Reviews Desoldering Station

Helping Hands Soldering, NAKOOS Third Hand Soldering Tool PCB Holder Station with 4 Flexible Metal Arms Solder Iron Stand Heavy Duty Steel Base for Jewelry Crafts Repair Hobby

  • ... adjustment extra rubber cover for PCB. Locks in place with knurled thumb nuts..
  • 【Detachable Soldering Iron Stand】There is an additional metal soldering iron stand contained in the pack, solving the issue where to place the soldering pen after using. The stand is detachable and easy to install. Suitable for desoldering work..
  • 【Widely Use & Service】 This solder station is easy and simple to set up, could be widely used in soldering, desoldering, electronic repair, crafting, modeling. NAKOOS is strict with quality and every product is fully inspected. THREE MONTHS unconditional exchange and return policy is supported..
Check Stock

Aoyue 932 Vacuum Pickup Station

  • This is vacuum pickup station that picks up chip easily after desoldering.
  • Includes a large size 40g, medium size 18g and small size 3g suction heads..
Check Stock

NEWACALOX soldering gun with soldering iron tips set

  • Soldering Gun Kit, One hands Holding Solder Desoldering Guns Set for Circuit Board Repair DIY 50W 110V.
  • 16pcs Lead-free Soldering Iron Tips Welding Tips for HAKKO 936,937,907 Atten, Quick, Aoyue, Yihua,Vastar,Sywon,Tabiger,SOAIY and X-Tronic solder iron/Soldering Station.
Check Stock

MOGAOPI Solder Wick and Desoldering Pump, Spare nozzle, Solder Sucker & Desoldering Wick,1pcs Solder Braid Desoldering Vacuum Pump Solder Remover Tool

  • ( 4-in-1 Solder Removal Tool ) 1pcs desoldering vacuum pumps ,1pcs Spare nozzle ,1pcs solder wicks and 1pcs High Temperature Resistance Silicone Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
  • ( One-handed solder sucker with powerful suction ) you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • ( Desoldering Wick with copper braid ) 1pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
  • ( ABS body with non-slip sponge and Nylon nozzle desoldering pump ) The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat....
Check Stock

Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover

  • 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
  • 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time..
  • 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while....
Check Stock

VPABES 938D Portable Hot Tweezers Mini Soldering Station US Plug for BGA SMD Repairing Tool

  • 【Digital LED Display】 The product adopt microcomputer control,The hot air and soldering iron all are digital LED display the temperature..
  • 【Rework & Soldering】 2 in 1 SMD Hot Air Rework Station and Soldering Iron..
  • 【Solder Station Features】 High power,quick warming-up,Temperature stabilization and is impervious to air,,and long life and low noise. it have inductance in the hadle,it will be quickly to work when you take the handle,when the handle is return to the shelf,the machine will automatic stopage..
  • 【Widely Used】 Designed for soldering or de-soldering SOIC, CHIP, QFP, PLCC, BGA and other temperature sensitive components, essential tool for cell phone repair, laptop repair, or circuit boards soldering..
  • 【20-in-1 Full Kit】 The packing include: 1 * 898D 110V Solder station, 12 * Solder iron tips, 1 * 6in1 BGA tools, 1 * Desoldering pump, 1 * 100g solder wire, 2 * Tweezers, 1 * Soldering iron heater, 1 * Hot air gun heater, 1 * IC puller..
Check Stock

YIHUA 929D-V Electric Desoldering Iron Solder Sucker Desoldering Pump with Shorter Charging Handle and Desoldering Nozzles 1.0mm 1.2mm for Through-Hole Desoldering

  • This 929D-V desoldering iron integrates soldering iron and desoldering pump, you can enjoy the single-handed and continuous desoldering with its short charging handle to rid the hassle of changing grip positions. If you are looking to purchase a desoldering tool that can handle the desoldering jobs of through-hole components and removing excess solder (solder bridges) without jamming up, this is a great choice..
  • This is a plug-n-play desoldering iron. Plug in the power plug, allow the desoldering iron to preheat for approximately 3 minutes, and you are ready to go. YIHUA exclusive heating system combined with a strong desoldering pump ensures you experience uninterrupted desoldering..
  • Different from the traditional use-and-throw desoldering irons, the 929D-V can be used, easily cleaned, and reused. You can lift and pull out the scrap solder storage tube and clean the solder out like a breeze. Meanwhile, we also included 2 different and interchangeable diameters (φ1.0mm & φ1.2mm) desoldering nozzles for different sizes of through-hole components. NOTE: change the nozzle after the desoldering iron has cooled completely..
  • This desoldering iron comes with a heat deflector at the end of the heating element, and this prevents the excess heat from transferri....
Check Stock

SUGON 8610DX Hot Air Rework Station 110V Soldering Heat Gun 3 Storage Channel 212°F-932°F (C/F) Sleep Function Quickly Replace the High Temperature Nozzle Bracket LED 1000W High Power ESD

  • 8610DX SMD hot air rework station quickly heats up to the specified temperature within 5 seconds, as shown in the video..
  • Soldering rework station hot air with quick-change nozzle bracket，quickly replace the nozzle without waiting for the temperature to drop, as shown in the video..
  • Put down the handle and automatically enter the dormant state, prolonging the service life of hot air soldering..
  • Hot air desoldering station with LED digital display, 4 temperature memory storage function, dual temperature display, temperature calibration, switching between °F and °C, up to 932°F..
  • Hot air rework soldering station has passed FCC, CE, RoHS certification，we provide the best service for each customer, if you have any questions about our products, please feel free to contact us..
Check Stock

Mogaopi Desoldering Wick, Desoldering Pump, Solder Sucker, Solder Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length) Solder Wire, Replacement Tip, Desoldering Vacuum Pump Solder Removal Tool

  • 【6-in-1 Solder Removal Tool】: 2 pcs Desoldering Wire, 1pcs Solder Wire, 1pcs Desoldering Pump, 1pcs Replacement Tip, 1pcs Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
  • Desoldering Wick with Copper Braid - Solder wire, replacement tip, 2pcs solder braid (3.5mm/2.0mm Width, 1.5m Length). 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder..
  • 【One-handed solder sucker with powerful suction】: Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • ABS Body with Non-slip Sponge and Nylon Nozzle Solder Wick - The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold. Right or Left handed design allows easy one-handed use..
Check Stock