Reviews Distinctive Led Tail Light

Partsam 2Pcs 8.5' Oval Led Tail Lights 40LED Red for Trailer RV Motorhome Airstream Oval Led Stop Turn Tail Lights Surface Mount Taillights Replacement Lights IP68 Submersible w/Mounting Gaskets

  • Package includes 2 Pieces 8.5 Inch Oval Led trailer tail lights in Red Lens, 2pcs self tapping screws are included for complete mounting. It is a really nice Low profile trailer light for the back of your trailer, RV, Camper, Airstream or motor home. This led taillight is universal design 12V DC and is not vehicle specific. In fact, it can make a really nice upgrade for any kind of vehicle that you're putting these on.
  • These oval led trailer RV stop turn tail lights need to be hooked up to a 12v dc power source and includes 40 LEDs each. LEDs are brighter and light faster, draw less current and generate less heat than incandescents and the built-in reflex lens provides increased light output for added safety. With a sonically sealed submersible IP68 waterproof rating, our rv led tail lights are better suited to deal with any different kinds of serious weather attack.
  • Installation: These surface mount 8.5" oval led lights are HARDWIRED with 3 wires: White is Ground, Red is oval stop brake light or oval turn signal light and Black is oval tail/running light.
  • They're surface mount with 2 holes to secure and you'd need a hole for the wires to go through as there's no room under the red tail lights. Also a mounting gasket goes in between the light and the....
Check Stock

VLAND LED Tail lights Compatible with Ford Mustang 2015-2020 with Sequential Amber+Red Turn Signal (5 Lighting Modes), Clear Lens, Passenger&Driver Sides

  • ... OLED Rear Light Cluster with 3D Effect - OLED technology makes it possible to create a new, more three-dimensional and at the same time very sharply defined appearance on a Bimmer. VLAND Dragon Scales Concept Iconic Lights displays its own version of this design, which is reinforced with a distinctive “glowing” effect. The imitation M4 L-style OLED rear lights are a nice upgrade over factory style tail lamps..
  • Turn Signal with Sequential - No need extra bulbs. The lights have a row of amber LED run as switchback when you apply the turn signal..
Check Stock

Partsam 12V Waterproof Square LED Trailer Tail Light Kit Clear Lens Red Trailer Brake Stop Tail Turn Signal Running Lights License Kit for Camper Truck RV Boat Trailer Snowmobile Marine Under 80'

  • 4.56″ long x 3.78″ tall x 2.63″ deep.
  • trailer light kit with 2 stud mount waterproof LED tail lights, corrosion-resistant license-plate bracket, 25ft wiring harness(one 21.98 feet and one 3.93 feet wiring harness), stainless steel mounting hardware, 2pcs amber clearance lights and 4pcs reflective sticke. 2-stud mount on 2″ centers.
  • 2 Clear/Red, waterproof, stud-mounted LED trailer tail lights for less than 80″ trailers tractors truck boat snowmobile, esp. ideal for jet ski trailer lights. Square trailer light serves 7 functions: Stop light, Turn signal light, Tail light. Rear reflex reflector, Side marker light, Side reflex reflector, License plate illuminator(only for LH Side/Driver Side).
  • For this Red submersible LED trailer light kit, Right light has 16 LEDs (12 face, 4 side).
  • Left/streetside light has 21 LEDs (12 face, 4 side, 5 bottom). These trailer tail lights has no screws on the lamp shade, the LED trailer lights are completely welded together, The circuit board of tail light is seal. excellent tightness makes it be definitely IP67 waterproof and submersible. Of course, you can also put the clear epoxy around it for a guarantee.
  • White+ Yellow, front side works and is high brightness.
Check Stock

RV Tail Lights,HOYUZA RV Camper Lights Red Brake Turn Light White License Plate Light with Reflex Surface Mount Black Base Red Cover

  • 【Multi-function】: The RV tail lights with tail light, turn signal light and brake light 3 functions, and when the tail light is on, the license plate light will also be on. Using advanced LED combination lights, The lens has good light transmittance, brighter and energy-saving..
  • 【Applicable models】: This RV trailer light is suitable for most 12V vehicles including Camper, Trailers, semi-trailer, Tractors, Dump trucks, Caravans, UTVs, Pickup, flatbed, UTEs, Boat, special vehicles etc..
  • 【Good material】:The shell of the RV LED light is made of plastic, the lens and the rear shell are tightly connected with waterproof silicone, which can effectively waterproof, dust-proof, and anti-corrosion, which greatly extends the service life, and can work safely even in bad weather..
  • 【Easy installation】: There are three different color wires on the back of this RV light. The white wire is ground, the red wire is brake light, and the black wire is running light, which is convenient to connect. This RV LED light has mounting holes, which can be installed close to the surface of the trailer, which greatly saves your precious time..
  • 【Package Contents】: 1 x Left side tail light + 1 x Right side tail light + a pack of screws. One year warranty, please res....
Check Stock

Partsam 2Pcs LED Truck Trailer Tail Lights Bar Kit 40 LED Waterproof Tail Turn Signal Brake Light Running Reverse Light with Iron Net Protection 5 Wires 10V-30V for Truck Boat Trailer UTV RV Camper

