!.
The prototyping boards we provide here are in the size of: Dimension: 80mm x 120mm / 3.15 x 4.72 inch (W*L).
They are made of FR-4 glass fiber, double sided with tinned through holes. This is a fast easy way to build small projects, the boards are durable and the tinned holes can take heat without lifting off..
Easy to cut with a rotary tool. The pre-drilled holes in each corner are great for building with two layers..
Please read the measurements before ordering if you are concerned about the size..

These PCB boards are great for assembly of a point to point style electronics board. Suitable for countless small electronics projects such as building a robot. If you are working with hobby electronics and want a more permanent circuit solution but don't want to design your own PCB, these are great for you!.
The prototyping boards we provide here are in the size of: Dimension: 20mm x 80mm / 0.79 x 3.15 inch (W*L).
They are made of FR-4 glass fiber, double sided with tinned through holes. This is a fast easy way to build small projects, the boards are durable and the tinned holes can take heat without lifting off..
Easy to cut with a rotary tool. The pre-drilled holes in each corner are great for building with two layers..
Please read the measurements before ordering if you are concerned about the size..

The product have large heat dissipation area, possess stable operation and long running time.
The interior is composed of double balanced microwave diodes, come with high reliability.
Using 1.6mm thick PCB double sided board, sturdy and durable, come with long service life.
The conversion loss is only 8.0dB, and the noise figure is as low as 8.0dB (SSB). This is a passive device and does not require power supply.
35dB high isolation between local oscillator and RF input, which is stable and reliable.

1-Ohm stable monoblock operation for Max power Bridge 2 monoblocks together for double power! Military grade PCB w/ PWM MOSFET power supply Direct....
Military-Grade PCB with Pulse Width Modulated MOSFET power supply.
LED power (green) and protect (red) indicators.

PN5.640D - Soundstream 5-Channel 640W RMS Picasso Nano Series Class D Amplifier.
RMS Power Rating: 4 ohms: 60 watts x 4 chan. + 200 watts | 2 ohms: 80 watts x 4 chan. + 350 watts | 4 ohms Bridged: 160 watts x 2 chan. + 350 watts.

Package Included:Plastic Case + Feet + Stabilizers + GK64x Hotswap Type C PCB + Plate + Cable + Removal Tool + Space Module.
Pls note:GK64x is wired kit.The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place.If some keys not working after plugging,please check whether your switch pin is bent or not.Make sure plug in 90 degree above plate.
This kit support 6.25u space and split double space.This plate is screwed to case directly.So if you want to replace normal GH60 case,you need to replace a non -replacable GH60 size plate is ok..
PCB has RGB presoldered,it's under per switch.This kit need to use Cherry MX switches and clones,optical switches is not supported.
There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again.3 pin 5 pin both are ok.

...nt atmospheres for typing and gaming..
Erognomic and Solid Built： Ergonomic curves of keys layout provides smooth & comfortable typing and fast gaming. It Adopts ABS as the structure material. Due to the quality control process, it's duarable and stable. It uses Double-shot injection moulded keycaps, so the characters will never be scrached off or worn out,and let the led light out..
DIY Replaceable Switches:The base PCB supports solder free DIY replacement of switches. Just use a puller tool to pull the switches from the sockets on PCB then mount new switches on the sockets. The replacing and changing of switches becomes simple. (Puller Tool Included)..
Compatibility： Works with Windows and iOS Mac. 12 Month Warranty.

★32 pieces double sided PCB prototype boards well packed in a plastic tray which is very easy to store and take out.
★5 different size boards to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects.
★4 mounting holes at the corners of the board are very convenient for installing them together..
★Pre-tinned plated holes on the board make it very handy to solder components and sensors for your projects.
★High quality of durable glass fiber –FR4 material with 1.6mm thickness makes a very solid and sturdy prototype circuit board.