Reviews Cranking Battery For Boat

Caliber Marine Trailer Bunk Slides 23011, 3 x 15 inch, 10-Pack White

  • Makes launching your boat or watercraft easy, slides effortlessly off bunks and into the water.
  • Dimensions: 3 inches wide x ¼ inches tall.
  • Provides extra cushioning between the boat and trailer bunks.
  • impervious to sun, weather and salt water.
  • Reduced friction and stress by 400% on the trailer cranking mechanisms, ropes and hull bow hooks.
  • Made in the USA, limited lifetime warranty.
Check Stock

Boat Load Mate: Automatic Boat Latch Secures Boat to Trailer While Launching & Loading

  • LAUNCH & LOAD YOUR BOAT WITH NO EFFORT: No more struggling on the ramp with a tow strap, dock line, or other boat trailer straps. Relieve yourself from cranking on a boat winch, tinkering with tie down straps while on the ramp. With Boat-Load-Mate you are able to launch & load your boat without using any boating equipment. In fact, you are able to get your boat in and out of the water without stepping foot on the landing. Absolutely no manual labor is required..
  • KEEP YOU AND YOUR BOAT SAFE: Spending less time on the boat ramp decreases your chance for accidents, injuries, and damage to your equipment. Boat-Load-Mate will keep you safe by reducing the amount of time that you and your boat spend in the hectic bottleneck area of a launch. Boat-Load-Mate enables you to get your boat in & out fast. Boat-Load-Mate automatically latches and catches the transom & protects your boat from falling off the trailer while on the ramp..
  • MANUFACTURED IN AMERICA: Boat-Load-Mate has been cleverly engineered and built for strength. Each unit is capable of securing 2,500lbs of direct impact. Use two units for vessels that weigh 2,500 - 5,000lbs. There is no need to use a boat trailer winch, tow ropes, or boat tie down straps to trailer while on the ramp. Of course, you sh....
Check Stock

BELEY BT-660 12V 100-3000 CCA Auto Battery Tester for All Cars Cranking and Charging System Diagnostic Tool with Built-in Thermal Printer

  • Professional 12V/24V Car Battery test: The Battery Tester adopt currently the world’s most advanced conductance testing technology to easily, quickly andaccurately measure the actual cold cranking amps capability of the vehicle starting battery, healthy state of the battery itself, and common fault of the vehicle starting system and charging system, which can help maintenance personnel to find the problem quickly and accurately, thus to achieve quick vehicle repair..
  • Multiple Battery Types-- Quickly and accurately the actual cold charging and cranking system. The battery tester is applied to 12V automotive cranking lead acid battery and 12V/24V car system test, such as cars, trucks, motorbikes, boats, and lawn mowers. It enables you to diagnose the battery’s health state without disconnecting the battery..
  • Accurate Test Results & Multi-Languages-- A wider test range (100-3000 CCA) ensures more accurate testing results, perfect for testing 12V lead-acid, flooded, AGM and gel batteries compliant with CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, and GB standards. Supports multiple languages: Including English, Russian, German, Spanish, Polish, Dutch, French, Italian, Chinese, Japanese, etc..
  • Data Printing Function -- A built-in thermal printer enables yo....
Check Stock

AWBLIN Battery Disconnect Switch 12V 24V 48V Master Isolator Cut Off Switch for Marine Boat Car Truck Camper RV Trailer Vehicles Engine Application (On/Off)

  • Operation: 1-2-both-off, 4 position, 200A DC Continuous (1hr), 455A DC Intermittent (5 min), 1250A DC Cranking (10 sec).
  • Stud Size: 3 x 5/16" (8mm), 3 mounting screw holes (8mm diameter) for 8-10MM screw connection (not included mounting hardware).
  • The patented contour locking system, allowing it to be a stand alone unit, or locked together with other switches to isolate and secure the electrical system, offers a simple economic way of separating two batteries.
  • This battery cut shut off kill switch has four removable side plates. The rear cover insulating the rear terminals against any short circuits. Equipped with 4 sets of bolts.
  • Ignition-protected. ABS plastic housing, durable made for safety use.
  • Widely used for Car, Marine, Boat, RV, Camper, Travel Trailer, Truck, ATV, UTV, Battery banks and other 0 up to 60V Devices.
  • 1 Year Warranty--a replacement or refund is guaranteed.
Check Stock

Camco Trailer Boat Winch | Features a 2-Way Ratchet and 20-Foot Strap with a 2,000lb Weight Capacity | 50000

