Reviews Digital Audio Output Pcm

Wiistar Fiber Optical Decoder Support AC3/DTS/Toslink Coaxial Digital to Analog Audio L/R Decoder 3.5mm Earphone

  • Converts Digital, DTS, PCM digital audio (up to 5.1CH) to 2CH analog stereo audio.
  • Support dts, Supports digital audio input: Optical SPDIF (Toslink) or Coaxial.
  • Supports simultaneous RCA L/R and 3.5mm Headphone output.
  • Support all digital SPDIF audio formats including PCM 32KHz/44.1KHz/48KHz/96KHz, Digital 5.1 and DTS.
  • Adopts 96KHz/24bit ADC & DAC chips for superior audio quality.
Check Stock

Optical to RCA, Digital to Analog Audio Converter, Optical to RCA Converter with Volume Control, DAC Converter Supports Sampling Rate Highest 192KHz, 24bit, Digital Audio Converter with Remote, Optica

  • Digital to Analog Audio Converter: Converts coaxial or toslink digital PCM audio signals to analog L/R RCA audio ( NOT capable of being reversed)Note: Some products have updated the remote control, the remote control does not have AAA batteries and needs to be configured by yourself.
  • Supports Sampling Rate at 32KHz, 44.1KHz, 48KHz, 96KHz and 192KHz.
  • 24-bit S/ PDIF Incoming Bit Stream on Left and Right Channels, Support speakers and headphones play simultaneously. Make sure your TV audio OUTPUT setting is changed from TV speaker to "External Speaker" or "External Speaker(optical).
  • Support REMOTE Control: With IR wireless remote control, easily adjust volume/ choose coaxial or toslink input/ Mute/Power ON or OFF by using the IR wireless remote, no need to leave the comfortable couch.
  • In order to received signal better PLEASE make sure the remote is FACING the infrared IR indicator on the converter..
  • Supports Uncompressed 2-channel LPCM or PCM Digital Audio Signal Output.
  • (5.1 channel is incompatible, Some TV may have PCM / LPCM as the default setting. If not, please set the PCM or LPCM setting as below: Setting--sound--audio format.), Not Support Dolby, DTS, or other surround sound signals.
  • Provides Electromagnetic-noise-free Transmission, The Digital....
Check Stock

VIMVIP 3 Way in/Out Digital Toslink Optical Audio Splitter Manual Switch with 2.6ft Fiber Optic Cable-Black

  • Optical Splitter 1 to 3: This Firber Optic Splitter Adapter can spits into 3 female Toslink, Compatible with Male Toslink cables..
  • 1 to 3 In/Out: Two ways you can choose, connect one signal digital audio sources input to three digital audio output or three toslink optical audio input signals switch to one toslink optical output. Switching with ease by just turning the selector dial but only one can be selected at a time..
  • Application: Compatible with HDTV, Blu-ray DVD player, PCM, Dolby Digital, DTS, XBOX360, PS3 to home theater, expands the capacity of a home theater's A/V Inputs. PCM, Dolby Digital DTS signals can pass through this unit. Bring you more convenience..
  • This Optical Splitter Switcher can be used to connect 3 digital input devices together by Toslink connection to one input on the destination audio player, speaker, amplifier, receiver, HDTV or home theater system, output connects directly into TV Of home theater receiver.Let you enjoying your leisure time..
  • What You Get: VIMVIP 3 Way In / Out Digital Toslink Optical Audio Splitter Manual Switch with 2.6ft Fiber Optic Cable-Black and our Our fan-favorite 12 months warranty and friendly customer service..
Check Stock

DAC 192KHz Digital to Analog Audio Converter Aluminum Signal Converter Optical to RCA Converter with Optical Coaxial Cable Toslink Optical to 3.5mm Adapter for PS4 HD DVD Home Cinema Systems

  • 【Rybozen 192KHz Audio Converter】For the convenience of use, we are equipped with an optical fiber cable and a power adapter. This audio converter with 3.5mm jack audio can convert coaxial or optical digital PCM audio signals to analog RCA L/R and 3.5mm jack audio simultaneously..
  • 【How to Use】In order to enjoy pleasant music, please set your DVD or music player audio output to PCM or LPCM. This audio converter supports uncompressed 2-channel LPCM or PCM digital audio signal output. Not available for 5.1 channel..
  • 【Multiple Sampling Rates to Meet Your Needs】This digital to analog audio converter supports sampling rates of 32, 44.1, 48, 96 and 192KHz. And it is the 24*bit S/PDIF input bit stream of the left and right channels. Provides perfect noise-free, no electromagnetic transmission..
  • 【Wide Application Scenarios】Easy installation, simple operation, plug and play. Familiar Signal Input: Toslink, RCA (coaxial).
  • Suitable for party and home, such as PS3, PS4, Blu-ray player, HD DVD, home theater system, AV amplifier..
  • 【Thoughtful Service】Rybozen provides 24-hour online technical support and 30-day refund. We are at your service. If you have any questions, please feel free to contact us..
Check Stock

