Reviews Cylinder Piston Seal

KYB 235920 Excel-G Gas Strut, Black , Silver

KYB recommended OEM replacement shock for performance cars.
Specifically calibrated to help restore the original handling and control characteristics of the Ford Mustang.
Uses a seamless working cylinder matched with a Teflon coated piston band for a positive seal and longer life.
Triple chrome plated piston rod and multi-lip oil seals that reduce wear.
Features a precision, sintered iron strut rod guide to help retain correct wheel alignment.

Fits: Honda CR-V 2.0L B20B4 B20Z2 High Performance (see description below).
High Performance Custom Made Racing Piston Ring Set.
Premium Diamond Like Carbon Coated Piston Rings, Improve Engine Performance.
Much Improved Design With More Efficient, Withstands Extreme Heat, Reduce Tension With Better Fuel Economy, Reduce Cylinder Wear.
Provides Better Seal, Improves Performance, and Decreases Oil Consumption.

CDHPOWER Super pk80 motor Replaement:Iron Sleeve Cylinder 49mm:Top End Cylinder Set and Bottom End Crank Set for 2 stroke kit 66cc/80cc pk80 motor kit.
High hole Piston kit installed well inside of cylinder and Long connecting rod AF80 or zmn80.
The casting cylinder head increases the horse power and this greatly cools off the engine. Would result better performance and longer life for your 2 Stroke Bicycle Engine. Casting cylinder head Height Max:51mm-52mm.
Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.

PK80 Replaement of Top End Cylinder Set and Bottom End Crank Set for 2 stroke kit 66cc/80cc.
better adjusting Clutch a little before riding.
PK80 Replaement of Top End Cylinder Set and Bottom End Crank Set with AF80 connecting rod.
High hole Piston and Long connecting rod.
Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.

PK80 MOTOR REPLACEMENT PARTS ONLY. piston kit is installed well inside of cylinder already.
better adjusting Clutch a little before riding.
High hole Piston and Long connecting rod.
Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.

【Cylinder Bore】: 57.4mm / Non-EGR Cylinder body.
【Full sets of parts】: Complete parts is suitable for motorcycle maintenance shop, motorcycle parts supermarket and personal use with nice price..
【Apply to】: GY6 4 stroke 125cc/150cc engine for most of chinese scooter, atv and go karts.
【Parts included】:GY6 150cc Cylinder Head Comp, 57.4mm Bore Cylinder Block, Set of 57.4mm Piston Assy, Piston, Rings and Wrist Pin, Full Set of Engine Gasket, 6pins CDI, Ignition coil, DC regulator, relay, A7TC Spark Plug, Set of Intake Manifold and Muffler Bolts, and Exhaust locking ha, Set of 14 Gram roller , Rocker Arms, Valve Seals, Oil Pump Assy with Driving Gear, Camshaft, Camshaft chain 90, belt 835*18*30, Chain adjuster, Oil screen, spring, cover and oil seal, Starter clutch, intake mani.

[Size] - 20mmx26mmx5mm Y-shape 90A mechanical seal for piston and piston rod.
[Operation Range] - Working Speed: Less than 0.5m/s.
Working Temperature Range: -35°C to 100°C (-31°F to 212°F).
[PU Material] - Oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity.
[Advantage] - Widely used in the hydraulic cylinder to prevent dust, dirt, sand, and metal debris from entering, and easy to install.
[Application] - Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure.

[Size] - 20mmx26mmx5mm Y-shape 90A mechanical seal for piston and piston rod.
[Operation Range] - Working Speed: Less than 0.5m/s.
Working Temperature Range: -35°C to 100°C (-31°F to 212°F).
[PU Material] - Oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity.
[Advantage] - Widely used in the hydraulic cylinder to prevent dust, dirt, sand, and metal debris from entering, and easy to install.
[Application] - Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure.

[Size] - 12mmx20mmx5mm Y-shape 90A mechanical seal for piston and piston rod.
[Operation Range] - Working Speed: Less than 0.5m/s.
Working Temperature Range: -35°C to 100°C (-31°F to 212°F).
[PU Material] - Oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity.
[Advantage] - Widely used in the hydraulic cylinder to prevent dust, dirt, sand, and metal debris from entering, and easy to install.
[Application] - Applied to industrial hydraulic cylinders and cylinders, hoists, moving rods of guide rods, and piston rods (pull rods), and pistons (one-way piston seals) in static pressure.