Reviews Cutting 45 Degrees

Upgraded Angle Grinder Stand Universal Fixed Grinder Holder Sliding Handle Bracket Adjustable 45 Degree Clamp with Protective Cover

  • UNIVERSAL ANGLE GRINDER STAND - Upgraded holder clamp for angle grinders within 150 mm / 5.9 in. Adjustable fixing arm for multiple types of angle grinders..
  • ADJUSTABLE CLAMPING MATERIAL ANGLE & WIDTH - The vise at the base allows flexible clamping adjustment. The maximum clamping angle can reach 45 degrees with a clamping width of 80 mm. And it holds a max 150 mm (5.9 in) width in 0 degrees..
  • USER-FRIENDLY - Just press and hold the yellow button and gently pull or push the screw rod to adjust the clamping range. Tough spring has sufficient elastic force to return quickly and does not deform after stretching..
  • SMOOTH SLIDING & ACCURATE CUTTING - the smooth sliding rail provides smooth sliding and a max 150 mm (5.9 in) cutting length. The extended non-slip handle offers a comfortable cutting experience. Fine-tuning knob and locking fixture at the vise are designed for more stable cutting. Non-slip silicone fixed shaft for more stable angle grinder holding..
  • SAFE - Extended holding handle keep your hands away from the cutting area of the saw-blade. The large and thick protective cover can effectively protect your hand and refrain iron chips and wood chips from flying..
Check Stock

PROXXON Super Jig Saw STS/E, 38530

  • Precison equipement for cutting, small and comfortable.
  • Cutting capacity with the footplate adjustable up to 45 degrees for mitre cuts.
  • Stroke speed is variable by means of full wave electronic speed control.
  • Ideal for tight curves in wood (up to 1/2"/12mm), non-ferrous metals (up to 1/8"/3mm) and plastics.
  • Scope of delivery: 1x PROXXON Super Jig Saw STS/E in a storage case. Part number: 38530.
Check Stock

DEWALT 12-Inch Compound Miter Saw Double-Bevel, 15-Amp (DW716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2x8-Inch dimensional lumber at 90 and a 2x6-Inch dimensional lumber at 45.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 - 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity.
  • Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock

Eastwood Horizontal Vertical Bandsaw Metal Cutting Band Saw Rectangular Portable

  • This Eastwood Benchtop Band Saw Is A Must For Cutting Tubing Easily And Accurately When Fabricating..
  • Make Perfect Miter Cuts From 90 Degrees To 45 Degrees.
  • Fast, Accurate Cuts In A Variety Of Materials.
  • Powerful, Variable Speed 1000 Watt Motor.
  • Pistol Grip Handle And Speed Control Trigger.
Check Stock

DEWALT Miter Saw, Double-Bevel, Compound, 12-Inch, 15-Amp (DWS716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2×8-Inch dimensional lumber at 90° and a 2×6-Inch dimensional lumber at 45°.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 – 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity. Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock

Multi Angle Miter Shear Cutter Hand Tools,45-135 Degree Adjustable Angle Scissors Trim Shears Tools

  • Designed to cuts tile trim, PVC piping, quarter round, tack strip and other light materials..
  • Suitable for cutting PVC PPR PE plastic pipe, timber strips, wire, ect. Can't cut hard wood..
  • MULTI DEGREE: The sharp blades have a cutting angle of 45, 60, 75, 90, 105, 120, 135 degrees, allowing you to freely cut differently shaped wire slots....
  • HIHG QUALITY: Sturdy steel frame with plastic cover handle for comfortable diagonal cutting, not suitable for cutting metal and stainless steel..
  • Non-slip ergonomic handle, time and labour saving, easy to cut..
Check Stock

Mini Table Saw for Crafts 4 Blades Metal Chop Saw 96W Adjustable Cut Depth 7-speed Power Supply Portable Cut Off Table Saw for Woodworking Plastic Metal

  • The 15A optimised gearbox and blade system increases motor and blade life to cut through a variety of materials including steel, aluminium, wood, even wood with embedded nails and plastic, all with just one blade that comes included with this table saw..
  • Rip cutting, assisted by an adjustable, full-length, parallel fence with measuring rail guide ensures reliable smooth square cutting every time. Set the blade to the desired angle up to 45 degrees bevel tilt and up to 60 degrees miter which covers all common cutting angles..
  • Raise and lower the blade height for trench cuts with this folding table saw. Achieve 3-1/4 in. depth of cut at 90° and 2-1/4 in. depth of cut at 45° bevel..
  • The included 28T Japanese TCT saw blade (tungsten carbide tipped blade) allows the table saw to cut effortlessly through steel, aluminium, wood with embedded nails, plastic and more.
  • For added safety, the included push stick offers safer operation when handling off cuts and the huge saw table features left and right table extensions to support wide work-pieces with a table surface area of 47-1/4 x 25-3/16 inch..
  • The all in one Rage 5-S table saw offers a collapsible frame with wheels for easy storage and portability meaning there is no need for use of a miter saw stand..
Check Stock

TFCFL 4\ Portable Mini Table Saw Cutting Machine,0-45° Adjustable Table Saw with Blade,Soft Metal Iron Sheet Cutting Machine

  • 【Main Parameters】Product Size: 15*18*11cm (5.91*7.09* 4.33inch), Net Weight: 1.92kg (4.23lb),Voltage: 110V, 60Hz,Working Voltage: DC 12-24V,Cutting Thickness: 26-29mm,Motor Speed: 9000 r/Min,Adjustable Angle: 0-45°.
  • 【Adjusting Ruler】0--45 degrees, angle adjustment. Can meet your multi-angle cutting and polishing.The motor can use strong power for a long time and easily cut all kinds of soft materials..
  • 【 Low Noise】Working and running, the noise is around 80 minutes.The machine height adjustment button can effectively control the distance between the blade and the table..
  • 【Note】 Before use, please carefully check whether the cutting material is consistent with the type of saw blade selected.
  • it is strictly forbidden to use the saw blade to cut the inconsistent material, so as to avoid damaging the saw blade..
  • 【 Wide Applications】Application Range: Can Cut Soft Metal, Wood, Plastic, Acrylic, Bamboo Material, Handmade, etc.Package: Cutting machine*1,Saw blade*1, Adapter(including plug)*1.
Check Stock

Skil 10 Dual Bevel Sliding Miter Saw - MS6305-00 & BORA Portamate PM-4000 - Heavy Duty Folding Miter Saw Stand with Quick Attach Tool Mounting Bars Orange 44 x 10 x 6.5 inches

  • Product 1: POWERFUL 15 AMP MOTOR - Delivers 4,800 RPM for quick, detailed cuts.
  • Product 1: DUAL BEVEL – Perform cuts in four positive stop positions at 48° & 45° left, 0°, and 45° right.
  • Product 1: LED SHADOW LINE - Provides high precision cuts with greater accuracy than lasers.
  • Product 1: 2x12 CUTTING CAPACITY – Cross cuts lumber up to 2x12 at 90 degrees, and 2x8 lumber at 45 degrees.
  • Product 2: A cut above - The Bora Portamate PM-4000 is the best, most practical, hassle-free stand you’ll find for miter saws or chop saws.....
Check Stock