Reviews Cv Boot Tools

All Balls 19-5035 CV Boots & Joints

Expandable universal CV boot, slides and expands over reusable cone tool for trail side CV boot replacement.Material is expandable yet tough enough to be a permanent fix.Two clamping diameters ensure a good fit on most vehicles.Boot material stays flexibl.
All Balls 19-5035 Universal Ez Trail Cv Boot And Tool Kit.

... inner CV removal tool to your slide hammer then slide the adapter around the shaft behind the inner boot.
Use the slide hammer to create torque to pull out the axle.
Use lubricant fluid for added ease (not included).
[Safe for Your Vehicle] Unlike pry bars or CV axle fork tools, the CV shaft slide hammer axle attachments focus the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
Pulls CV joints on 1986-current Taurus/Sable.
[Built to Last] Heat-treated CV puller adapter with black oxide finish ensures optimal strength and durability while resisting rust and corrosion.
Inner CV axle removal tool has 48mm (roughly 2-inch) opening and a 2.5-inch depth to fit your needs.

Expandable universal CV boot, slides and expands over reusable cone tool for trail side CV boot replacement.
Material is expandable yet tough enough to be a permanent fix.
Two clamping diameters ensure a good fit on most vehicles (cut to size if needed).
Boot material stays flexible in extreme cold temperatures.
Lithium based Molybdenum grease insures good lubrication for long CV join life.

Made by plastic material, durable and practical to use.
Smooth surface, which helpful to improve the Work efficiency and save time.
It can protect the CV Boot Kit from the damage while it installed process.
Widely applies to install the stretch CV dust cover CV joint drive shaft, which is very convenient..
CV Boot Mounting Cone Tool for Universal Stretch CV Boots.

thickness 0.11" Better quality and more durable..
CV Boot Mounting Cone Tool for Universal Stretch CV Boots.
Top Diameter: 19mm (3/4 ")(Approx.) Botton Diameter: 108mm (4-1 / 4 ")(Approx.) Height: 330mm (13 ")(Approx.).
Plastic Cone Tool For Fitting Stretch CV Boot CV Joint Driveshaft CAN REUSED.

Compatibility - CV Joint Boot fit for 1999 2000 2001 2002 2003 2004 2005 Polaris Sportsman 500 2002 2003 2004 2005 Polaris Sportsman 700.
Quality - CV boot be made of neoprene, high tensile strength , oil resistance , resistance.
Function - To CV axle against damage from sand, and to solve problems such as noise and oil leakage, providing thorough ion boot for CV joint..
Tightness - Comes with 2 stainless steel clamps, great resistance to and rot. Blocking foreign material..
Tips - Please check product information carefully before placing an order.

The All Balls CV Boot material is compounded from an OEM grade DCR66 rubber that is formulated specifically for the demanding requirements of today's ATV's & UTV's.
50% More abrasion resistant than conventional CV boot material to assure long life in today's harsh off-road environments.
Rubber compound is tested to -40 degrees F to assure good performance & long life at low temperatures.
Kits include two stainless steel clamps that are designed to be tightened without the use of special tools.
Lithium based Molybdenum grease insures good lubrication for long CV joint life.

Crimping Plier Tool: Heavy-duty Ear Clamp Pincer equipped with front steel jaw and non-slip grip handles which is convenient for your installation, widely applied to single ear hose clamps, double ear clamps. Ideal for installing band style boot clamps on fuel filter, water pumps, cv joint boots, ATV axle boot, steering racks, drive shafts and other cooling system hoses. The thin head design permits good accessibility in confined areas and will not damage the press points on the ear clamps..
CV Joint Clamp Banding Tool: Made of high quality steel, use with banding straps up to 10mm (0.39in) wide, 0.6mm(0.02in) thick, with a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. (NOTE: The banding straps are not included, only ear crimp clamps shown in the picture are included. ).
Material of Ear Clamp: The CV boot clamp tool is made of high quality 304 stainless steel that are more salt resistant, anti-rust, anti-corrosion than other 201 stainless steel, Loose or damaged clamp can be harmful to your automobile and create grease spills, the new clamps can help you reseal and fastened to prevent leakage..
Ear Clamp Size Are Adjustable: Small- Adjust diameter from 0.78-1.96 inch(20-50mm), 0.275" (7mm) in width &....

Crimping Plier Tool: Heavy-duty Ear Clamp Pincer equipped with front steel jaw and non-slip grip handles which is convenient for your installation, widely applied to single ear hose clamps, double ear clamps. Ideal for installing band style boot clamps on fuel filter, water pumps, cv joint boots, ATV axle boot, steering racks, drive shafts and other cooling system hoses. The thin head design permits good accessibility in confined areas and will not damage the press points on the ear clamps..
Clamp Size Are Adjustable: Small- Adjust diameter from 0.78-1.96 inch(20-50mm), 0.275″ (7mm) in width & 0.023″ (0.6mm) in thickness, Large-Adjust diameter from 1.96-4.72 inch(50-120mm), 0.354″ (9mm) in width & 0.031″ (0.8mm) in thickness..
Material: The CV boot clamp tool is made of high quality 304 stainless steel that are more salt resistant, anti-rust, anti-corrosion than other 201 stainless steel, Loose or damaged clamp can be harmful to your automobile and create grease spills, the new clamps can help you reseal and fastened to prevent leakage..
Function and Use: These clamps are locking secure and tight on drive & CV Axle. They are good for you to replace the car broken drive shaft CV boot clamp..
What You’ll Get: 1Pcs Ear Clamps Pliers, 6Pcs Small CV....