  • Manual Trailer Boat Winch: Allows you to load your boat onto your tow trailer smoothly, safely, and accurately.
  • Features: Two-way ratchet with neutral position for ease of use.
  • A comfort grip handle provides easy, comfortable cranking.
  • Heavy-Duty Construction: The brake and 4:1 ratio gears are made of heat-treated high carbon steel.
  • The winch is constructed of corrosion-resilient zinc-plated steel that is sturdy and protects against sun damage.
  • Includes: (1) boat crank winch, (1) 20-foot (L) x 2-inch (W) polyester webbing strap, and (1) snap hook.
Check Stock

ANCEL PB100 Automotive 12/24V Power Circuit Tester Probe with ANCEL BA201 Car 12V 100-2000 CCA Battery Load Tester

  • ...ES - DC Voltage mode for reading the DC voltage with a resolution of 0.1 volts.
  • AC Voltage mode for reading the Max. voltage, the Min. voltage, and frequency.
  • Resistance mode for reading the resistance between the tip and auxiliary ground lead.
  • Diode mode for checking forward bias or reverse bias..
  • Easy to check the cranking and charging system condition. Cranking test displays cranking time, voltage and status, which helps you test and analyze the starting motor to check it works properly or not. Charging test displays load voltage, unloaded voltage, ripple status, charging system status to avoid damaging the battery and shortening its life greatly due to overcharging or incomplete charging..
  • Monitors the real-time voltage through the Waveform graph, displays current voltage, maximum and minimum voltage during ignition. According to analyze the values of discharge voltage, starting voltage, and charging voltage, you’ll know if the battery needs to be replaced or not..
Check Stock

Clore Automotive Jump-N-Carry JNC550A 1100 Peak Amp Jump Starter with Air Compressor Black

  • 18Ah Clore PROformer battery technology is designed to provide extremely high power output, extended cranking power and a long service life.
  • Built-in air compressor inflates tires and more.
  • Master ON/OFF switch with digital display shows state of internal battery.
Check Stock

2023 LAUNCH Upgraded BST360 6V 12V Car Battery Tester, Bluetooth Battery Load Tester Charging Cranking System Analyzer for Android/iPhone/LAUNCH X431, 100-2000 CCA Alternator Tester Voltmeter

  • ...etect the car battery, you no longer have to stand in front of the car waiting for your testing work, after connecting the car battery you can open the app on your phone/tablet (LAUNCH X431 Series tablets are suitable) for car battery testing work, which is customer friendly and easy to use..
  • 【Battery & Charging & Cranking Test】With LAUNCH BST360 automotive battery tester, we can check the overall health of the battery, including the cranking test, and run a complete system charging test. The cranking test is to test and analyze the starter motor to check if the starter motor is working properly, and the charging test is to check the state of the charging system to avoid damaging the battery. It is much more convenient than driving a few miles to a nearby auto repair store..
  • 【6V & 12V Battery Monitor】Our Bluetooth car battery tester is compatible with all 6 volt and 12 volt lead-acid batteries include regular flooded, AGM flat plate, AGM spiral, GEL, and EFB batteries with the test range (100-2000 CCA). Compatible with cars, motorcycles, trucks, RVs, ATVs, SUVs, boats, yachts, mowers, and even golf carts..
  • 【Fast & Accurate & Safe】 Launch BST360 is Plug-and-Play, and it provides Accuracy testing reports within seconds, greatly improved the te....
Check Stock

12V Car Battery Conductance Tester,Automotive Car Battery Load Tester with Built-in Printer for Auto Battery Analyzer

  • [Scope of Application]: This car battery conductance tester has high practicability, which can be widely applied to 12V automotive cranking lead acid battery and 12v/24v car system test.
  • [Built-in Printer]: This car battery conductance tester has built-in printer for easy printing of diagnostic test data, and it can directly test the battery with loss of electricity, no need to fully charge before testing.
  • [Advanced Technology]: This car battery conductance tester adopts the advanced conductance testing technology, which will perform an accurate test for regular flooded, AGM flat plate, AGM spiral and gel batteries.
  • [Excellent Performance]: This car battery conductance tester is designed with reverse polarity connection protection, which will not damage the tester or affect the vehicle and battery. It allows you to analyze the health of the battery to calculate the actual cold cranking capability of the battery and the aging status.
  • [Multi-language]: This car battery conductance tester supports multiple languages, customers can choose different language packs, including Chinese, English, Russian, Spanish, French, German and so on. And it can test a variety of rating systems - CCA, JIS, DIN, IEC, EN, SAE, GB.
Check Stock