Reviews Deals On Table Saws

WYNNsky 80mm Digital Height Gauge Magnetic Mini Height Gauge Depth Gauge for Saw Table Thickness Gauge with Magnetic Self Standing for Woodworking Home Decoration

  • Application: Mini digital height gauge suitable for measuring holes, grooves, manual router table saws. Large digital display for quick reading, easily change mm/inch, relative and absolute values. Made of tough plastic, durable for woodworking, construction, home decoration, table saws, routers, etc..
  • Feature: Featuring a measuring rule with locking screw, this mini digital height gauge provides measurements in mm/inch with read-out accuracy to 0.1mm. The unit of measurement is easily changed via the touch of a button, and digital readings are displayed on the large, simple-to read LCD screen..
  • Magnet Base: The gauge can be set to zero at any point along the slide scale. It’s capable of measuring both vertically because of its flat back and magnetic base horizontally too..
  • Measuring Range: This gauge possesses a 0-80mm measuring range and hole depth measuring 50mm, with a 60mm wide aperture. To extend the range, simply attach the extension probe. Connect the probe to the other end and it becomes a depth scale..
  • There are plenty of uses for this economically-priced digital gauge. It’s self-standing for setting the cutter depth on router tables and saws tables, as well as being low-profiles enough for adjusting the fence position on band saws. Other f....
Check Stock

MASTEC 8 Inch 64 Tooth Circular Saw Blade Anti Kickback Tooth for Wood Cutting with 5/8-Inch Arbor

  • 【Application】:Fast smooth clean cutting and widely used in Miter Saws, Circular Saws, Table Saws, Hand Saws and Chop Saws..
  • 【ATB Tooth】:Alternate Top Bevel Teeth blade ideal for cutting all kinds of wood.Such as Hard Wood,Soft Wood,Plywood,Chipboard..
  • 【Anti-Kickback Shoulder】:For safety reasons,preventing inversion of saw blade during cutting..
  • 【Specification】:8 inch 64T fine finishing wood cutting blade with a 5/8 inch arbor..
  • 【Good Service】:Please contact us if you have any questions about this saw blade.We guarantee the 100% replacement.Any problems will be solved within 24 hours..
Check Stock

DWE7402DI Dado Throat Plate, Table Saw Parts Insert Accessories Replacement for 10-Inch Portable Table Saw DEWALT DWE7490, DWE7491 Versiones

  • ❤ [A good helper for table saws] If you have a table saw and need to cut at any angle, then you will know the value of a miter gauge. You may also know that the miter gauge that comes with the saw is not very accurate or durable. Not to mention the fit in the miter groove may not be so good. And our high-quality miter gauges can meet your table saw cross-cutting needs..
  • ❤[High-quality material] The guide rod and baffle of the table saw miter gauge are made of all aluminum to ensure its durability and firmness, rust and wear resistance, and the table saw miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
  • ❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
  • ❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen th....
Check Stock

POWERTEC 71143 Deluxe Miter Gauge for Table Saw | Miter Guide with 120 Angle Stops

  • Function: a high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw (band saws and other applications) and then guides the miter gauge parallel to the blade for high precision angled and crosscuts.
  • Features: a lightweight design with a durable laser-cut aluminum construction, Large gauge handle, universal fence mounting bracket pivoting locking mechanism, A removal plate that allows the miter gauge to be used with t-slotted and non t-slotted miter slots, and adjustable Expansion discs that remove all side play from the bar, creating a perfect fit.
  • Precision: angle guide (with 120 total angle stops) in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts.
  • Universal design:suited for most standard miter slots (3/4” width x 3/8” depth) with or without T-slots, making it compatible with popular Brand table saws, band saws, Router tables, disk and belt sanders.
Check Stock

PP Materials Easy to Use Strict Inspections Guaranteed Quality Woodworking Feather Board, Feather(Square feather board B blue)

  • ...board, and you don't need put your hands too close to the saw blade during the woodworking. Not only will Feather-loc protect your hands, it also helps prevent kickback, binding, and bent blades.The professional featherboard will help you keep safe and feel like being a woodworking master when you are using router, table saw and band saw..
  • ✒【 Suit for Dual or Tandem Application】: The woodworking Feather Loc Board can be quickly and easily connected to a miter slot or t-slot, and can be DIY according to your needs.Mounting Hardware Included for nearly any dual or tandem application, comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more..
  • ✒【Two Modes (3/4" + 3/8")】: 4 Miter Bars are suitable for all standard 3/4" and 3/8" T-track.Includes wedge-lock system and T-bolts system that all of them will provide strong fastening.Comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more, this feather loc board is perfect for woodwork..
  • ✒【A Must Have for Woodworking】: This unique featherboard can be quickly and easily installed on a miter slot or t-slot. Easy set-up feature increases the accuracy, quality and safety of the cuts....
Check Stock

Empire Manufacturing TSS-8D The Complete TopSaver System

  • Received "Top Product Award" from wood Magazine 2004.
  • product contains no silicones and have no staining or other ill effects on finishing..
  • Reduces sliding friction and binding on table saws, scroll saws, bandsaws, Jointers, planers and other woodworking metal tool surfaces.
Check Stock

CMT P10024 ITK Plus Ripping Saw Blade, 10 x 24 Teeth, 10° ATB+Shear with 5/8-Inch bore

  • For fast and excellent rip cuts thanks to the shear angle design..
  • Use on radial arm saws, miter saws, table saws for cutting soft and hardwood..
  • 0.094 kerf thickness, 0.063 plate thickness, 20° cutting angle, 10° ATB+Shear grind..
  • Thin kerf reduces material waste, shear angle produces smooth cuts and improves cutting speed..
  • Special Carbide prevents from material failure, Non-Stick Orange Shield protects against corrosion..
Check Stock

Furniture Mod - Furnicraft

  • Featuring a 10-inch diameter (254 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 6000 RPM.
  • Perfect for slicing through both hard and softwoods of all kinds.
  • Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts.
  • Designed with 80 carbide-tipped teeth for ultra-fine finish wood cutting.
  • Compatible with the majority of 10-inch miter saws, jobsite saws, and table saws.
Check Stock

Magswitch Dual Roller Guide Attachment for Magswitch Workholding System

  • -The Magswitch Dual Roller Guide is the ultimate third hand when you are doing the most difficult and dangerous woodworking projects on a bandsaw or general infeed outfeed support on tables and fences..
  • -SUPPORT: The dual roller guide helps support a tall panel or hold down a long piece of wood and steady your resaw projects..
  • -FEATURES: A dual set of roller bearings provide firm yet smooth glide of wood through a saw blade and micro adjustment for fine tuning to 90 degrees..
  • -EASY SET UP: The dual roller's low profile design allows for fast, strong set up anywhere on a steel table or cast iron fence, even on the smallest table..
  • -INCLUDES: Dual roller guide and all required attachment hardware..
  • Features a dual set of roller bearings for firm yet smooth glide of wood through a blade..
  • Includes micro adjustment for fine tuning to 90 degrees..
  • Ideal for re-sawing on band saws, a second hand to hold raised/long or tall panels against a fence on table saws, general in-feed out-feed support on tables or fences..
  • Built from strong and durable ABS UL94VO material for years of use..
Check Stock