NEWCARE 4K@60HZ HDMI 2.0b Audio Extractor, HDMI Audio Converter Adapter,HDMI to HDMI + Optical Toslink SPDIF + 3.5mm AUX Stereo Audio Out, Support HDMI ARC, HDCP 2.2, RGB 8:8:8,3D (Metal Black)

  • ★[Upgrade HDMI Audio Splitter Extractor]- One HDMI Input to one HDMI Output(Pass Mode), Toslink SPDIF (Optical) digital audio output(2.0CH/5.1CH Mode), and 3.5mm stereo audio output(2CH Mode), achieving the synchronization of audio signal separation, guarantees audio and video transmission with high-fidelity and lossless-This HDMI Audio Splitter Extractor comes with high speed HDMI cable..
  • ★[HDMI 2.0b Specification compliant]- Our HDMI 2.0b Audio Extractor supports up to 4Kx2K at 60Hz RGB4:4:4, Ultra HD/3D, HDR, ARC(Audio Return Channel).
  • Supports HDCP2.2 with 18Gbps bandwidth and 24/30/36 bit deep color.(Note: You must plug in the HDMI ARC port when starting the ARC function.).
  • ★[Three Audio EDID Settings]- There are Pass, 2.0CH and 5.1CH three kinds of audio mode options. 3.5mm audio output supports 2.0CH PCM LPCM stereo audio. Toslink SPDIF Output supports 2.0CH PCM, 5.1CH Dobly Digital, Dobly TrueHD, DTS-HD, DTS. (Note: Our Audio Extractor can’t decode these audio formats. If your Amplifier or soundbar can’t support these audio formats, there will no audio on your soundbar or amplifier, so please set audio format on HDMI Source to PCM/ LPCM audio format.).
  • ★[Wide Compatibility]- This 4k HDMI Audio Extractor is suitable for most devices w....
Check Stock

CAMWAY Digital to Analog Audio Converter,HDMI ARC Audio Extractor HDMI Audio Return Channel,with Digital HDMI Optical SPDIF Coaxial and Analog 3.5mm L/R Stereo Audio Converter,Coaxial to 3.5mm and RCA

  • 【 2 in 1 HDMI Audio Return Channel+DAC Audio Converter 】The HDMI audio return and digital-to-analog audio converter can output the TV's sound to the optical fiber coaxial 3.5mm coaxial headphone jack (can output sound at the same time) through the HDMI ARC interface. It also supports conversion of digital audio fiber or coaxial signals to analog stereo signals..
  • 【How to Connect 】When as HDMI ARC, You need to use a standard HDMI cable to output the TV's sound to the optical fiber, coaxial, R/ L, 3.5 mm headphone jack through the HDMI ARC interface (can output sound at the same time),,,When as a Digital to Analog Audio Converter, You can also use digital audio coaxial and optical ports as signal source input to convert to analog audio R / L, 3.5mm output..
  • 【HDMI Audio Return Channel】 HDMI ARC Audio Adapter Can be Connected to HDTV that Supports ARC, and Output Audio from TV to Sound Bar, Power Amplifier, Speakers or Headphones (Note: please make sure to use standard 19 +1 HDMI cable.).
  • 【PCM / LPCM 2.0CH audio Format】 Support 32KHz, 44.1KHz, 48KHz, 96KHz and 192KHz Sampling Rate. (Note: If using stereo R/L or 3.5mm jack output, this unit only supports LPCM/PCM audio format output, not 5.1 audio output.).
  • 【 Easy to Install & Remote Volume C....
Check Stock

Digital to Analog Audio Converter, 192KHz DAC Digital Coaxial and Optical Toslink to Analog 3.5mm Jack and RCA (L/R) Stereo Audio Adapter for PS3 HD DVD PS4 Amp HDTV Home Cinema

