Reviews Cutting Angle Gauge

SHALL Electric Metal Cutting Shear, 4.0-Amp Corded Sheet Metal Cutter, Variable Speed with 360 Degree Swivel Head, Continuous Cutting, Clean Cut for 14GA Sheet Metal & 16GA Stainless Steel, 2500 SPM

  • ...he double-cut blade. Compared with traditional manual metal shears and single cut shears that creating lots of tiny metal chips and wastes, ours 4-amp electric power metal shear delivers fast clean cut without creating extra wastes and air-borne dust, smooth as silk. Besides, ours key advantages are flexibility in cutting curves, efficiency, accuracy, durability and quality finish.
  • 360 degree swivel head: Cutter head can be adjusted to a desired position for delivering comfortable cuts from any angle or direction. Offer convenience for cutting straight lines, large curves, circles and irregular shapes. Loosen the three hex head bolts, firmly grip the cutter head and twist it to the desired position then tighten the three hex bolts.
  • Variable speed operation: Speed (0-2500 SPM) is allowed to vary by users. Press trigger lightly to cut slowly and press trigger heavily to cut quickly. For stop cutting, just release the trigger to turn off the shear. Flexible and easy to control the cutting speed. Variable Speeds for users to cut specific materials in different situations.
  • Cutting capacity: Cutting up to 14 gauge sheet metal and 16 gauge stainless steel. In addition, applicable for cutting wire mesh, plastic, leather, carpet, pvc pipe, cardboard and so on. ....
Check Stock

52pcs Thread Pitch Gauge SAE Stainless Steel Screw Pitch Measuring Tool (Metric&British Whitworth(52pcs))

  • ✿Metric: 6.0, 5.5, 5.0, 4.5, 4.0, 3.5, 3.0, 2.5, 2.0, 1.75, 1.5, 1.25.1.0, 0.9, 0.8, 0.75, 0.7, 0.6, 0.5, 0.45, 0.4, 0.35, 0.3, 0.25.
  • ✿Imperial: 4G, 4 1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G, 30G, 32G, 36G, 40G, 48G, 60G, 62G.
  • ✿Made of stainless steel, the toothed edges are sharply defined and the numbers are stamped and easy to read, ensure the accuracy of measurement.
  • ✿It is useful to check the tool angle when cutting threads on a metal lathe, check the angle on the thread cutting tool on the V-groove of the gauge.
  • ✿Use for check the thread size, can be used for measuring the metric and imperial screw thread.
Check Stock

VIM Hand Tools V2300 Push Pin Removal Pliers Set, 2-Piece

  • [Ensure Flush Cuts]: Whether cutting wires and trimming spurs from models or removing trim clips and pins, the ABN Panel Clip Pliers Automotive Trim Pliers will create clean, precise cuts.
  • [Flat Blade Design]: Flush right angle side cutters pliers have flat 1-inch (2.5cm) long cutter blade that provides flush cuts on up to 12-gauge copper wires.
  • 2.5mm hole allows for easy insulation trimming.
  • [Finish Projects]: Flat edge trims plastic and metal from models and circuit boards.
  • Use electronics right angle cutting pliers wire snips as push pin pliers, rivet removal tools, electrical nippers, jewelry wire flush cutter pliers, craft cutters, or floral wire cutter.
  • [Trusted Quality]: Spring-loaded panel clip cutter pliers cut quickly and cleanly and open automatically, while durable forged steel construction ensures maximum strength.
  • [Anti-Slip Grip]: 4-inch (10.2cm) long rubberized handles provide a secure, comfortable grip for convenience and optimal operation of this wire clipper automotive clip removal pliers.
Check Stock

CUTTEREX 13\ Free 360° Vinyl Laminate Floor Cutter for VCT, LVT, SPC, PVC, LVP, WPC, Rubber Floor and Rigid Core Vinyl Plank

  • ✅CUTS WIDE RANGE OF FLOORS: Cuts up to 13" wide on VCT, LVT, PVC, LVP, WPC, Vinyl Plank Flooring, Max. 6mm Cutting Thickness, Adjustable Cutting Blade Height saves operator strength. Cutting Any Unapproved Flooring Materials will be Out of Warranty.
  • ✅OUTSTANDING VALUE: Dust free, Quick, Quiet and Easy Operation. No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, NO Go Out and In House, NO Go Up and Down Staires, Time and Labor Saver..
  • ✅CUTS MMOST SHAPES ON FLOOR: Cuts at Free 360° angles, Straight Cut, "L" Cut, "П" Cut and Lengthwise Cut..
  • ✅STURDY STEEL AND ALUMINUM CONSTRUCTION: Plus Stop Fence and Angle Cutting Gauge..
  • ✅COMPACT DESIGN AND LIGHT WEIGHT: Easy to Carry and Move around..
Check Stock

DCT Taper Gauge Jig Tool Kit Set for Tapering (Angle Cutting) Wood Tapered Legs and More on Radial Arm or Table Saw

