Reviews Diamond Blade For Cured

Makita 2 Piece - 4.5” Turbo & Segmented Diamond Blade Set For 4.5”+ Grinders & Circular Saws - Ultra-Fast & Lasting Cutting For Concrete, Masonry & Brick - 5/8”, 20mm & 7/8” Arbors

  • ✅ 2 Makita 4-1/2” Premium Segmented + Turbo Rim Diamond Blades For FAST & RELIABLE Concrete, Cinder Block & Brick Cutting | 4 1/2" x 0.79 x 7/8-Inch Arbor, Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor.
  • ✅ CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry.
  • ✅ 1 SEGMENTED Steel disc is ideal for safe and continuous use with minimal warpage risk due to its advanced air flow cooling technology | RELIABLY & EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block & brick cutting in Wet or Dry conditions over an extra-long life span due to Makita’s Premium High Quality Industrial Diamonds, and Makita’s proprietary industry leading bond matrix that allows for optimal diamond exposure-to-bond wear ratio.
  • ✅ 1 TURBO Steel disc is ideal for quicker and faster cuts in Concrete & Masonry | AVOID BLADEWEAR & Slow Downs with lower priced blade....
Check Stock

EZARC 5 inch Diamond Blade, Segmented Stone Expert Diamond Saw Blades for Angle Grinder, 5\ Stone Blade for Cutting Concrete Granite Masonry Brick (2-Pack)

  • ★【Stone Master】EZARC diamond blade is designed for aggressive cutting on masonry materials such as granite, concrete, nature stone and brick. Whether you are a construction worker, plumber, tile installer, roof worker, paver, DIY enthusiast or work at your home studio, this cutting blade is the perfect for you..
  • ★【Speed-optimized cutting】EZARC has increased the cutting speed of its new Stone-Master Segmented rim diamond saw blade by 30% to meet the current market requirement for speed..
  • ★【Long Service Life】Thanks to premium diamond grit with hardness HRC90+ and special dimensional arrangement, our grinder masonry blade has maximum cutting life. This angle grinder concrete blade guarantees a much longer lifetime for heavy duty cutting demands..
  • ★【Fit Tools】 EZARC 5" diamond blade is suitable for most tile saws and hand-held angle grinders with a 7/8" Arbor. Disc Size:5 Inch.
  • ★【Reliable Safety】This 5 Inch diamond blade for angle grinder is manufactured with high strength alloy steel and prime diamond matrix, which ensure spark-free cutting without burning marks on hard materials. Universal for dry or wet cutting..
Check Stock

GoYonder Super Thin 4.5\ Grinder Blades Tile Blade, Diamond Saw Blade for Cutting Porcelain Tiles Granite, 115mm Tile Cutting Blade for Angle Grinder

  • 【Size & Material】: This tile blade is made of quality metal alloy with diamond grains, which is durable and high strength. Available in various sizes to choose, the size is: 115 x 10 x 1.2 x 22.23mm, Thickness: 1.2mm, Outer Diameter:115mm /4.5 inch, 7/8” arbor, Diamond concrete saw blade has a tough body with 1.22mm thickness..
  • 【Grinder Blades Wet & Dry】: This tile blade 4.5 features a 10mm diamond rim, Super thin porcelain saw blade with free chips for cutting, Matched with hand-held machine with a 7/8" or 5/8" Arbor, It can be used on different types of angle grinders and tile cutters, Ideal for Wet and Dry cutting. Furthermore, it is easy to install and ready to use..
  • 【Turbo Rim Design 】: The wet tile cutting blade has turbo rim edge help to increase the work efficiency, strong body and excellent material formula, high quality diamonds can efficient cutting and provide longer service life. They have the right thickness, thin enough to minimize loss of material but thick enough not to drift during cuts..
  • 【High Performance】: Diamond saw blades comes with X teeth offer fast and smooth cutting. High-Performance diamond matrix provides long life and enhanced material removal. this blade cuts through porcelain like butter. 1.2mm thickness....
Check Stock

EZARC 4-1/2 inch Diamond Blade, Segmented Stone Expert Diamond Saw Blades for Angle Grinder, 4.5\ Stone Blade for Cutting Concrete Granite Masonry Brick (2-Pack)

  • ★【Stone Master】EZARC diamond blade is designed for aggressive cutting on masonry materials such as granite, concrete, nature stone and brick. Whether you are a construction worker, plumber, tile installer, roof worker, paver, DIY enthusiast or work at your home studio, this cutting blade is the perfect for you..
  • ★【Speed-optimized cutting】EZARC has increased the cutting speed of its new Stone-Master Segmented rim diamond saw blade by 30% to meet the current market requirement for speed..
  • ★【Long Service Life】Thanks to premium diamond grit with hardness HRC90+ and special dimensional arrangement, our grinder masonry blade has maximum cutting life. This angle grinder concrete blade guarantees a much longer lifetime for heavy duty cutting demands..
  • ★【Fit Tools】EZARC 4.5" diamond blade is suitable for most tile saws and hand-held angle grinders with a 7/8" Arbor. Disc Size:4-1/2 Inch.
  • ★【Reliable Safety】This 4 1/2 diamond blade for angle grinder is manufactured with high strength alloy steel and prime diamond matrix, which ensure spark-free cutting without burning marks on hard materials. Universal for dry or wet cutting..
Check Stock

