Reviews Desk Cup Holder Clamp

Drive Medical Universal Clamp-On Cup Holder For Walker Rollator & Wheelchair 3 x 3 Inch Black

  • Wheelchair & Walker Cup Holder: Designed to keep drinks within easy reach, this cup holder for wheelchair can also be attached to wheeled walkers, rollators, and transport chairs.
  • Premium Features: New-and-improved clamp design allows the cup holder to swivel in order to keep contents level.
  • Quality Construction: The ultimate wheelchair and walker accessories, our universal cup holders are constructed of durable, lightweight plastic.
  • Universal Fit: Special clamp insert can be added or removed as necessary to accommodate different tubing and accommodates tubing from 0.63” to 1” in diameter.
Check Stock

Evenflo Stroller Accessories Starter Kit

  • Universal fit: All items fit on most single strollers.
  • Stroller Netting: Defends against bees, bugs, mosquitos and flying insects. Elastic edges make assembly easy, and ultra-fine mesh allows fresh air flow..
  • Weather Shield: Protects your child from rain, wind and other outdoor elements. Mesh side panels provide air-flow and easy in/out zippers on the front mean you don't have to remove the shield for your child to get out of the stroller..
  • Cup Holder: Universal easy-to-use clamp on the cup holder allows you to use it on strollers, beach chairs, shopping carts and more Dish-washer safe cup holder detaches from clamp for easy cleaning..
  • Organizer: 5 total storage pockets, including a secret zippered pouch for valuables..
Check Stock

Accmor Universal Stroller Cup Phone Holder and Luggage Cup Holder Bundle Set, Cup Holder for Stroller Bike Walker,Gifts for Travelers Flight Attendants

  • Our stroller cup holder with phone holder fits for most strollers, walker, wheelchair, bike, scooter, boat handle bar, shopping cart, kayak, ATV, lawnmowers, motorcycle, treadmill etc..
  • This 2-in-1 stroller cup holder with a phone holder, it can load drink bottles and cell phones at the same time. You can see new messages, incoming calls in the first time when you are pushing a stroller or running on a treadmill. It is applicable to most mobile phones on the market..
  • The clamp designed with rubber pad, it helps lock the cup holder onto the bar without movement. The clamp can also rotate 360 degrees, and it is adjustable to fit different size rods which diameter is 0.55 in-1.7 in / 1.4 cm-4.5 cm..
  • 2 Size in One: Our luggage bottle holder bag is designed in two sizes. The large one can be used to hold medium and large size coffee cups, juice cups, drinks bottles, your thermos, yeti cups, etc. The small one can hold small cups and bottles like your child's learning cup, pop-top cans, small kettle etc..
  • Easy to Use: Just insert the luggage cup holder into the luggage lever and stick the velcro on the inside. The beverage holder side can be placed in the front or back of the luggage. The suitcase cup holder is made of high-quality Oxford cloth, wear-resistant....
Check Stock

LMAVAG Motorcycle Cup Holder Handbar Bike Cup Holder,Universal Bike Water Bottle Holder Clamp on ATV Cup Holder Kayak Drink Holder for Scooter,Automotive,Boat,Golf Cart,Scooter,Lawn Mower,Tractor

  • Wide Application: The Handbar Cup Holder comes with extra self reinforced straps(in two side) to fix the handhar when necessary which is wide to use for Bike,Motorcyle,ATV/UTV,Kayak,Golf Cart,Scooter, Wheelr Chair, Walker, Boat,Lawn Mower,Beach Chair, Tractor,Shopping Cart ect..
  • Durable Adjustable Clamp: The bike cup holder with bionic alligator clamp,which is durable to bite the round handbar,the clamp with little steel plat to keep firm,and could adjust the clamp in 360 degree to fit the bar..
  • Thermal Insulation to keep: The inner of Bar cup holder is thermal insulation layer to keep your bottle warm or cold..
  • Anti-Scratch Handbar & Bottle:The Inner of the cupholder with protective strap to keep the bottle well,will not get the bottle scratched, and the clamp come with a foam adhesive to protect the handlebar get scratched..
  • Extra Features: The inner diamter of the cupholder is 3.26in(8.3cm), the high of holder is 5.3inch. Ether features.
  • 1. With adjustble drawstring to hold the bottle firmly.
  • 2. With two little mesh pocket to hold some little thing,like keys,cars,tools ect.
  • 4. Waterproof fabric to keep the bottle well..
Check Stock

eSamcore iPad Holder for Car, Dashboard Tablet Holder for Car Suction Cup Tablet Car Mount with Large Clamp for All 6"-11" Apple iPad Samsung Galaxy Tab Tablet

  • Powerful Tablet Clamp: Thicker and tighter clamp of car ipad holder can provide a greater grip to hold all 6" to 11" diagonal tablets（The maximum opening distance of the clamps is 9 inch). Extended side arms with soft rubber pads make eSamcore ipad car mount suitable for tablet with normal protective case（Thickness below 17mm). Anti-slip silicone pad of clamp prevents iPad slipping from car tablet holder when driving on the bumpy road..
  • Wide Compatibility: This eSamcore tablet holder for car dashboard is compatible with all 6" - 11" devices, such as iPad Pro 9.7/10.5/11, iPad Air 9.7/10.5/10.9, iPad, iPad Mini 2/3/4. All Samsung Galaxy Tab, Android tablet, large screen cell phone such as folding Phone, z fold 3, iPhone 13, iPhone 12, Galaxy S21/S21 Plus/S21 Ultra, Galaxy Note 20/20 Ultra S20/S20 Plus/S20 Ultra, iPhone 11 Pro Max, iPhone Xs Max, iPhone 12 Pro Max..
  • Unobstructed View iPad Car Holder: With upgraded downward extending mount arm, eSamcore dashboard iPad holder for car will not block your view of the road. You can adjust the tablet car mount arm up and down in 140° through the security lock to fit your dashboard. With 360°rotating ball joint, eSamcore iPad mount for car can also be switched between portrait and landscape view..
Check Stock

kemimoto Motorcycle Cup Holder, Oxford Fabric Motorcycle Drink Holder with 0.6\-1.75\ Alligator Clamp, Universal Water Bottle Holder for Motorcycle, ATV/UTV, Scooter, Boat, Kayak, Bike, Walker