  • NO MORE GUESSING: The DCT Taper Gauge Jig Tool Kit Set for Tapering (Angle Cutting) Wood Tapered Legs and More allows for complete workpiece control when making taper or angle cuts on any radial-arm or table saw.
  • Making a taper on a piece of wood is difficult with only a table saw and dangerous attempting free-hand, so this jig with a removable and adjustable stop allows you to make tapers safely and accurately.
  • Easily taper table legs or use for construction and remodeling.
  • VARIOUS TAPERS APPLICATIONS: Reversible for left-hand or right-hand operation so anyone can cut out items like tapered table legs, tapered waste baskets, magazine racks, molding cuts, and dado cuts.
  • The thumb wing nut enables fine adjustment of the jig for all applications up to 24 inches (length of jig legs).
  • ACCURATE MEASUREMENT: Includes an easy-to-read graduated scale that measures up to 3 inches per foot or 15 degrees of taper.
  • Gauge allows you to make adjustments to change the angle to your fence so you saw safely with a consistent and reproducible taper.
  • EASY TO USE: Mark your piece of wood with the angle cut you want to create, set the taper jig next to the piece of wood and measure the distance from the marked angle to the taper jig on both the small and large sides of the ....
Check Stock

2 Pack Screw Pitch Cutting Gauge, 51 Pcs America SAE Type Screw Thread Pitch Gauge and 58 Pcs Metric&Inch &America SAE Type Caliper Gages Measuring Tool

  • 【Durable Quality】-- Made of quality stainless steel, it combines high strength, good resilience, elegant appearance. Not easy to rust and long lasting durability.
  • 【Wide application】-- Accurately measures internal and external screw threads with thread blades of varied size.
  • Use to provide the correct size drill bit, or to size fastener to determine what bit should to use. Used for checking tool angle while cutting threads in metal turning lathes, accurately measures internal and external screw threads with thread blades of varied size.
  • 【Easy To Use】-- Designed with a hole on each end, from where you press the tooth gauge, you can easily rotate the thread blades.The toothed edges are sharply defined and the numbers are stamped and easy to read.
  • 【Size】-- 51 Pcs America SAE Type Measuring range: 4-84.
  • 58 Pcs Metric & America SAE Type & British Whitworth Metric:0.25-6.0 Imperial:4G-62G US: 8, 10, 11, 14, 19, 28.
  • 【Package Include】-- 2 In 1 set Screw Thread Pitch Gauge Tool, Pitch Cutting Gauge Caliper Gages Measuring Tool.
  • 51Pcs Blade America SAE Type and 58Pcs Blade Metric & America SAE Type & British Whitworth.
Check Stock

PacTool SS701 Snapper Shear - Sheet Metal Shears - Sheet Metal Cutter Drill Attachment - Cut Up to 18-Gauge Galvanized Steel, Aluminum, and Copper - Sheet Metal Tools - Carpenter Tools and Accessories

  • ...mpared to traditional shears. Use the snapper shears to cut straight, right-angle, curve cuts, and cut circles down to 3 inches in diameter..
  • PROFESSIONAL QUALITY: This innovative shear works with any 18-volt or higher cordless drill and allows you to easily navigate while cutting. PacTool metal cutting tools are built to a standard demanded by commercial contractors...
  • POWERS THROUGH METAL: Cuts galvanized steel, aluminum, copper up to 18 gauge, and stainless steel up to 20 gauge. The PacTool SS701 cutting attachment slices through steel wire, mesh, vinyl, aluminum, siding, flashing, metal roofing, and trim coil..
  • REPLACEABLE BLADES: Detach and replace worn-down tempered steel blades with new replacements to keep the job moving. Our replacement blades are sold separately..
Check Stock

Neiko 20699A 1/2\ Drive Torque Angle Gauge, Clear

  • Torque angle gauge is used specially for later model engines that require a torque to yield fastener.
  • Easy to use arm attachment is used for holding the gauge in place for an undisturbed work flow while turn plate makes it easy to zero out the gauge.
  • 360 degree scale is large and easy to read with 30 degree intervals and 10 degree increments.
  • Specs: the angle gauge has a 1/2 inch male and female square drive ratchet handle.
  • Gauge measures angle of rotation after pre-torque in torque-angle applications.
Check Stock

GemRed 82412 Mini Digital Level Angle Gauge Angle Finder Protractor Inclinometer Aluminum Framework with Magnet

  • 【Great Repeatability and Consistency】This angle gauge is designed with accuracy of ± 0.2° and the resolution is 0.1°. The measuring range: 0 to 360° (4*90°). Display unit: DEGREE only. It provides convenience in woodworking, construction, machinery, telecommunications, automobile etc. It is pre-calibrated in factory..
  • 【Strong Aluminum Framework&Magnetic Flat Base】The digital angle gauge applied sturdy aluminum alloy instead of plastic for the main framework. It’ll provide years’ usage.【Two Measuring Mode】①Checking the true level. ②Checking the relative angle between two surfaces..
  • 【Lower Power Reversible LCD Display with ERROR indicator】 The Digital Angle Gauge has a large LCD display with backlight, which only needs one battery for providing accurate, quick and clear measurements and even you can easily read in dark environment. If the digital angle gauge is used in an incorrect position (e.g. tilts diagonally over 30 degree), display will tell ERROR to make sure that use is getting the accurate measurement..
  • 【Easy Battery Installation】You can install battery easily and need no screwdriver. WIth only one AAA battery, the digital angle gauge works 50 hours averagely. *Automatic shut-off after 5 minutes..
Check Stock