Ii.2 Red Gear Grommets

  • 5-3/4" Taurus II.2 and 3.0 Replacement Diamond Coated Ring Saw Blade GRIT 80.
  • This 5-3/4" blade is the same size as the Standard blade.
  • Great for agressive cuts and blade is Omni-directional.
  • Seamless, stainless steel diamond coated replacement blade.
Check Stock

GRAFF 6 Inch Diamond Blade for Angle Grinder - Diamond Cutting Wheel for Cutting Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete - Turbo Diamond Saw Blades - 150 mm

  • UNIVERSAL: Diamond blade for angle grinder is designed for domestic use and DIY. GRAFF turbo cutting disc is intended for working with concrete, artificial stone, paving flag and kerb..
  • INCREASED OPERATING TIME: Diamond blade for angle grinder is constructed so that during operation it heats up more slowly which leads to an increase in operating time..
  • DURABLE: Diamond angle grinder blade GRAFF can self-sharpen by erasing diamond grits during operation. For sharpening it is needed to make two or three cuts on silicon or abrasive stone..
  • HIGH SOLIDITY: Diamond blade for ceramic and tile is designed for precise cutting using small-sized angle grinders with 22.23 mm Arbor. This saw blade has a frame made of improved steel which ensures high solidity during operation..
  • SPECIFICATIONS: Diameter: 6 Inch (150 mm), Arbor: 7/8 Inch (22.23 mm) with 5/8 Inch (15.88 mm) adapter, Kerf: 0.098 Inch (2.5 mm), Segment height: 0.394 Inch (10 mm). Diamond concrete saw blade has a tough body with 0.055 Inch (1.4 mm) thickness..
Check Stock

GRAFF 4 Inch Diamond Blade for Angle Grinder - Diamond Cutting Wheel for Cutting Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete - Turbo Diamond Saw Blades - 105 mm

  • UNIVERSAL: Diamond blade for angle grinder is designed for domestic use and DIY. GRAFF turbo cutting disc is intended for working with concrete, artificial stone, paving flag and kerb..
  • INCREASED OPERATING TIME: Diamond blade for angle grinder is constructed so that during operation it heats up more slowly which leads to an increase in operating time..
  • DURABLE: Diamond angle grinder blade GRAFF can self-sharpen by erasing diamond grits during operation. For sharpening it is needed to make two or three cuts on silicon or abrasive stone..
  • HIGH SOLIDITY: Diamond blade for ceramic and tile is designed for precise cutting using small-sized angle grinders with 22.23 mm Arbor. This saw blade has a frame made of improved steel which ensures high solidity during operation..
  • SPECIFICATIONS: Diameter: 4 Inch (105 mm), Arbor: 7/8 Inch (22.23 mm) with 5/8 Inch (15.88 mm) adapter, Kerf: 0.091 Inch (2.3 mm), Segment height: 0.394 Inch (10 mm). Diamond concrete saw blade has a tough body with 0.047 Inch (1.2 mm) thickness..
Check Stock

GRAFF 4 ½ Inch Diamond Blade for Angle Grinder - Diamond Cutting Wheel for Cutting Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete - Turbo Diamond Saw Blades - 115 mm

  • UNIVERSAL: Diamond blade for angle grinder is designed for domestic use and DIY. GRAFF turbo cutting disc is intended for working with concrete, artificial stone, paving flag and kerb..
  • INCREASED OPERATING TIME: Diamond blade for angle grinder is constructed so that during operation it heats up more slowly which leads to an increase in operating time..
  • DURABLE: Diamond angle grinder blade GRAFF can self-sharpen by erasing diamond grits during operation. For sharpening it is needed to make two or three cuts on silicon or abrasive stone..
  • HIGH SOLIDITY: Diamond blade for ceramic and tile is designed for precise cutting using small-sized angle grinders with 22.23 mm Arbor. This saw blade has a frame made of improved steel which ensures high solidity during operation..
  • SPECIFICATIONS: Diameter: 4 ½ Inch (115 mm), Arbor: 7/8 Inch (22.23 mm) with 5/8 Inch (15.88 mm) adapter, Kerf: 0.098 Inch (2.5 mm), Segment height: 0.394 Inch (10 mm). Diamond concrete saw blade has a tough body with 0.047 Inch (1.2 mm) thickness..
Check Stock

4.5Inch Super Thin Diamond Tile Blade for Cutting Porcelain Tiles Marbles…

  • Super thin turbo mesh rim diamond blade provide fast, precise, smooth and chip-free cutting experience for you..
  • Thicker center to avoid vibrations and wobbling. High Performance diamond matrix provides long life and enhanced material removal..
  • Diamond blade can be used as porcelain tile blade, ceramia tile blade, granite blade and other thin masonry blade..
Check Stock