Reviews Copper Groove Inner Tube

(5000pcs) 1/2-13 Security Break Away Nuts Zinc Die Cast Ships Free in USA by Aspen Fasteners, AFTPR-171110-M5

  • Tri Groove Security Nuts are made of Zamak 5 Zinc Alloy (95% Zinc, 4% Aluminum, 1% Copper). Zamak is an alloy of Zinc and Aluminium, sometimes also incorporating Magnesium and Copper..
  • The added copper in Zamak 5 increases the strength, hardness, and corrosion resistance of the alloy, but reduces its ductility and dimensional accuracy compared to other Zamak Alloys..
  • Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
  • May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.
Check Stock

(500pcs) 1/2-13 Security Break Away Nuts Zinc Die Cast Ships FREE in USA by Aspen Fasteners, AFTPR-171110-D

  • Tri Groove Security Nuts are made of Zamak 5 Zinc Alloy (95% Zinc, 4% Aluminum, 1% Copper). Zamak is an alloy of Zinc and Aluminium, sometimes also incorporating Magnesium and Copper..
  • The added copper in Zamak 5 increases the strength, hardness, and corrosion resistance of the alloy, but reduces its ductility and dimensional accuracy compared to other Zamak Alloys..
  • Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
  • May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.
Check Stock

Tubing Flaring Swage Tool Kit - Heavy Duty Steel Swage Tool Set for Copper Plastic Aluminum Thin Pipe With Tubing Cutter Tubing Bender & Ratchet Wrench

  • Note: The picture is for reference only, the actual product shall prevail. Material:Aluminum alloy steel cutter body, surface plating..
  • Tubing Cutter: suitable for cutting pipe diameter between (3-28mm)1/8-inch to 1-1/8 Inch for Pipe Copper PVC Thin Stainless Steel Tube..
  • 3 in 1 Pipe Bender: Three sizes of tubing 1/4", 5/16" and 3/8". Bending 0-180 degree copper , aluminum ,brass,and thin stainless steel pipes in the....
  • Double Flaring Tool Kit:This flaring tool kit is an tool for pipe flaring, and it can be used to make single or double flares on copper, brass and....
  • Easy to Use:The Screw of the pipe cutters provide easy control of cutting pressure for clean cuts.Flare groove rollers make rotation simple and....
Check Stock

CG2-11 PIPE CUTTER MAGNETIC GAS MACHINE TORCH BURNER BEVELER CUTTING PIPE BEVELING ​MACHINE

  • 【Perfect Set】The set includes a heavy duty tube cutter, mini tubing cutter and an inner-outer reamer. It can not only meet your pipe cutting need, but also fast clean inner reaming and outer deburring needs. The pipe cutting tool is very suitable for cutting pipes of aluminum, copper, PVC, thin stainless steel tube..
  • 【Exquisite Craftsmanship】MATEWORK professional heavy duty pipe cutter is made of high-quality aluminum alloy & SKD steel with high hardness up to HRC52. It has 6 pieces of individual bearings allowing for increasing cutting speed. Precise rolling control makes every cut smoother and more accurate in pipe cutting. After many tests, the cutting capacity up to 3/16 to 2-inch outside diameter with the thickness of 1/6-inch..
  • 【Meet Your Needs At Any Time】Mini tubing cutter is Specially designed for small diameter tubes in confined spaces, cut through 1/8 to 7/8-inch outside diameter pipes with a maximum thickness of 1/10-inch especially for use in restricted areas where a complete turn is not possible, improve your work efficiency..
  • 【Deburring Tool】Pipe reamer has 3/16 to 1-5/16 inch outside diameter capacity. It can be quickly, cleanly and conveniently applied to the inner diameters of copper, aluminum, PVC and soft steel t....
Check Stock

Eastman EBC832S CC Tuba

  • The stainless steel piston has a very smooth and fast action, which can improve agility and playability.
  • The detachable valve section is ideal for full access to areas normally inaccessible to maintenance technicians.
  • This Sousaphone horn is made of special brass for wind music, and the ratio of copper, zinc, tin and nickel is very stable. This makes the wind instrument have a transparent and full tone and good resonance..
  • Tonality: B lower, material: brass white copper, surface treatment: lacquered gold.
  • Nozzle diameter: 660mm, inner tube size: 18.5mm.
Check Stock

CB Coax Cable,RG58 Coaxial Cable 49.2ft,UHF PL259 Male to Male Cable 50 Ohm Low Loss for CB Radio,Ham Radio,SWR Meter,Dummy Load,Antenna Analyzer

  • 【Cable Type & Details】- PL259 UHF Male to UHF Male coaxial cable ▏Cable type: RG58 ▏Conductor Material: pure copper ▏Cable length:....
  • ⭐【Heat shrink tube lengthened to 6 cm】- Compared with other UHF cable,our improved heat shrink tube has been lengthened to 6cm,both ends are....
  • 【High Cost-Performance Low Loss Cable】- About 50ft pl-259 low loss coaxial cable is made of solid copper inner conductor,tinned copper braid and....
  • 【Application】- This pl259 jumper cable is widely used in CB Radio ,Ham Radio,Amateur Radio,Power/SWR Meter,Transceiver,HF Radio,VHF....
  • 【Package Included】- 1x 49.2Ft UHF Male PL259 to UHF Male PL259 RG58 Digital Coaxial Cable.
Check Stock

zuzu New Oboe C Tone Rosewood Body Golden Key Silver Plated Profession Sound Wooden Oboe Parts

  • The use of built-in copper hoop design makes the vibration more stable when the pipe body passes through..
  • The tube body is beautiful, the sound quality is good, and the tone color is loud, giving full play to the attributes of the copper tube body..
  • The opening position and height are digitally controlled, and the opening error of the inner chamfer design is controlled to 0.01 mm..
  • The cork pad covers the connection part, which is easy to assemble and has good air tightness. The best combination of expressiveness and brilliance, comfort and exquisite workmanship, provide good air tightness..
  • The oboe perfectly combines expressiveness with brilliant and comfortable feeling, and exquisite workmanship, which is very suitable for solo or orchestral instruments..
Check Stock

LUTER 3 Pieces Teflon Tube PTFE White Tubing 1m + 3 Pieces Quick Fitting for PC4-M6 + 3 Pieces Straight Pneumatic Fitting Push for PC4-M10 to Connect for 3D Printer 1.75mm Filament

  • PTFE Blue Tubing - the blue color teflon tube outside diameter 4mm, inside diameter 2mm, density 2.15-2.20g/cm3.
  • PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm.
  • PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm.
  • Premium Material - the teflon tube made of durable PTFE (Poly Tetra Fluoro Ethylene) material, PC4-M6 Fittings is made of Copper.
  • Attention - small 3D printer accessories, please keep away from children.
Check Stock

1/2\ Od X 2 Ft. Straight Copper Tubing Type K Kh03002

  • Copper Tube Shape Straight, Hard, Application Water, Copper Tube Coating None, Temp. Range 100 Degrees F to 400 Degrees F.
  • Standards ASTM B280, ASTM B306, ASTM B819, ASTM B88.
  • Max. Pressure 1130 psi, Tube Length 2 ft, Copper Tube Type Type K.
  • Tube Size 3/8 in, Inside Dia. 0.375 in, Outside Dia. 1/2 in, Wall Thickness 0.049 in.
Check Stock