  • Digital to Analog Audio Converter: Converts coaxial or toslink digital PCM audio signals to analog L/R RCA and 3.5mm Jack audio simultaneously ( not capable of being reversed). Can be Used for PS3, PS4, Xbox, Blu-ray Player, HD DVD, Home Cinema Systems, AV Amps, Etc..
  • 192KHz Sampling Rate Achieved: Supports Sampling Rate at 32KHz, 44.1KHz, 48KHz, 96KHz and 192KHz.
  • 24-bit S/ PDIF Incoming Bit Stream on Left and Right Channels..
  • Electromagnetic-noise-free: Supports Uncompressed 2-channel LPCM or PCM Digital Audio Signal Output.
  • Provides Electromagnetic-noise-free Transmission(5.1 channel is incompatible, please set the audio output to PCM or LPCM)..
  • Metal Material, Anti Shock: Gold Plated Aluminum Can Reduce Interference and Make the Connection Stronger. Stable Connection Brings a Good User Experience..
  • Input Audio Connector: All cables included. 1 x Toslink, 1 x RCA (Coaxial).
  • Output Audio Connector: 2 x RCA(R/L), 1 x 3.5mm Jack.
  • Powered by 5.5mm USB Power Cable (Power Adapter is NOT Included).
  • Do Not Use Other Plugs, It Can Only Use 5V 1A Plug..
Check Stock

iArkPower HDMI Audio Extractor Splitter HDMI to HDMI + Optical + RCA L/R Stereo Audio Out Supports 3D (1080P)

  • Extract Audio from HDMI: One HDMI Input to One HDMI Output, One SPDIF Audio Output and One RCA R/L Stereo Audio Output. Note: DO NOT plug TV to HDMI IN port because TV’s HDMI ports do not send out signal.
  • A Perfect Solution: Designed to split 5.1CH/2CH audio from HDMI device like PS3/4, Chromecast, Blu-ray player, cable box, Fire TV, Apple TV, etc. Perfect to use if your receiver/sound bar/surround system does not have HDMI input. Note: Not support HDMI ARC (Audio Return Channel).
  • Three Audio EDID Settings: 2CH, 5.1CH and Pass for different configurations. Optical SPDIF Output supports incoming 2CH PCM, 5.1CH Dolby Digital, DTS (Note: Not support Dolby Digital Plus, Dolby TrueHD and above).
  • RCA L/R Output supports incoming 2CH PCM stereo audio.
  • Premium Quality: Supports Full HD 1080P, 3D and 36-bit deep color with sync sound.
  • made by metal enclosure for excellent heat dissipation and longevity.
  • Packing & Warranty: 1x HDMI Audio Extractor Converter, 1x 5V/1A (support 100V-240V input) power adapter, 1x User Manual.
  • Plug and Play & One year hassle free warranty.
Check Stock

1080P HDMI Audio Extractor,AMANKA HDMI to HDMI Audio Optical and RCA(L/R) Stereo Analog Outputs Video Audio Splitter Converter for Ruku,Chromecast, Blu-ray Player, Cable Box, Fire TV, etc

  • 【HDMI Audio Extractor】Extract the digital hdmi audio signal from the HDMI input and convert it to 2 channel analog stereo R/L output or 5.1 channel S/PDIF Audio output.
  • Your equipment and cables need to be consistent resolution.
  • Note that ARC functionality is not supported.
  • 【High Denfinition】Supports 24 bit /deep color 30bit, 36bit per channel (36bit all channel) deep color.
  • Supports HDCP, Video EDID Pass Through, Input resolution up to 1080p (50/60Hz), 1.4 HDMI, 3D.
  • 【Supports Multiple Audio Formats】Analog RCA L / R output particularly supports 2CH PCM stereo audio. SPDIF Output supports 2CH PCM, 5.1CH Dolby Digital, DTS Audio (Dolby Digital Plus not supported). This Audio Extractor will output the Dolby True-HD, DTS-HD, AC3, DTS, DSD audio format, But can’t decode these audio formats..
  • 【Wide compatibility】Suitable for various HDMI source devices like Roku or Chromecast without dedicated audio output as well as Blu-ray/ DVD/ HD player, cable/satellite box, Amazon Fire TV, HD TV, PS3/4, Xbox, PC/laptop, HD camera, HD DVR etc.
  • It is not recommended to use DVI as a signal source!.
  • 【Three NEW Audio EDID Settings】Pass, 2CH and 5.1CH, Support 3D video (To get 3D, all units connected to the splitter outputs must support 3D). Plug and Play.....
Check Stock