Reviews Dht Esp8266

Dorhea 4Pcs ESP8266 ESP-12F WiFi Serial Module Microcontroller 802.11N Development Board Wireless Transceiver Remote Port Network Module for NodeMCU MicroPython

The ESP-12F module combines the ESP8266 microcontroller with 4MB of flash and a PCB antenna, with 16-bit Lite mode, clocked at Supports 80 MHz and 160 MHz, supports RTOS, and integrates Wi-Fi MAC/BB/RF/PA/LNA..
The ESP-12F WiFi module supports the standard IEEE802.11 b/g/n protocol, a complete TCP/IP protocol stack. Users can use this module to add networking capabilities to existing devices or to build separate network controllers..
The default firmware can add WIFI capability to another microcontroller, but it really shines when loaded with MicroPython, or NodeMCU..
The ESP-12F is an improved version of the 12E, improve the peripheral circuit, the four laminates plate process, enhanced impedance matching, signal output is better, It is pin compatible with enhanced stability and a better antenna..
Not recommended for users who are new to the ESP8266. New users should instead look at development boards with integrated USB..

What will you get: there are 5 pieces OLED display module with blue display color, self-illuminated and no need backlight.
Power-saving display: the I2c oled display performs better than the traditional LCD display and with lower consumption sicne the IIC (I2C communications) simplifies connections.
Please note that these I2C OLED display module comes without pin headers.
More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
Good compatibility: this i2c oled display module is compatitable with Raspberry Pi 4B/3B+/3B/2B/Zero, compatitable with Arduino, also compatitable for ESP8266, ESP32, STM32, etc..
Product manual: as shown in the instructions.

What will you get: there are 5 pieces OLED display module with classic display color, self-illuminated and no need backlight.
Power-saving display: the I2C oled display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications) simplifies connections.
Please note that these I2C OLED display module comes without pin headers.
More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
Good compatibility: this i2c oled display module is compatible with Raspberry Pi 4B/3B+/3B/2B/Zero, compatible with Arduino, also compatible with ESP8266, ESP32, STM32, etc..
Product manual: as shown in the instructions.

ESP8266 is a highly integrated chip designed for the needs of a new connected world.It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor..
The controllers are easy to program by using the CP2102-USB interface without having to press the flash and reset buttons before each flash operation..
It is an integrated unit with all available resources on board. It's very easy for Arduino projects or any development board with I / O pins. Modern Internet development tools can use the built-in API to instantly put your idea on the fast track..
ESP8266 NodeMcu board has powerful on-board processing and storage capabilities, allows to be integrated with sensors and other specific applicated devices through its GPIOs..
Perfectly compatible with the motherbord IDE/Mongoose IoT/Micropython. This ESP8266NodeMcu development board can be use for small temperature and humidity monitorin home automation project and works very well with the motherbord development platform.

...watch can not only disconnect wifi but also perform bad usb attack.
With an external 3dB antenna it could search more signal than V3, also the larger antenna to the SMA connector can be added.
Refer to our Deauther Watch V3 to understand more what is deauther.
[Same Old - WiFi Test Tool] Installed with the latest ESP8266 Deauther software, the deauther watch V4 can perform different secure tests for your WiFi networks, equipped with 3dB antenna. Moreover it can be used to develop your own software, it is indeed a ESP8266 development board, easy to operate. NOTE: ESP8266 supports 2.4GHz only.
[Extensible - 2 in 1] Added atmega32u4 to this watch, the V4 watch can now be a Bad USB watch and deauther one at the same watch, which is more powerful and capable than the former version DSTIKE deauther watches.
There are empty solder pads at the back of this watch which can be soldered to connect ESP8266 with atmega32u4. For example if you solder IIC pads this watch could become a wifi duck.
[Added Atmega32u4 - Bad USB] Flashed Arduino Leonardo bootloader already, the D&B watch can be programmed as bad usb directly. Two buttons(Digital pin 9 and 10) could be used to execute different commands. Moreover, a demo program has been flashed as well. Therefore when bad ....

Standard pin interface to achieve full compatibility with the pitch Arduino Uno, Mega and so on. (Unless the standard size arduino, such as Nano, Mini).
3.3V power supply using advanced chip (with the official expansion board power chip CC3000 same), so 3.3V Arduino board provided more accurate, so ESP8266 as official cc3000 chip work as normal, there is no gap..
It leads to a WiFi module power supply / service interface to facilitate developers to extend the power supply and maintenance..
Onboard ESP8266-12 stable industrial grade serial WiFi module, using an enhanced PCB antenna, signal better..

Module is nestled in at the end of this Feather contains a dual-core ESP32 chip.
ESP32 has way more GPIO than the ESP8266.
Recommended for makers who have some experience with microcontroller programming..

ESP32 Mini development board, everything needed to program the ESP32 module, ESP32/32S WIFI Development Bluetooth ESP8266 Module CP2104 for Arduino IDE..