Reviews Copper Pipe Fitting

LASCO 19-5513 Straight Ball Valve Compression Fitting with Integral Sleeve Nut, 3/8-Inch OD Tube and 3/8-Inch Female Pipe Thread, Nylon/Plastic

  • Nylon compression fitting with integral sleeve nut.
  • 3/8-inch od tube x 3/8-inch female pipe straight valve.
  • No need to disassemble fitting, just loosen the nut insert tubing, then tighten.
  • Use on copper, PEX, poly and aluminum tubing.
Check Stock

10 Pcs. XFITTING 1/2' Push Fit Coupling, Lead Free

  • XFITTING PUSH FIT easiest and fastest way to join copper, CPVC or PEX pipe in any combination.
  • LEAD FREE brass body. Foundation of a strong, corrosion resistant, durable fitting..
  • Approved to be used underground and behind walls without access panels.
  • Max presure: 200psi/Max temperature: 200F.
Check Stock

1/2 Inches Escutcheon Flange Plate Pipe Cover for 5/8 Inches OD Copper, PEX, and PVC plumbing Pipe Stainless Steel Chrome Plated Escutcheon Pipe Wall Cover (12)

  • Size details: the size of flange cover is about 16 x 10 x 50 mm/0.5 x 0.4 x 1.97 inches, fitting for 1/2 inches nominal copper pipe (5/8 inches OD).
  • Reliable material: the escutcheon flange cover is made of 304 stainless steel, which has nice heat resistance and corrosion resistance to many corrosive agents, and can be applied for a long time.
  • Easy installation: the flange plate cover can be easily cut with a utility knife and installed around the pipe to increase the decoration of the pipe.
  • Decorative: when the pipe passes through the wall, it will leave an unsightly surface.
  • The plate pipe cover can be decorated with a tube cover, and it can also cover up the spaces to maintain a clean appearance.
  • Wide application: the escutcheon plate can be applied in various occasions, such as, home, office, shopping mall and so on, which also can be installed with water supply devices, like kitchen faucets, sinks, toilets, dishwashers, refrigerators and so on.
Check Stock

XIFOWE Copper Tube 1/4 OD x 3/16 ID 5 Ft Tube Wall 1/32 Refrigeration Seamless Round Pipe Tubing Soft Coil Copper Tubing Used In Refrigerators Freezers Air conditioners DIY projects Etc

  • 【Size】✔ 1/4" OD - 3/16" ID (6.35-4.75mm) | Tube Wall: 1/32" (0.8 mm) | Length: 5 Feet (1.524M). Note that the actual length of the copper tube is slightly longer than 5FT because it is measured manually. In addition, when we cut the copper pipe, we used a ring cutter, which will deform the section surface, resulting in a smaller inner diameter from the section surface. Please rest assured that this will only affect the size of the section surface, but not the actual size of the copper pipe..
  • 【Material】✔Soft copper pipe copper pipe is made of high quality copper material, the surface is smooth without seam. Note, because it is made of pure copper, so the surface is inevitably easy to oxidation and discoloration, can be polished with high mesh sandpaper, will become bright and clean!.
  • 【Good Thermal Conductivity】: Good heat dissipation and refrigeration capability, high strength at low temperature. This is a good choice for refrigerators, freezers, air conditioners and other refrigeration equipment.
  • 【Shape Changeable】Soft, Because copper pipe can bend and deform, they can often be made into elbows and joints. Smooth bending allows copper tubes to bend at any angle. Or used in manufacture of magnetism instruments or meters..
Check Stock

QLOUNI 80Pcs 7-21mm 304 Stainless Steel Single Ear Stepless Hose Clamps with Clamp Crimper Tool Kit,For Water Pipe, Plumbing, Automotive and Mechanical Application

  • 10T Crimping Power: Fits 1/2"(12.7mm), 3/4"(19.05mm), 1"(25.4mm) copper tubes. Our hydraulic pipe crimping tool features excellent crimping performance, offering 10 Tons compressive force, more labor-saving, and crimping pipes in seconds..
  • Changeable Dies 1/2", 3/4", 1": With ball-bearing springs inside the head, simply slide in and out to change crimping dies of different sizes. This hydraulic copper tube fittings crimper meets your various demand fast for pipe maintenance and repair..
  • Hydraulic System: The hydraulic pipe crimper is constructed of 40CR steel with punching & forging process and powder-coated treatment. It is an integral hydraulic pipe crimping tool with a standard manual hydraulic pump..
  • Easy & Reliable: Thickened and insulated handles give you a comfortable and secure user experience. Fitted with an oil return valve, this hydraulic pipe tube crimping tool will release pressure automatically when reaching the max pressure..
  • Wide Application: The hydraulic copper pipe crimping tool is suitable for copper pipes, copper fittings & joints, copper sleeves. It is widely applied in electric power, traffic, petroleum, chemical engineering, mining, metallurgy, and shipbuilding areas..
Check Stock

