Reviews Diesel Pressure Gauge

OTC 4200 Nozlrater Diesel Fuel Injector Nozzle Tester

  • Ultimate tool for diagnosing a number of problems that affect diesel fuel injector nozzles.
  • Enables technicians to check for leakage, pop-off pressure, spray pattern, and chatter.
  • This tool will accommodate a wide range of injectors.
  • Features a rugged, lightweight reservoir that holds 7/10 of a gallon of fuel.
  • Equipped with a replaceable 2-micron filter.
  • large, dual-scale, high-pressure gauge is protected by a guard and includes an indicator needle to record....
Check Stock

6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool, High Pressure Oil Rail Adapters Leak Test Kit and 6.0 IPR Valve Socket with Seal Kit Fit for Ford 6.0L Powerstroke Diesel Engine

  • Fitment: IPR Valve Air Test Fitting and Oil Rail Adapters perfectly fit for Ford 6.0L powerstroke diesel high pressure oil system.
  • 6.0 IPR Valve Socket compatible with Ford 6.0L and other diesel engines, and Seal Kit fits for 2003-2010 Ford 6.0L V8 Diesel Turbocharged Modles.
  • High Quality: High Quality Machined from Brass or Steel with excellent mechanical and physical properties, these tool kit show their high tightness, corrosion resistance and durability.
  • Oil Rail Adapters: Both brass adapters use standard 1/4" NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air.
  • IPR Valve Air Test Fitting : This tool has 1/4 inch pipe threads to accept standard air fittings.
  • It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.
  • 6.0 IPR Valve Socket with Seal Kit: Use with 3/8" square drive, 12 point design socket can tightly locate your IPR valve in a very tight location, also built to bottom out on the hex so it does not put torque on the connector in case it can be reused (Include IPR Valve Seal Kit OE Number 3C3Z9H52....
Check Stock

YSTOOL 8PCS Engine Compression Tester Kit Automotive 300PSI Cylinder Pressure Test Gauge Tool Set for Auto Car Truck Motorcycle Gasoline Petrol Gas Engine Diagnostic with Red Case

  • ...r head or defective main gasket, poorly seated or worn piston rings, etc. Please note, a variation in compression readings between cylinders is often a better indication of engine problems than the absolute values of compression.
  • There are 4 sizes of brass adapters and 2PCS universal push-on connectors in the engine pressure tester kit. The 10mm 12mm 14mm 18mm adapters can be connected to the corresponding size cylinder head. The straight push-on connector and the curved one use rubber cone tip, can be pushed against on the cylinder head, universal for almost all the size cylinder head.
  • The engine cylinder compression test tool kit can be widely used for most type and depth spark plug well. If you have motorcycle car truck ATV mower and any other vehicles with gasoline or gas engine, and you are a professional on repairing vehicles, you can try this kit. Please note, this cylinder compression test gauge is not suitable for most diesel engine, because the range of the gauge is only 0-300PSI, which is much lower than most diesel engine compression..
  • The pressure gauge is equipped with 3" big dial, protected by rubber cover. It has pressure holding function, please press the pressure release valve before disconnect. After insert the hose and push-on connec....
Check Stock

JoyFans Oil Pressure Tester Tool, 0-140PSI Oil Pressure Gauge Kit for Fuel System Mechanical Sensor Engine Cylinder Compression Test with Hose Adapters for Cars ATVs Trucks Use Red Case

  • Fuel Injector Pump Pressure Check: Engine oil pressure test tool kit is designed to test oil pump pressure and check operation of fuel system components. Compare the measured pressure value to the standard reference range from manufacturer, we can take quick and accurate diagnosis and feasible solution on the oil pipeline leakage and engine wear, so as to confirm if the oil pressure gauge has been damaged. No more reliance on the dashboard light..
  • Oil Pressure Tester: The petrol engine cylinder tester kit has a shockproof rubber casing and a large clear dial with readings from 0~140 psi and 0~10 bar for easy and accurate work on both American and metric systems. Keeping the gauge safe from bumps and drops. Built-in hose assembly also comes with a side pressure relief button for instant pressure reset and no repeated hose disconnect, and 4 ft long flexible hose with convenient quick coupler for simple adapter installation and removal..
  • Durable Construction: 11-piece metal adapters are all made with heavy-duty forged steel and brass hardened for maximum strength and longevity.
  • designed to withstand extreme pressure in any situation for professional use. Each thread adapter marked with number, features black oxide finish to resist rust and corrosion.
Check Stock

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

  • FUEL PRESSURE GAUGE TESTER: Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines. Specific tool for fuel system detecting and troubleshooting. Fuel pressure gauge kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
  • UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
  • 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color cod....
Check Stock

ZKTOOL 11PC Compression Tester, Automotive Engine Compression Tester Adapter Kit, Engine Cylinder Leak Down Compression Test Motor Pressure Gauge. (All Vehicles).

