7/8 in Diamond Hole Saw 7/8 inch for Porcelain Tile Drill Bit Glass Drill Bit Diamond Tip Bit with Core Guide to Hold in Place and Prevent Jumping 5mm Porcelain Drill Bit for Ceramic Tile 22mm

  • 7/8" Diamond Hole Saw 22mm PROFESSIONAL QUALITY DIAMOND Drill Bit Bigger Diamond Grit Pieces Cut Better Keep Cool.
  • DIAMOND DRILL CORE GUIDE INC. Just Tape Hold In Place No More Fingers Crossed It Doesnt Move Or Jump.
  • DIAMOND HOLE SAW BITS Cut Porcelain Granite Countertops Ceramic Glass Tile Blocks And Wine Bottles.
  • DIAMOND CORE BITS FIT ANY STANDARD DRILL CHUCK Using Hammer Drill Or Not Keeping Cool Will Wear Fast.
  • TRADE SECRET Remove From Hole Every 15 Secs Dip In Water Get Water In Hole Will Stop Material Crack.
Check Stock

Delta Diamond Brick Boss 14 Inch Diamond Blade, 1\-20MM Arbor, Wet/Dry Cutting Brick, Pavers, Stone (14\)

  • BRICK CUTTING - Use Brick Boss diamond blades for cutting brick (up to 5,000 psi), most types of stone such as granite and quartzite and similar materials. Not intended for use on materials such as concrete, asphalt, concrete block or sandstone..
  • EXTRA WIDE U SHAPED SLOTS - Features 10MM tall diamond segments with deep and wide U shaped slots. The wide slots allow for better cooling and faster removal of the cutting debris, thereby increasing cutting speed..
  • HEAT TREATED HIGH-SPEED STEEL - The core is made from heat-treated high-speed steel and is guaranteed to withstand the demands of dry cutting..
  • SPECIFICATIONS - Blade measures 14" diameter X .125 (1/8") thick with a 1" arbor hole and 20mm bushing for Stihl power saws. It can be used on masonry saws, hand-held power saws and bridge saws. Operating RPM is 2,500. Max. safe RPM is 5,460..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the d....
Check Stock

8 Oz Attack Epoxy Adhesive Removal Solvent for Metals Stones Glass Wood Glue Removing Residue Dissolving Jewelry Cleaning Solution

  • RCD Technology - Reinforced Compound Diamond Technology, a new concept and invented technology of diamond segment production. RCD segment shows excellent diamond keeping ability with high durability against impact and abrasion. Check product description for more information..
  • REMOVING - Ideal grinding cup for removing Urethane, Epoxy, Glue on concrete floor. DOUBLE diamond layer for effective removing work..
  • COMPETITIVE & ECONOMICAL - This is economical and price competitive than typical PCD grinding cups in the market..
  • RUBBER CUSHIONED CORE - The rubber cushioned sandwich core enables user-friendly use. This absorbs noise and vibration. Sandwich type : Steel + Rubber + Steel..
  • MINIMUM DAMAGE - Spike Grinding wheels minimize the damage caused to the floor, for clean and effective work..
Check Stock

Delta Diamond Cougar HS 14 Inch 3-Pack Segmented Diamond Saw Blade, Premium, General Purpose Cutting of Concrete, Masonry, Pavers, Stone, .125 X 1\-20mm Arbor (14\ 3pcs)

  • GENERAL PURPOSE - Cougar HS diamond saw blades are for general purpose cutting of soft to medium aggregate cured concrete, masonry, concrete or clay pavers, various types of stone and all similar materials. Not recommended for reinforced concrete with rebar, green concrete, or asphalt applications. View our other blades by Delta Diamond like the Cougar HD, Cougar S or the Kick-Asphalt Diamond Blade instead..
  • 12MM SEGMENTS - Premium grade 12MM tall diamond segments are designed for long cutting life with fast, smooth cutting in a wide range of materials..
  • WET OR DRY CUTTING - The center core is made from a tensioned, heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting..
  • SPECIFICATIONS - 3 Pack of 14" diameter X .125 (1/8") thick and has a 1" arbor hole with 3/8" drive pin hole and 20mm bushing. Max 5,460 rpm. For use with hand-held power saws, 5-20 hp concrete saws, or masonry saws..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond bet....
Check Stock

Delta Diamond Cost Cutter 7 Inch Segmented Diamond Blade, DM-7/8\-5/8\ Arbor, General Purpose Cutting/Grinding Concrete, Masonry, Stone, & Similar Materials (7\)