Brass Compression Tube Pipe Fitting Connector, Straight Coupling Adapter,1/4\ Tube OD x 1/4\ NPT Male Connector 5pcs (1/4\ OD Compression x 1/4\ NPT Male)

  • Tube OD Compression to NPT tube adapter for converting Standard National Pipe Thread (NPT) pipe to Aluminum, Plastic, and Copper straight compression thread pipe Tubing..
  • Heavy-duty brass construction with rust proof, corrosion resistance, high temperature ductility and low magnetic permeability.
Check Stock

4PCS 1-1/2Inch Elbow PVC Fittings, 5-Way Heavy Duty PVC Pipe Fitting, Furniture Grade PVC Fitting Connector Corner Fitting for Water Supplies Build PVC Furniture DIY Garden Shelf Greenhouse

  • HIGH GRADE PVC PIPE FITTING: The PVC elbow fitting are constructed with high quality PVC furniture grade material, the surface is treated with anti-corrosion and anti aging process with strong sealing and good quality features for long service life..
  • 1-1/2INCH 5-WAY CROSS PVC ELBOW FITTING: 5-Way PVC fittings fit three segments of PVC pipe together. PVC pipe slides into each socket for a secure, square corner fit. Fasten in place using PVC solvent cement or with screws between the PVC pipe and fitting for a permanent joint..
  • PVC FURNITURE FITTING: 5-way cross side outlet elbows PVC furniture fitting are a popular part of non-plumbing applications.
  • Furniture grade PVC parts were crated when people realizing PVC is a great material for building things outside of the plumbing world. They are usually bright white and made to look great while still being strong and durable..
  • GLOSSY FINISHED WITH SLEEK LOOK: Furniture grade fitting connector means the surface without barcode or printing , glossy finished bring a sleek look.
  • PVC fitting has 5 socket ends that plus it fits standard SCH40/80 PVC pipe, great for PVC projects and crafts..
  • WIDE APPLICATION: 5-way cross PVC connector furniture grade fittings are available for build PVC furniture, water supply enginee....
Check Stock

14PCS 5-Way PVC Fittings, 3/4Inch Elbow PVC Fitting SCH40 PVC Pipe Fitting Heavy Duty PVC Furniture Grade Fitting Connectors for Water Supplies Build PVC Furniture DIY Garden Shelf Greenhouse

  • HIGH GRADE PVC PIPE FITTING: The PVC elbow fitting are constructed with high quality PVC furniture grade material, the surface is treated with anti-corrosion and anti aging process with strong sealing and good quality features for long service life..
  • 3/4INCH 5-WAY PVC ELBOW FITTING: 5-Way PVC fittings fit three segments of PVC pipe together. PVC pipe slides into each socket for a secure, square corner fit. Fasten in place using PVC solvent cement or with screws between the PVC pipe and fitting for a permanent joint..
  • PVC FURNITURE FITTING: 5-way side outlet elbows PVC furniture fitting are a popular part of non-plumbing applications.
  • Furniture grade PVC parts were crated when people realizing PVC is a great material for building things outside of the plumbing world. They are usually bright white and made to look great while still being strong and durable..
  • GLOSSY FINISHED WITH SLEEK LOOK: Furniture grade fitting connector means the surface without barcode or printing , glossy finished bring a sleek look.
  • PVC fitting has 5 socket ends that plus it fits standard SCH40/80 PVC pipe, great for PVC projects and crafts..
  • WIDE APPLICATION: 5-way PVC connector Furniture grade fittings are available for build PVC furniture, water supply engineering, installation o....
Check Stock

Pipe Cutter [1/8\ - 1 1/8\] Tube Cutter Tool for Copper Pipe, Stainless Steel Tubing, Metal, Plastic, Brass - Copper Pipe Cutter - Compact & Tight Space Rigid Tubing Cutter Set for Plumbing

  • HANDYMAN’S BEST FRIEND – Our tubing cutter is especially designed to assist plumbers, electricians & mechanics – whether it’s used as a screw cutter, copper cutter, steel cutter, brake line cutter or an exhaust cutter..
  • PLACE, ADJUST AND ROTATE – Cutting copper tubing has never been easier. Simply, put the tube in the slot where the blade is, adjust to the appropriate setting and rotate your tube. It’s never been this effortless to cut copper tube..
  • NOT JUST FOR COPPER – Our pipe cutting tool isn’t just a great copper tube cutter but also can also cut steel pipe, stainless steel tubing, aluminium piping, PVC and iron. However, we do not recommend cutting PVC pipe as it’s a lot more difficult to cut..
  • GREAT FOR SMALL SPACES – Looking for a fantastic copper pipe cutter for tight spaces? Look no further! Our small pipe cutter fits perfectly in restricted spaces. Our metal tube cutter is also great as an accurate arrow cutter..
  • EXTRA BLADE – Our mini pipe cutter also comes with an extra blade so you can cut as much steel tube as possible. We truly believe our Pipe Cutter is the best in the marketplace and we stand by that. If our tube cutter doesn’t cut it, we’ll FULLY REFUND YOU. So, click "Add to Cart" now and buy with confid....
Check Stock