Reviews Dewalt 1volt Drill Driver Combo

BeHappy Cordless Drill Combo Kit 21V, 1/2 Inch Brushless Power Tool Kit and 1/4 Inch Impact Driver, Electric Drill Kit with 2 Batteries and Charger, DIY

  • 1/2 Inch Drill Driver: The drill driver with a max 21V can provide 1000in-lb (110Nm) torque, and the 19+1-position clutch has two modes for you to choose from. At the same time, it has 2-speed transmissions (0-500RPM/0-2000RPM), thus avoiding overdriving screws. The cordless drill set can handle most drilling and driving tasks.
  • 1/4 Inch Impact Driver: The impact driver can generate up to 2600 in-lb（300Nm） torque, while the variable speed switch provides 0-2600RPM and 0-3300IPM, which can handle most fastening tasks, ideal for repairing work, furniture assembling, and other DIY hand working.
  • The direction-of-rotation selector located above the trigger switch allows you to change the direction of bit rotation.
  • Brushless Design: The brushless drill combo kit is different from the traditional brushed drill, eliminating the need for the conductive carbon brush of the traditional brushed motor, no maintenance, the failure rate will be lower in comparison, and the operating time and voltage will be more stable. The power drill combo kit will also have a longer service life, with less interference with radio equipment and less noise.
  • Ergonomic Design and LED Lights: The non-slip handle of the power tool combo kits is made of soft rubber, which is ergon....
Check Stock

DEWALT 20V MAX* Cordless Drill Combo Kit , 6-Tool (DCK661D1M1)

  • DCD771 Drill/Driver in the cordless drill combo kit is compact (front to back) and lightweight, designed to fit into tight areas.
  • DCD771 Cordless Drill/Driver in the cordless tools combo kit has a high-performance motor that delivers 300 unit watts out (UWO) of power for completing a wide range of applications.
  • DCS885 Cordless Impact Driver of the drill/impact driver combo kit has a compact design (5.55-inch front to back) to fit into tight areas.
  • DCS381 Cordless Reciprocating Saw with keyless blade clamp allows for quick blade changes without touching the blade or reciprocating shaft..
  • DCS393 Cordless Circular Saw with 6-1/2-inch carbide blade can cut 2x4s at a 45-degree angle in a single pass.
  • DCG412 Cordless Grinder provides high-power for cutting and grinding applications up to 8,000 rpm.
  • DCS356 Cordless Oscillating Multi-Tool 3-speed selector allows users to choose their speed setting based on application.
Check Stock

2997-27 M18 18-Volt Lithium-Ion Brushless Cordless Combo Kit (7-Tool) W/ (2) 5.0 Ah Batteries, (1) Charger, (2) Tool Bags

  • DCD771 Drill/Driver in the cordless drill combo kit is compact (front to back) and lightweight, designed to fit into tight areas.
  • DCD771 Cordless Drill/Driver in the cordless tools combo kit has a high-performance motor that delivers 300 unit watts out (UWO) of power for completing a wide range of applications.
  • DCS885 Cordless Impact Driver of the drill/impact driver combo kit has a compact design (5.55-inch front to back) to fit into tight areas.
  • DCS381 Cordless Reciprocating Saw with keyless blade clamp allows for quick blade changes without touching the blade or reciprocating shaft..
  • DCS393 Cordless Circular Saw with 6-1/2-inch carbide blade can cut 2x4s at a 45-degree angle in a single pass.
Check Stock

Milwaukee 2695-15 M18 Combo 15 tool Kit W/4 Xc Bat

  • 1/2-Inch Drill/Driver In The Cordless Drill Combo Kit Features 283 Units Watts Out, Two Speed Gear Box (0-350/0-1,500), Compact Design (8.25-Inch Long/3.5 Lbs), 1/2-Inch Chuck, Built In Led Light.
  • 1/4-Inch Hex Impact Driver Of The Cordless Tools Combo Kit Provides 1,450 In-Lbs Torque At 2,900 Max Rpm'S And 3,000 Bpm And Is Equipped With A Quick Release Chuck.
  • Circular Saw Features High-Performance Motor (3,700 Rpm'S) Of The Drill/Impact Driver Combo Kit, 5-1/2-Inch 18 Tooth Carbide Blade ( 2-1/8' Cutting Capacity) And Beveling Shoe (50 Degrees).
  • Reciprocating Saw Features High Performance Drivetrain (7/8-Inch Stroke Length And 3,000 Spm), Tool Free Blade Release, Variable-Speed.
Check Stock

Milwaukee M18 Cordless LITHIUM-ION 6-Tool Combo Kit (2696-26)

