Reviews Din1478turnbuckle

ArkHardware 3/8\ Jaw & Jaw Turnbuckle Open Body Precision Cast Cable Railing Rigging Stainless Steel Type 316 Marine Grade (3/8\ - 1 Piece)

  • ArkHardware 3/8" Jaw & Jaw Turnbuckle open body PRECISION CAST Stainless Steel T 316 Marine Grade..
  • Turnbuckle Bodies are UNC Threads.WORKING LOAD LIMIT= 1300 LBS. 1Pcs= WT-1.25 LBS. END FITTING CAN BE SWITCH AS YOU NEE.
  • PRECISION CAST-DURABLE TYPE 316 STAINLESS STEEL.
Check Stock

Muzata 20Set 1/8" Cable Railing Kit Hardware Heavy Duty Turnbuckle M5 Eye to Eye for Wood Post Wire Rope Stainless Steel Angle Adjustable WoodLoft System Deck Stair 20 Cable Lines CK01,CA4 CA5

  • Industrial style - We took clues from old factories and built this aesthetic industrial interior design system. It is great for build a Wood cable railing system on decks and stairs. It can also act as turnbuckles in clotheslines, picture hanging, string lights, etc. Package Includes: 20pcs M5 eye to eye turnbuckle, 40pcs thimbles, 40pcs eye straps, 40pcs aluminum sleeves, 80pcs screws. This set can build 20 cable runs, including tensioners and terminals.
  • Multi-Angle and Wide-adjustment - The multi-angle turnbuckle could be rotated from 0-180 degrees, it is ideal for both level and angled sections on your deck and staircase. This cable railing kit is designed with a wide adjustable open-body with a wide adjustable range turnbuckle from the max length of 7 inch to min length of 5 inch that is friendly to beginners.
  • Cost-effective and Durable Material - This cable railing kit is a great choice to build cable railings with a low budget. This cable railing fitting works with OD 1/8" cable. This turnbuckle for cable wire rope is made of quality T304 stainless steel and it is durable. Applicable for both indoor and outdoor uses. Please note it can't be uesd for wet and salty coastal areas.
  • Pre-Designed System - We pre-designed a WoodLoft cable railing system ....
Check Stock

Sun Shade Sail Hardware Kit - 6 Inch 304 Stainless Steel Sunshades Canopy Installation Kit for Install Rectangle & Triangle Shade Sails Deck Garden Lawn Patio Outdoor Metal Sail Shade Hardware Kit

  • High Quality Shade Hardware Kit - This 6" rectangle outdoor shade sail installation kit is made of high quality 304 grade stainless steel. The hardware kit is extremely strong and resistant to the elements, This is can to ​support 141s of pounds. High load-carrying capacity to keep your sails stable in wind, suitable for windy areas or large fixtures such as sun shade sail, canopy.
  • Shade sail installation kit Includes - Adjustable turnbuckle x 2pcs, Pad eyes x 4pcs, Snap Hook x 2pcs, Phillips head helical spiral threads screw x 16pcs, Plastic expansion x 16pcs, Morzejar Shade Sail Hardware Kit contains 40 pcs of well made components.
  • Durable Adjustable Turnbuckle - The rectangle sun shade sail kit has adjustable turnbuckle to tighten the sail during installation. You can choose how far your sail shade is from the wall/ post/ point to which it is fixed, Length of turnbuckle: 6.
Check Stock

CENTAURUS 4Pcs 94111 RC Turnbuckle Tie Rod Ends Steering Linkage Servo Link Aluminum Alloy Pull Rod Compatible with Red cat Vol cano 94111 1/10 RC Car Monster Truck 62mm-75mm

  • 【OPTIMAL PERFORMANCE】CENTAURUS premium upgrade RC Turnbuckle Tie Rod Ends Steering Linkage Servo Link is 100% brand new 100% testing during the manufacturing process for reliability, durability and performance..
  • 【HIGH QUALITY】CENTAURUS premium RC Turnbuckle Tie Rod Ends Steering Linkage Servo Link is made of high quality material which can use for a long time..
  • 【WIDE APPLICATION】CENTAURUS RC Turnbuckle Tie Rod Ends Steering Linkage is widely compatible with Red cat Vol ca no 94111 1/10 RC Car Monster Truck.Applicable models: 94101, 94102, 94103, 94122, 94123, 94111, 94188, 94762 94763 and also suitable for DIY model cars..
  • 【MAIN SPECIFICATION 】Adjustable Length: Approx 62mm-75mm.
  • CNC machining accuracy. Increased strength and precision..
  • 【PACKAGE & SERVICE】Package Include: 4Pcs x RC Turnbuckle Tie Rod Ends Steering Linkage .Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty..
Check Stock

COSCOOL Sun Shade Sail Hardware Kit Installation 5 Inch Stainless Steel Hardware Kit for Rectangular Shade Sails

