Reviews Dc Power System

Dpg-200 Vacuum Transducer with

  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler shift detection in imaging.
Check Stock

RCA RP7887 Super Radio 3

  • High performance Super Radio III - still the best in terms of long-range performance and sensitivity.
  • 2-way speaker system - the built-in 2-Way speaker system is driven by a 6.5" high sensitivity woofer and 2" cone tweeters.
  • Separate bass and treble controls - leaves the control to you by providing separate bass and treble controls.
  • Thumbwheel tuning controls - provides convenient and accurate tuning control.
  • External AM/FM antenna terminals - easily connect your own antenna.
  • A high performance SUPER RADIO III AM/FM radio is still our best long-range performance and selectivity radio 2-Way Speaker System.
  • The built-in 2-Way speaker system is driven by a 6.5" high sensitivity woofer and 2" cone tweeters 2-Way Power with Automatic (AC/DC) Switching.
  • Automatically switches from DC to AC when the unit is plugged in to avoid using battery power.
  • Separate Bass and Treble Controls Leaves the control to you by providing separate bass and treble controls.
Check Stock

Victron Energy Lynx Power in Battery Connector

  • The lynx power in module is used to connect batteries via an external fuse, It can be useful if you have multiple parallel strings.
  • The Power In contains a negative and positive DC bus-bar with M8 bolts in which to connect batteries cables.
  • It can take cables up to 22 mm in diameter through the bottom entry guides, and no limit via the two side connections.
  • A modular DC bus bar, the Victron Lynx Power In is used to connect batteries to the Lynx DC distribution system.
  • Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation.
Check Stock

2 Pieces DC Converter 12V to 5V 3A 15W DC Buck Converter Module, DC to DC Reduced Voltage Regulator Car Power Converter Output Power Adapter (Right Angle Type-C Interface)

  • 12V to 5V USB converter: input voltage: 12V DC.
  • Type-c and high conversion: this DC to DC power converters have right angle type-c charging ports.
  • Featuring an integrated switch thin regulator module, the conversion rate of this DC to DC buck converter is up to 96%.
  • Intelligent protection: 12V to 5V DC converter is using intelligent microprocessing chip, over voltage, over current, over temperature, short circuit, it can be auto protection.
  • Wide application: DC converter module 12V to 5V suitable for GPS navigation, driving recorder, electronic dog, car radio, car audio, MP3/MP4, walkie talkie, surveillance system, bus display, taxi advertising screen, driving recorder, LCD TV, LED, etc..
  • Warm prompt: those devices' power must be lower than 15W when use this DC/DC converter 12V to 5V, and not Compatible with partial Samsung phones.
Check Stock

WZRELB Reliable Design Pure Sine Wave Inverter DC to AC 24VDC input 120VAC Output Off Grid Backup Power Supply Power Converter, (RBP60024B1)

  • ...er + 2 cables with cable lug terminals +manual. Everything you need to complete the installation is included..
  • High quality pure sine wave inverter -- convert DC power from 24V battery to AC power for AC electronic appliances..
  • surge power: 1200W -- a good source of backup power supply for off grid system or emergency like power failure..
  • Reliable performance -- the 600W Power inverter is equipped with extra thick (2. 0mm) PCB which greatly enhances the load capacity..
  • Run your appliance safe and sound -- high frequency transformer of the inverter transfers DC to AC and ensures the stable and full AC output..
  • Perfect sine wave perfects the performance -- big branded mosfets and true copper inductance work together to make perfect pure sine wave AC output and optimize machine performance as much as possible..
  • Monitor power usage with no effort -- LED Display for both DC volt and AC volt which makes the power usage clear for users..
  • Silent cooling system -- intelligent silent fan cools the inverter down automatically without any annoying noise..
  • High voltage input cut off protection, low voltage alarm protection, overload protection, over current protection, surge power protection, reverse connection protection and short circuit protection b....
Check Stock

