Reviews Corbon Steel Fittings

PC4-M6 Pneumatic Fitting Push to Connect + PC4-M10 Straight Quick in Fitting for 3D Printer Bowden Extruder 20pcs

  • PC4-M6 fittings:thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm.
  • PC4-M10 fittings: thread M10/6mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm.
  • PC4-M6 Fittings: made of Copper, PC4-M10 Fittings is made of stainless steel.
  • Easy to install:connecting by the outer thread of the quick fitting.
  • Compatibility: compatible with 1.75mm PLA ABS 3D printer.
Check Stock

AMEBAE Aquarium Filter Cartridge for EZ-Change No.2,Fish Tank Filter Cartridge #2 for Aqua-Tech 10 to 20 Power Filters(8 Pack)

  • 【Aquarium Filter #2 Cartridge】Fit for EZ-Change NO.2 Aquarium Filter, Compatible with 10-20 power filters. Fit for 10 to 20 gallon aquariums..
  • 【High Quality Activated Carbon - Fish Tank Filter Cartridge】 AMEBAE Cartridges are packed with activated carbon. This corbon works fst af removing odors, discoloration and impurities. Over time, the carbon deactivates and must be replaced.For best results, change every 2-4 weeks..
  • 【Simple & Easy to replace - Aquarium Filter】 AMEBAE Filter Systems toke the guesswork out of changing your filter cartridge. Since all for AQUA-Tech filter cartridges come pre-assembled, there are no messy carbon pouthes to deal with. Just remove the old filter cartridge and place a new one in the filter..
  • 【Clean & Healthy Lifestyle】 AMEBAE Replacement filter cartridges can capture fine particles or dust in the water,removes the odors, water discoloration and impurities or any toxins that may hurt your aquarium. It will offers clean and fresh water for fish, make the fish more healthier..
  • 【Reusable - Aquarium Filter Cartridge 】The aquarium filter is washable and reusable ensuring long life. Replace the Aqua-Tech filter every 2 to 4 weeks. When a clogged or dirty, it can cause the aquarium to work harder and impact uti....
Check Stock

Chromex Chimney Cleaning Set - 8 Piece - 24 Foot Fiberglass Chimney Rod and 6 Inch Chimney Brush

  • Chromex 8 Piece - 24 Foot Fiberglass Chimney Rod Kit with interlocking threaded ends. Polypropylene 6 Inch chimney cleaning brush with steel center....
  • Heavy duty steel 1/4 Inch threaded fittings - Compatible with our Chromex chimney brush and all standard chimney brushes that use this size connector.
  • 8 - 3 Foot - 55 mm - strong fiberglass rods designed to absorb pressure but also flexible enough not to break..
  • Galvanized steel stem - Heavy duty twisted spiral stem for long-lasting use. 1/4 steel NPT fittings which work with our chimney rods as well as any....
  • ChromeX manufactures thoughtful tools and accessories for both the do-it-yourselfer and the professional. Customer satisfaction is our main priority,....
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • ...TE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
  • To install fittings, pull up lever on ball lock disconn....
Check Stock

4LIFETIMELINES Fitting Assortment, Union, Adapter, 24 SKU - 3/16 Inch Tube Nut

  • Contains fast moving 3/16" fittings to keep on hand when working with automotive hydraulic braking systems.
  • Fitting Assortments are designed for specialty and general repair shops. Each assortment contains a specific collection of fast moving fittings that should be kept on hand when working with automotive hydraulic braking systems..
  • Assortments are packaged in shatter-resistant, see-through plastic trays. Locator labels on the inside lid make locating, selecting, and re-filling quick and easy..
  • Works with steel, copper nickel, copper coated steel, PVF-coated, and stainless steel lines.
  • Lifetime warranty included on all products purchased from 4Lifetimelines.
Check Stock

Chromex Chimney Cleaning Set - 6 Piece - 18 Foot Fiberglass Chimney Rod and 6 Inch Chimney Brush

  • Chromex 6 Piece - 18 Foot Fiberglass Chimney Rod Kit with interlocking threaded ends. Polypropylene 6 Inch chimney cleaning brush with steel center....
  • Heavy duty steel 1/4 Inch threaded fittings - Compatible with our Chromex chimney brush and all standard chimney brushes that use this size connector.
  • 6 - 3 Foot - 55 mm - strong fiberglass rods designed to absorb pressure but also flexible enough not to break. You can combine with other rod sets....
  • Galvanized steel stem - Heavy duty twisted spiral stem for long-lasting use. 1/4 steel NPT fittings which work with our chimney rods as well as any....
  • ChromeX manufactures thoughtful tools and accessories for both the do-it-yourselfer and the professional. Customer satisfaction is our main priority,....
Check Stock

TRUEKATANA One Piece Roronoa Zoro Yubashiri Carbon Steel Katana Samurai Swords

  • Key features: real katana, 1045 carbon steel, full tang, handmade, sharpened, battle ready, alloy fittings.
  • This katana samurai sword is a full-tang, battle-ready sword, isn't just a pretty display piece.
  • Expertly hand forged by seasoned sword smiths using proven, centuries-old technique.
  • Black lacquered hard wood saya, premium alloy fittings, ray skin, cotton cord wrapped handle.
  • Overall length: 40.5 inches, nagasa length: 28.3 inches, handle length: 10.2 inches, blade sharp: sharpened, blade material: 1045 carbon steel, blade....
Check Stock

TRUEKATANA Black Samurai Theme Handmade Carbon Steel Ninjato Ninja Swords Straight Katana

  • Key features: chokuto, ninjato, black tsuba, manganese steel, black saya, full tang, handmade, blade polished, sharpened, battle ready, alloy fittings.
  • Fully handmade sword, highly polished blade, impressively sized yet easy to wield and deft in battle.
  • Following the traditional japanese process, extremely sharp hand honed edge..
  • Black lacquered hard wood saya, premium alloy fittings.
  • Overall length: 103cm, handle length (tsuka): 72cm, blade length (nagasa): 26cm, blade material: high manganese steel, blade sharp: sharpened, blade width: 1.2 inches.
Check Stock

Fuel Line Kit 3/8\ 6AN 20FT Fuel Hose Nylon Stainless Braided CPE Oil Fuel Injection Line Fitting Kit Universal

  • 20Ft Fuel Injection line with 6AN fittings: The package includes 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree) and 3/8 braided fuel line. All the an fittings feature a reusable spin-lock connector.
  • Universal Application: The AN6 nylon braided fuel hose can be worked with coolant, diesel, oil, hydraulic fluid, pump gas, air, and fuel. This braided fuel line mostly used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, transmission system and oil cooler kit, etc. Easily enough line here to run all the way from your fuel tank to the engine.
  • Excellent Flexibility and Durability: The Black Braided Steel Fuel Hose made of Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
  • The hose end AN fittings is made of high strength T6061 Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength.
  • Safety Features: The 6an push lock hose working temperature range: -40℉ to 350℉ (-40℃ to 176℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Braided gas line Inner diameter: 0.34 inch, outside diameter: 0.56inch. Please measure before purchase.
  • No Worry To Buy: Excellently Sealed, no leaking. We of....
Check Stock