  • A set of shade sail hardware kit for RECTANGULAR shade sails includes Turnbuckle(2pcs), Pad eye(4pcs), Carabineer/hook(2pc),Screws(16pcs),expansion anchor bolts(16pcs),and a installation manual..
  • Stainless steel(304) hardware kit for Rectangular/Square sun shade sails installation..
  • 5 inches means that the length of the turnbuckle can be adjusted from 5 inches to 6.5 inches, By tightening the turnbuckle to generate tension, which can make your shade sails stable..
  • High load carrying capacity, and stainless steel has rust-proof properties, so it is especially suitable for outdoor use..
Check Stock

Muzata 10Set 1/8" Cable Railing Kit Hardware Turnbuckle M5 Eye to Eye CK01 and 165Ft Wire Rope WR01 and CR12 for Wood Post Stainless Steel Angle Adjustable WoodLoft System 10 Cable Lines,CA4 CA5

  • Industrial style - We took clues from old factories and built this aesthetic industrial interior design system. It is great for build a Wood cable railing system on decks and stairs. It can also act as turnbuckles in clotheslines, picture hanging, string lights, etc. Package Includes: 10pcs M5 eye to eye turnbuckle,20pcs thimbles,20pcs eye straps,20pcs aluminum sleeves,40pcs screws,1pcs cable cutter,330ft wire rope. This set can build 10 cable runs, including tensioners and terminals.
  • Multi-Angle and Wide-adjustment - The multi-angle turnbuckle could be rotated from 0-180 degrees, it is ideal for both level and angled sections on your deck and staircase. This cable railing kit is designed with a wide adjustable open-body with a wide adjustable range turnbuckle from the max length of 7 inch to min length of 5 inch that is friendly to beginners.
  • Cost-effective and Durable Material - This cable railing kit is a great choice to build cable railings with a low budget. This cable railing fitting works with OD 1/8" cable. This turnbuckle for cable wire rope is made of quality T304 stainless steel and it is durable. Applicable for both indoor and outdoor uses. Please note it can't be uesd for wet and salty coastal areas.
  • Pre-Designed System - We pre-designed a ....
Check Stock

JCBIZ 4pcs M10 Turnbuckle Screw Hook to Eye Strainer Fence CO Open Body Draw-in Bolt 304 Stainless Steel Adjustable Wire Rope Tensioner

  • Type: CO Open Body Hook to Eye Adjustable Turnbuckle.
  • Material: High quality 304 stainless steel, high hardness, anti-rust, anti-corrosion, wearproof, waterproof, safe and durable, long service life..
  • Function: Special turnbuckle for wire rope tightening up and straightening. Screw the bolt to release or tighten wire rope..
  • Package: 4pcs M10 Hook to Eye Turnbuckle.
Check Stock

Hedume 12 Pack M4 Hook & Eye Turnbuckle for Cable Wire Rope Tension 304 Stainless Steel Heavy Duty Wire Rope Tension for DIY String Light Picture Hanging Garden Wire Fence Gate Wire Tent Rope

  • Durable Material - Hedume turnbuckle for cable wire rope is made of quality 304 stainless steel, which performs superior in corrosion and rust resistance, durability and strength. Silica sol precision casting..
  • M4 Turnbuckle Hook and Eye - Comes with 12pcs 304 stainless steel turnbuckle wire tensioner. With working magnetic. Applicable for both indoor and outdoor use..
  • Easy Installation - M4 turnbuckles easy to use and remove, with a simple twist to increase/reduce tension, allows for tensioning the cable for a tight and tidy look! It can ensure the simplicity and firmness of the installation!.
  • Standard Size - Strong rust-proof body, 4.2 inches closed and 6 inches fully opened, adjustable length..
  • Application - Suitable for tighten taut rope, chain, other rope and regulate the elastic effect, such as stage lighting safe rope, tent rope, corridor rope, clotheslines, hanging rope, photo, picture or paint exhibition display etc..
Check Stock

Hayn T-Bolt Toggle Jaw 1/2in Left Hand Thread

  • 250 feet of 1/8” galvanized cable, 7 strand cable constructed 1700 pound breaking strength.
  • 6 standard turnbuckles(see picture number 2 for the type of turnbuckle you will receive), 6 eye bolts 5” (bolts mount directly to the end frame sections and are attachment points for the turnbuckles), 6 eye bolts 8” (used to support the cable on the middle section or sections) (the extra length creates a gap between the frame and the net, preventing ball deflection directly off the frame).
  • 70 heavy-duty zinc coated steel netting spring clips(carabiner clips)(simply attach the net to the cable using these spring clips to finish installation).
  • Provides enough hardware to install 3 lines on up to four frame sections and up to 80’ long tunnel nets. Everything you need to install your batting cage netting.
Check Stock