  • Package includes 2pcs 40 LED Trailer Tail Light Bar. It is ideal for most towing vehicles equipped with 10V to 30V DC power supply, such as RV, campers, trailers, trucks, UTEs, UTVs, engineering vehicles, loader, boats, flatbed, vans, caravans, Excavator,Reaping machine and so on,can improve safety give your car a new look.
  • Trailer tail light bar adopts 40 pcs advanced LED with high brightness, long lasting, bright LED technology. Over 100% brighter than Stock units. Life span of over 50,000 hours. Our replacement trailer tail lights may very well outlast your truck! We do build a 2" X 4" reflector into the red portion of the lens, which will make them legal to use.
  • There is Iron bracket on the backseat and the iron net in front of the lampshade, which is stronger than others such as just pure plastic and protect the whole LED light bar effectively and prolong its service life.
  • 5-WIRE connection system for Negative, Turn Signal, Brake Light, Running Light and Reverse Light: Black Wire - Negative.
  • There are two mounting studs on the back with nuts to lock them in place. just cut your current tail lights wire harness one by one and matc....
Check Stock

Caltric compatible with Taillight Assembly w/Bulb Yamaha Rhino 660 YXR660F 4X4 2004 2005 2006 2007

  • 【 3 In 1 Design 】 : Integrated with running light and brake light, this 12V LED motorcycle brake tail lights always bright on running, high bright on stop brake. High efficient warning function, low consumption and energy saving.
  • 【 Premium Quality 】 : Adopt high quality ABS plastic material and advanced ultrasonic welding technology, this 12V motorcycle LED brake tail light is shockproof and waterproof, can use in any weather conditions. Not easy to aging and abrasion resistant.
  • 【 Easy Installation 】 : Easy installation, this 12V motorcycle LED tail light just directly replace the old or worn one, no need change the lines. Rational compact construction, lightweight and durable, can withstand destructive tests from 2 meters high.
  • 【 What You Will Get 】 : We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care! If you have any issue about the item, please contact us by e-mail, we will try our best within 24 hours to reply.
Check Stock

MZS Tail Light LED Integrated Turn Signal Blinker Smoke Compatible with CBR1000RR CBR 1000RR FIREBLADE 2008-2016

  • NOTICE - This is an aftermarket parts, not an OEM part, it will fit the models listed. Before purchase, please make sure it will fit your model and....
  • HIGH QUALITY COMPONENTS - MZS tail light use high quality ABS injection molded housing and UV protected lens element..
  • ADVANTAGE - The integrated LED Tail Light with Turn Signals have waterproof, dustproof, durable and high toughness..
  • ALL IN ONE - This tail light can be used as running light, brake light, turn signal light(turn left/right), Dual mode red/yellow LEDs, is used to....
  • INSTALLATION - Original tail lights have 7 wires inside and LED only have 5 wires, if connected the wrong one to make the light not light. So before....
Check Stock

Partsam 2x Double Led Trailer Tail Lights Horizontal Mount Dual Stop Turn Tail Backup Reverse Lights 33 LED Surface Mount RV Double Led Taillight RV Double Led Tail Lights 12V IP67 White Base w Gasket

  • Package Includes 2x led double horizontal mount taillights FULL LEDs featuring a white base with 6 screw holes for secure mounting, stainless steel screws are included. Also, mounting gaskets are included to create a tight seal and offer some cushion behind the actual light..
  • These Double Vertical Taillights include 2 red lenses: 1 replaceable red led stop, tail, and turn light, 1 clear backup light with a red reflex lens border, and White LEDs (a Built-in reflex reflector removes the need for a separate reflector).
  • This Led double tail light assemblies can be mounted oriented horizontally or vertically, whatever suits your application..
  • 5-Wire Connection: White is Ground (Negative), Blue is Backup/Reverse Light, Red is High Brightness for Stop or Turn Signals, and Black is Low Brightness for Tail or Running Lights.
  • NOTE: If upgrading from halogen bulbs to led, you may need resistors to splice in or you may have hyper flash on your turn signal..
  • Overall Dimensions: overall length is 9.5 inches approx., overall width is about 7 inches, and the tail light is about 0.87 inches thick, requiring 9 inches long x 6.3 inches hole-to-hole cutout for complete installation. Really a nice slim profile unit..
  • Warranty: We truly offer a 1-year warranty for these ....
Check Stock

Partsam 2x LED Triple Tail Lights 45 LEDs Rectangle Vertical Horizontal Mount LED Trailer Truck Camper RV Stop Turn Tail Lights Backup Reverse Taillights w Gasket Black Base Amber/Red/Clear Lens 12V

  • Package Includes 2x led triple horizontal mount taillights FULL LEDs featuring a black base with 8 screw holes for secure mounting, stainless steel screws are included. Also, mounting gaskets are included to create a tight seal and offer some cushion behind the actual light..
  • These Triple Vertical Taillights include 3 lenses: 2Pcs replaceable red led stop or tail lights, and 1 of them with 1Pc clear backup light with red reflex lens border and white LEDs (built-in reflex reflector removes the need for a separate reflector) in the center, 1Pc amber/yellow turn light.
  • This Led triple tail light assemblies can be mounted oriented horizontally, vertically, surface/flat-mount..
  • 8-Wire Connection: White Wire is Ground(Negative), Blue Wire is Backup/Reverse light, Red Wire is high brightness for Stop or Turn Signals, and Black Wire is low brightness for Tail or Running Lights. NOTE: If upgrading from halogen bulbs to led, you may need resistors to splice in or you'll have hyper flash on your turn signal..
  • Overall dimensions: Overall length is 14.17 inches approx., and overall width is about 7 inches, and the tail light is about 0.87 inches thick, requiring 13.4 inches long x 6.3 inches hole-to-hole cutout for complete installation. WIRE LENGTH: 8.6inch, 2....
Check Stock