  • 【Upgraded Alligator Clamp】Compared with the old style, kemimoto motorcycle cup holder has upgraded the 90°adjustable alligator clamp increased from 1 screw to 2 screws, and add a cross-mounting hole design, which is more sturdy, better load-bearing, and will not loosen or spin. Get rid of the trouble of falling off and loosening when riding at high speed and spinning when holding large-capacity water bottles..
  • 【Easy to Install on 0.6"-1.75" Pole】The alligator clamp of this kayak cup holder fits 0.6"-1.75" diameter handlebars/pole, please confirm the diameter of your handlebar/pole before purchasing. And it is easy to install and remove with a hand screw design..
  • 【24oz Max Load Capacity】The maximum cup capacity can reach 24oz, please note that the bottom diameter of the scooter cup holder is 3.94 in. With a drain at the bottom of cup holder to keep the water out..
  • 【With Tightening Drawstring】The adjustable top drawstring is reinforced and tight. You can cinch down on the top to hold the drink firm if the going gets bumpy keeping it from flopping around along your ride..
  • 【Durable Fabric with 2 Separated Mesh Pockets】Be Made of 600D oxford fabric instead of other stainless steel or plastic holder, durable and washable. Don’t worry abo....
Check Stock

Accmor Universal Cup Holder, Stroller Cup Holder with Phone Holder, Bike Cup Holder with Phone Mount, Large Caliber Designed Cup Holder, 360 Degrees Universal Rotation Drink Holder

  • Accmor universal cup holder with phone organizer fits for most stroller , walker , wheelchair, bicycle, scooter, boat handle bar ,shopping cart, kayak, ATV, lawnmowers, motorcycle , treadmill etc..
  • The cup holder is made with 360 degree adjustable phone mount, it can load drink bottles and mobile phones at the same time. The phone mount will securely mount your device to handlebars using an adjustable clip and silicone net. Silicone net doesn't crack or break in extreme weather conditions and can safely stretch up to hold any 3.5"*6.8" smart phones. Tips: The elastic rope of the phone holder can be adjusted !.
  • The clamp designed with rubber pad, it helps lock the cup holder onto the bar without movement. The clamp can also rotate 360 degrees, and it is adjustable to fit different size rods which diameter is 0.55-1.7 in / 1.4 cm- 4.5 cm..
  • Cup holder is adjustable and suitable for all the bottles, whose diameter less than 95mm. The width of the cup holder clip can freely adjust, so the holder can be installed on different styles of strollers..
  • The cup holder is made of safe and environmentally friendly materials. The ABS plastics and slip resistant rubber ensure the bottle keep steady even on the rough road. Lightweight and simple to install, you can get i....
Check Stock

Victor DC240B High Rise Collection Adjustable Laptop Stand/Platform with Storage Cup, Air Hydraulic Lever Easily Raises and Lowers The Platform, Black

  • SIMPLE: Place the High Rise Adjustable Stand Up Desk Converter on top of your existing desk, adjust the height, and you are ready to work standing up..
  • GAS STRUT: Easily raise or lower the desk surface with the gas strut design. Note: This product does not lower to the sitting position and is designed only for standing..
  • LARGE WORK SURFACE AND CUP HOLDER: Easily place your keyboard, mouse, phone, coffee and accessories all on one surface.
  • ROTATING WORK SURFACE: Work surface rotates to promote more movement, but can be locked with included clamp if no movement is preferred.
  • TAPERED REAR: The rear portion of the desk is tapered to fit corner cubicles and notched to help manage cables. Note: Product is not for sitting..
Check Stock

kemimoto Motorcycle Cup Holder, Oxford Fabric Drink Cup Can Holder with Drain and Alligator Clamp, Bar Cup Holder for Motorcycle, ATV, Scooter, Marine Boat, Kayak, Bike, Wheelchair, Walker, Golf Cart

  • 【Upgraded Alligator Clamp】Compared with the old style, kemimoto motorcycle cup holder has upgraded the 90°adjustable alligator clamp increased from 1 screw to 2 screws, and add a cross-mounting hole design, which is more sturdy, better load-bearing, and will not loosen or spin. Get rid of the trouble of falling off and loosening when riding at high speed and spinning when holding large-capacity water bottles..
  • 【Easy to Install on 0.6″-1.75″ Pole】The alligator clamp of this kayak cup holder fits 0.6″-1.75″ diameter handlebars/pole, please confirm the diameter of your handlebar/pole before purchasing. And it is easy to install and remove with a hand screw design..
  • 【26oz Max Load Capacity】The maximum cup capacity can reach 26oz, please note that the bottom diameter of the scooter cup holder is 4.3 in. With a drain at the bottom of cup holder to keep the water out..
  • 【With Tightening Drawstring】The adjustable top drawstring is reinforced and tight. You can cinch down on the top to hold the drink firm if the going gets bumpy keeping it from flopping around along your ride..
  • 【Durable Fabric with 2 Separated Mesh Pockets】Be Made of 600D oxford fabric instead of other stainless steel or plastic holder, durable and washable. Don’t wo....
Check Stock