  • STANDARD GRADE - Standard grade diamonds deliver the best combination of cutting speed and tool life at a low cost per cut..
  • GENERAL PURPOSE - Use on a wide variety of materials such as concrete, masonry, brick, block, stone, and similar materials..
  • USE WET OR DRY - Heat-treated high-speed steel core is durable enough to withstand dry cuts. Use with water for increased performance..
  • SPECIFICATIONS - 7" diameter X .090 thick with a Diamond-Knockout / 7/8" arbor hole. Included is a 5/8" bushing for adapting to any hand-held grinder, circular saw, or trim saw. The maximum safe operating speed is 8,730 RPM..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock

Cougar HD Supreme Wet Concrete Diamond Core Drill Bit 13″ Diameter X 1-1/4″-7 Threaded Arbor for Drilling Reinforced Concrete with Rebar, Hard Concrete, Granite, Brick, Block, & More (13-inch)

  • Use Cougar HD Supreme wet diamond bits for drilling cured concrete with light to medium steel reinforcing. Heat-treated steel core barrels are designed to withstand the demands of high pressure..
  • The pointed segments reduce drag and penetrate quickly. The result is faster, straighter holes and higher productivity. Also great for drilling brick, block and various stone materials..
  • Use with all wet rig-mounted core drilling machines..
  • Specs are 13″ Diameter X 15″ barrel length x 1-1/4″-7 Threaded Arbor. 15″ barrel length, 17″ overall length (arbor + barrel)..
  • This concrete diamond core bit is US made and has a lifetime warranty with free return shipping. If it ever breaks, warps, cracks or shows any indication of a material defect (being used for its intended purpose), or if the bond between the diamond segment and the steel core becomes separated at any time, it will be replaced free of charge!.
Check Stock

Stadea CBD106N Diamond Concrete Hole Saw 5 Inch Core Drill Bit For Concrete Brick Block Stone Masonry, Laser Welded Wet Dry 1 1/4-7 Thread

  • 5 Inch Diamond Concrete Core Drill Bit Hole Saw, 17 Inch Tall Designed for drilling hard Concrete, Rebar, masonry, hard brick, Granite, and other hard materials.
  • Laser Welded Diamond Segments for extra joint strength needed to cut hard concrete and other hard materials effectively.
  • 17″ High tube length, with 1 1/4″-7 arbor, Fit known brand core drill rigs.
  • Designed to cut either in wet or dry use, for longer life span use wet.
  • 10 Pieces diamond Segments with high diamond concentration. each segment is 10 MM High, 4 MM thick and 24 MM wide.
Check Stock

TALOOS 2-1/2″ Wet Drill Core Bits for Concrete and Hard Masonry, Diamond Core Drill Bits for Marble, Granite, Rocks and Bricks | 15-3/4″ Drilling Depth, 10mm Segment Height, 1-1/4″-7 Arbor | Wet Only

  • 【DIAMOND WET CORE DRILL BIT】It comes with a 2-1/2″ Wet Drill Core Bits. This core bit can be used for wet drilling to meet your work needs. Start drilling from a vertical position and continue digging deeper. A small amount of water can extend Long life. If you are looking for a reliable core drill, this is a good choice!.
  • 【WILDLY COMPATIBILITY】The size of this wet drill core bits is 2.5″/63mm Diameter & 15-3/4″ Drilling Depth & 1-1/4″-7 Arbor, 1-1/4″-7 universal thread let it can be easily and quickly assembled to a standard stationary coring machine or a handheld drill. 15-3/4″ drilling depth can meet most drilling depth needs. It also works with a variety of devices, easy to carry, greatly helping you with drilling tasks..
  • 【UPGRADED DESIGN】Our diamond wet core drill bits feature chip removal holes, not easy to be stuck when drilling. Adopt highly regular serrations, and concentric shaft design, the innovative design enables high drilling performance while maintaining a long service life..
  • 【PREMIUM QUALITY】The drill body of this wet core drill is composed of 20 steel, and the drill tooth part is composed of Cobalt Powder & D92 Diamond, which can ensure a longer coring life. Better details and surface treatment technology t....
Check Stock

3 inch concrete diamond hole saw - Granite Tile Masonry Stone Marble Wet Dry Core Drilling Coring Drill Bits by STADEA

  • Stadea 3 inch concrete masonry granite tile diamond hole saw bit core drill bit for stone coring core drilling cutting.
  • Wet Dry Drill/Core through Concrete, Granite, Masonry, Tile, Stone, Marble sharply with precision.
  • Aggressive and durable diamond segments, Segment Height 9 MM, Width 24 mm, Thick 3.5 mm.
Check Stock