  • 1/2-Inch Drill/Driver In The Cordless Drill Combo Kit Features 283 Units Watts Out, Two Speed Gear Box (0-350/0-1,500), Compact Design (8.25-Inch Long/3.5 Lbs), 1/2-Inch Chuck, Built In Led Light.
  • 1/4-Inch Hex Impact Driver Of The Cordless Tools Combo Kit Provides 1,450 In-Lbs Torque At 2,900 Max Rpm'S And 3,000 Bpm And Is Equipped With A Quick Release Chuck.
  • Circular Saw Features High-Performance Motor (3,700 Rpm'S) Of The Drill/Impact Driver Combo Kit, 5-1/2-Inch 18 Tooth Carbide Blade ( 2-1/8' Cutting Capacity) And Beveling Shoe (50 Degrees).
  • Reciprocating Saw Features High Performance Drivetrain (7/8-Inch Stroke Length And 3,000 Spm), Tool Free Blade Release, Variable-Speed.
Check Stock

Hardwerks Universal Fit Magnetic Bit Holder, Securely Mounts to Belt Clip Screw, Fits Both Left and Right Side of Driver, for Milwaukee, DeWalt, Makita, Ridgid, Bosch, Ryobi, More (2 Pack, Standard)

  • Don’t get stuck up a ladder without the bit you need! Five storage locations allow you to keep your most used ¼" hex bits on your drill or driver so you always have what you need when you need it. Includes 2 bit holders and mounting screws for all brands. Fits Milwaukee M18, Dewalt, Bosch, Ryobi, Ridgid and Makita drills and drivers. See pictures for specific fitments..
  • Don’t let your bit holder get in your way or stop you from using your belt hook! The Hardwerks bit holder mounts on either the left or right side of your impact driver or drill. Bit holders that only mount on the right side of your tool get in the way when you are grabbing your driver and make bit changes harder. The Hardwerks bit holder works with Milwaukee and Dewalt belt clips as well as available universal belt clips for other brands..
  • Tired of dropping screws, holding them in your mouth or fishing for them in your pocket? Stick your screws securely to the magnet on the side of the holder and easily retrieve them when needed. Need to pre-drill or counter sink a hole? Stick the drill bit to the side magnet and take it with you..
  • Your bit holder won’t rotate, loosen or fall off! Hardwerks bit holder is screwed securely to your drill or driver. Bit holders attached with adhe....
Check Stock

Bosch 18V 2-Tool Combo Kit with 1/2 In. Compact Drill/Driver and 1/4 In. Hex Impact Driver GXL18V-26B22

  • COMBO KIT: The Bosch GXL18V-26B22 is a reliable compact combo kit that includes two 18V tools (impact driver and drill/driver) designed to fit in tight areas and to provide Pro performance, along with two 2.0 Ah 18V batteries and a charger.
  • EFFICIENT: Featuring an efficient impact driver hammer-and-anvil system, the combo kit delivers Pro performance, with 1, 400 in.-Lbs. of max. torque in a lightweight tool that weighs just 2.4 lbs.
  • LIGHTWEIGHT: The included drill features a light but powerful drill motor that provides outstanding drilling production in a tool that weighs just 2.8 lbs..
  • VARIABLE SPEED: Featuring a variable-speed drill that furnishes control for high-speed (0-1, 700 no-load RPM) and high-power (0-450 no-load RPM)..
  • POWER: With a robust impact driver motor, the Bosch GXL18V-26B22 delivers a max. Of 3, 600 BPM for professional power..
Check Stock

DEWALT 20V MAX Power Tool Combo Kit, 4-Tool Cordless Power Tool Set with 2 Batteries and Charger (DCK444C2)

  • DCD771 Drill/Driver in the cordless drill combo kit is compact (front to back) and lightweight, designed to fit into tight areas.
  • DCF885 Impact driver in the cordless tools combo kit offers 1-handed loading for its 1/4-inch hex chuck and accepts 1-inch bit tips.
  • DCS355 Oscillating tool in the drill/ impact driver combo kit offers a Quick-Change accessory system that allows blades and attachments to be changed quickly without wrenches..
  • DCL040 LED Light helps illuminate your work area with an output of 110 lumens..
Check Stock

DEWALT 20V Max XR Cordless Drill Combo Kit, Brushless, 2-Tool (DCK283D2)

  • Brushless motor of cordless drill combo kit delivers up to 57% more runtime over brushed.
  • XR Lithium Ion batteries with fuel gauge in cordless tools combo kit provide 33% more capacity over standard packs.
  • DCD791 20V max 1/2-inch Drill/Driver in the drill/ impact driver combo kit has a compact (6.9-inch front to back) and lightweight (3.4 lbs.) design to fit into tight areas.
  • DCF887 20V max 1/4-inch Impact Driver has a compact (5.3-inch front to back) design to fit into tight areas.
  • DCD791 features a 3-mode LED with 20-minute trigger release delay in Spotlight Mode, providing increased visibility in dark or confined spaces.
  • DCF887 features 3 LEDs imbedded in front of tool with 20-second trigger release delay providing increased visibility in dark or confined spaces.
Check Stock