  • Function: The cylinder compression tester kit is used to quickly and accurately test the cylinder pressure of gasoline engines. Meter readings can help diagnose the following problems: stuck valve, carbon deposits, cracked cylinder head or defective main gasket, poor or worn piston ring installation, burned or damaged piston..
  • Packing: Including 10 connection adapters --- 11-in-1 engine tester gauge kit including 1 piece spring buckle gauge.
  • 5-piece brass adapter M10, M12, M14, M16, M18, widely used.
  • a 200mm metal Extension rod connector, two 50mm metal aluminum rod straight and bent rod, an extension rod hose with M12*1.25 thread..
  • Application: Gasoline engine cylinder --- equipped with different sizes of rotating and push-in adapters, widely used in most types of gasoline gasoline gas engine cylinders and deep spark plugs, common in motorcycles, lawn mowers, cars, trucks, ATV and many more. Not suitable for diesel engines..
  • Stable quality tester: Maximum 300PSI or 20BAR dual pressure device, with easy-to-read large dial, acrylic glass meter cover with scratch-resistant coating and rubber protective cover with excellent shock absorption performance. The built-in one-way valve with pressure holding function ensures that the pressure gauge obtains the ma....
Check Stock

FIRSTINFO A1601 4 in 1 Intake Valve Cleaner Combustion Chamber Cleaner/Vacuum System Cleaner/Vacuum System Pressure Tester Kit

  • 【 Maintain Engine Performance 】 Perfect for air intake system, combustion chamber, EGR Valves, intake valves and oxygen sensors. Easy operation for making the fuel injectors spray smoothly and properly..
  • 【 Easy to Use 】 Simply fill with air intake cleaning liquids and connect the vacuum hose of vehicle vacuum system. Reduce carbon deposits easily..
  • 【 Multiple Applications 】 Use to clean the intake valve, combustion chamber, vacuum system and test the vacuum system pressure. Provides more thorough cleaning than other methods. Effectively remove engine carbon deposits and increase gas mileage performance..
  • 【 Equipped with Negative Pressure Gauge 】 The liquid-filled gauge for accurate vacuum pressure reading and monitoring chemical flow..
  • 【 Gasoline Engine / Petrol Cars Use 】 Used for gasoline engine injection and petrol cars. "NOT" for diesel injector. And solution liquid is "NOT" included..
  • 【 100% Genuine Guarantee 】 We provide you quality assurance tools with 12+10 months after-sales warranty (10 months warranty by register) support. Help you to achieve the satisfactory shopping experience..
Check Stock

OTC 3674 Diesel Fuel Pressure Tester

  • OTC's Diesel Fuel Pressure Tester features simple one wire connectivity to the fuel pressure sensor signal wire.
  • Designed for diesel engines that have a fuel pressure sensor reading used by vehicle computer.
  • readings alternate between current and maximum pressure.
  • Molded plastic storage case keeps the tool protected when not in use.
Check Stock

YSTOOL Oil Pressure Tester Kit Professional Oil Pressure Gauge Tool for Engine Diagnostic Test with Hose Adapters and Carry Case for Cars ATVs Trucks Use 0-140psi

  • The engine oil pressure tester kit is used to diagnose and test the engine oil pressure value, to check whether it is normal. Prevent engine failure due to lack of oil. And with this best in class tools, you can get a definite pressure value well without relying on the dashboard light..
  • There are 10 types of thread adapters are suitable for most cars, motorcycles, boats and other vehicles with gasoline and small diesel engines. As long as the adapters can match with your engine and oil pressure does not exceed 140 PSI. The 10 adapters are marked with number, you can choose the right one very easy..
  • The pressure gauge uses metal gauge head with shockproof rubber cover, 3" big dial with clear dual scale range 0 to 140 PSI and 0 to 10 Bar. Compare to a large range, this oil pressure gauge is easy to read about 1-2 Bar with a short range. There are a straight quick coupler and a elbow one in the case, you can choose it according to the location of the engine oil pressure test port..
  • Steel adapters, brass quick couplers, are featured with high hardness, rustless, durable and good air sealing. The 4FT long hose is made of rubber nylon resin with MAX. working pressure 300 PSI. There are also a small bag of seal gaskets, which are used for replacing the ones on....
Check Stock