Dansko Women’s Patti Navy Clog 7.5-8 M US

  • Tested Units. In Great Working Condition. UpBright 30 days money back guarantee. 1 full year service warranty..
  • UpBright Car 2 Cigarette Lighter Plug DC Adapter Compatible with EverStart MAXX 1200 PEAK AMPS JUMP Starter with Air Compressor and Inverter Ever Start 1200A 600A Jumpstarter Box Lot 11480 12 Volt 12V 12VDC Auto Vehicle Boat RV Camper Cigarette Lighter Plug Power Supply Cord Cable PS Battery Charger PSU.
  • Compatible with: PowerStation PSX1004 Jumpstarter & Portable Power Source PSX1004IN Automotive Battery Jump Starter Item No. 1078579 Power Station.
  • Schumacher IP-1825FL IP-180KE 950A Battery Booster Jumpstarter 950 Peak Amps 12 Volt Power Instant Jump Starter.
  • Jump-N-Carry JNC1224 3400/1700 Peak Amp 12/24V Jump Starter KKC-JNC241.
  • Compatible with: West Marine Seavolt Jumpstart 400 Mk2 450 Amp Instant Starting Power Model 5406434 Jump Starter.
  • 12V Peak STANLEY FATMAX 700 J7CS jump starter Fat Max 700-Amp Jumpstarter 12 Volt.
  • Vector VEC021AC Start-It Jump Start System Multi Function AC/DC Power System.
Check Stock

Frequency Converter AD831 Single Chip High Frequency RF Mixer Radio Frequency Conversion Module for HF and VHF Receiver, 0.1-500MHz

  • WITH VARIOUS PORTS-- There is no corresponding shielding and isolation problems, therefore, compared with the passive mixer to improve the performance of the system, reduce the system cost. The mixer is designed as a single power supply, RF, IF and LO ports with DC isolation capacitor, easy to use..
  • POWERFUL-- The operating frequency of the RF and LO inputs can be as high as 500MHz. IF output is single ended voltage output. With 250 MHz output bandwidth. A single resistor connected between pins OUT and FB is used to set the gain..
  • EASY TO USE-- When the mixer's output amplifier and the optimum source impedance, the SSB noise figure of the mixer is 10.3dB at 70MHz. Different from the passive mixer, there is no insertion loss, no need external duplex device, and no need passive termination for AD831..
  • APPLICATION-- The AD831 is a low distortion, wide dynamic range, single chip mixer, suitable for HF and VHF Receiver RF-IF frequency, second mixer in DMR base sta....
Check Stock

BALDR Portable Power Station, Solar Generator with 120V Pure Sine Wave AC Outlet, Backup Lithium Battery Power Supply, 330W | 288Wh, For CPAP Camping Travel Hunting Outdoors Emergency Blackout

  • ⚡ THE PERFECT CPAP GENERATOR: The Baldr Pioneer Portable Power Station includes a 12V Regulated Output (DC to DC), which provides constant voltage throughout the night to ensure you sleep peacefully! Our generator also supports use while charging, making it the perfect companion to your CPAP System..
  • ⚡ COMPREHENSIVE BATTERY PROTECTION: Baldr’s Battery Management System protects your Power Station from overcharging, inconsistent voltage, current overload, short circuits and overheating. This unit also features a low battery alarm, fireproof shell, and shock-proof socket design to keep you and your family well protected!.
  • ⚡ WHAT’S INCLUDED: 1x Baldr Pioneer 330W Portable Power Station, 1x 8mm DC to 18V Y Connector Cable, 1x 110V AC Wall Plug Power Adapter, 1x 12V Car Charger Cable, 1x User Manual. We provide excellent 24-hour customer service, a 1 year warranty, as well as a 30-day money back guarantee on all purchases!.
Check Stock

VHBW CPAP Power Cord for Resmed Airsense 10 Power Supply, Fits for ResMed Airsense 10 S10 AirCurve 10 Series CPAP and BiPAP Machine, DC 12-24V Car Charger 24V 3.75A 90W Resmed Airsense 10 DC Adapter

  • The 24Volt power supply cable is great for plugging in your portable power station and charging your airsense 10. Please do not use it with a 12 volt power box..
  • These dc adapters for resmed airsense 10(DC plug size: 5.5x2.1mm) with 1 interchangeable connectors(DC 5.5 x 2.5mm). It is compatible with most 24V power station like Rockpals 300w/Talentcell PB120B1/ Aimtom300w/ Progeny 300w/EnginStar 350w etc..
  • This 24 V DC power cord is 3.3ft. You can use it for your Resmed Airsense 10 when camping or during power outages..
  • This DC charger cable was bent to test longer service life. ​Anti-interference magnetic ring can keep your device stable and running..
  • The airsense 10 dc converter replacement are only used for S10 (part number:37207). Please don’t use it with system one 60 series or Dreamstation series..
Check Stock