Reviews Copper Based Board Pcb

TOWOT Desolding Pump & 2PCS Desoldering Wick (Length: 1.5m; Width: 2.5mm) Used to Remove the Solder and Disassemble Electrical Components, No-Clean Solder Wick Braid

  • Solder Sucker with Super Suction: With a desoldering pump designed with a double ring and a "vacuum" button, you can easily remove the solder on the circuit board by tilting it up and pressing the button with one hand..
  • 3-in-1 Solder Set: 2 PCS copper solder braid is made of copper and rosin geometrically accurate braiding, when it is heated, it can quickly absorb and melt to remove excess solder, avoiding short circuits, size (length: 1.5m.
  • width: 2.5mm), Suction Pump Size (length: 21cm)..
  • High-Quality Materials: The desoldering vacuum pump is made of high-quality ABS material, coated with a sponge, non-slip and heat-absorbing, nylon nozzles, anti-static and heat-resistant. Comfortable grip and durable..
  • Widely Used: Desoldering wicks and desoldering pumps can be used to correct small board errors on the PCB, re-soldering and desoldering, removing relays and other components from the printed circuit board, etc. To meet your various soldering needs..
  • Value Package: 3-in-1 soldering package, commonly used soldering tools, improve your work efficiency. 30 days no reason to return or exchange, please feel free to contact us if you have any questions!.
Check Stock

Electronics-Salon Prototype Screw/Terminal Block Shield Board Kit for Arduino MEGA-2560 R3.

  • Prototype Screw/Terminal Block Shield Board Kit For Arduino MEGA-2560 R3..
  • FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm..
  • Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm. Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm..
  • Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs )..
Check Stock

6 Packs Solder Wicks No-Clean Solder Braided Wicks Desoldering Wicks, 2.5mm Width 1.5m Length

  • What you get: come with 6 packs of no-clean solder wicks, each wick is about 2.5 mm/ 0.1 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs.
  • No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards.
  • Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency.
  • Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work.
  • Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
Check Stock

WZRELB 3000Watt Pure Sine Wave Inverter 48V DC to 120V AC with 2 AC Outlets + AC Connect Terminal Block, 2 Sets of Battery Cables for RV, Solar Syste, Camping

  • 3000W continuous 6000W peak true pure sine wave solar power inverter, as good as grid power, power backup for home power supply..
  • Transfer 48VDC to 120VAC, 60Hz frequency, dual US outlets. Intelligent temperature control cooling fan. Earth connection for both PCB board and output. Digital LED display..
  • High quality true copper inductance, filter the wave form, ensure the true pure sine wave AC output, safeguard your equipment. All big imported mosfets with strong driving capacity..
  • The PCB thickness is 2.00mm, allow the stronger current floating on the circuit, increase the load capacity. High frequency transformer to transfer DC to AC , ensure the stable and full AC output.
  • Free standard battery cables and spare fuse for replacement. CE EMC approved.
Check Stock

ASUS SBC Tinker board RK3288 SoC 1.8GHz Quad Core CPU, 600MHz Mali-T764 GPU, 2GB

  • High performance QuadCore ARM SOC 1.8GHz with 2GB of RAM -The Tinker board features the Rockchip RK3288 Soc with Mali – T764 GPU and 2GB of Dual Channel DDR3 memory.
  • Non shared GBit LAN, Shielded Wi-Fi with upgradable antenna support – Tinker board features a high speed non shared GBit LAN port for improved performance along with integrated shielded Wi-Fi for robust IOT & network connectivity.
  • Highly compatible PCB & Topology –Leveraging industry standard PCB & topology dimensions along with IO and connection placement, Tinker board offer extensive compatibility with SBC accessories & chassis..
  • HD Audio & HD & UHD Video Support – Tinker board supports HD audio 192/24bit audio along with accelerated HD & UHD ( 4K ) video playback support* requires use of Rockchip video player in TinkerOS.
  • DIY Friendly Design – Tinkerboard features multiple DIY friendly use features including a color coded GPIO header, silkscreen PCB and color coded pull tabs.
Check Stock

10 Pieces No Clean Soldering Flux Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux Pen for Electronics Welding Repair Tabbing Wire Maintenance

  • ... size: the no-clean solder wick is about 1.5 m/ 59 inches long and 2.5 mm/ 0.1 inches wide, and liquid flux brush flux pen is about 15 x 1.5 cm/ 6 x 0.6 inch, convenient to hold.
  • Please check the size carefully before purchasing.
  • Multiple reliable materials: these no-clean braided soldering wicks are made of quality copper wire, using nice weaving technology, which can enhance surface tension and absorb excess solder.
  • And flux remover pen adopts quality material, non-leakage, flux safe and prevents you from being exposed to organic solvents.
  • Practical tools: soft brush tip flux pen releases a moderate stream of liquid to clean components without spoiling the PCB copper foil or IC pins.
  • Solder remover has good thermal conductivity and absorption, helping to reduce the risk of thermal spoiling to the board.
  • Broad utilization: these flux pens and braided solder wicks can be applied in laboratories, computers, home repairs and to correct small PCB errors and through-hole joints, electronic soldering and much more, bringing a lot of convenience and efficiency to your work.
Check Stock

CNC 6040 CNC Router Kit 3/4 Axis CNC Router Machine Acrylic PCB PVC Wood Carving DIY Ideas Milling Engraving Machine (Parallel 3 AXIS CNC 6040)

  • ☛ This CNC 6040T machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes..
  • ☛ Used for Engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin double color plate, PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc..
  • ☛ Work with Various Materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite board plywood. and soft metal .like aluminum, copper and silver to engrave them into 3D/2D works etc..
  • ☛ The mini CNC router Frame is movable. The machine can connect with computer as other external device such as printer, scanner, etc..
  • ☛ With the assist of the CNC ROUTER 6040T, your design idea will be real-time display..
Check Stock

XT30 XT60 Balance Board RC Lipo Battery Parallel Charging Board,2 in 1 PG Parallel Charging Plate XT30 XT60 Plug Supports 4 Packs for 2S-6S Lipo Battery

  • 2 in 1 lipo battery parallel charging board lipo charger,supporting XT60 connector and XT30 conector lipo battery.It is just a parallel charging board, not a diret charger, need to connect with a charger which support the balance port ( JST connector).
  • Thicken PCB copper foil, allow security using 35A charging current..
  • This lipo balance charging board supports up to four packs of the same type, same cells 2S-6S lipo battery pack,such as 2S lipo battery,3S lipo battery ,4S lipo battery,5S lipo battery,6S lipo battery..
  • Equipped with 40A fuse between any two groups of batteries, to prevent line burned due to the large battery pressure.
  • Output Connector:XT30 connector /XT60 connector,support xt30 and xt60 lipo batteries..
Check Stock

Electronics-Salon 8 Channel DPDT Signal Relay Module Board (Operating Voltage: DC 5V)

  • 8 Channel DPDT Signal Relay Module Board, DC 5V Version..
  • FR-4 fiber glass PCB, dual copper layers. Dimensions: 72.5mm x 150mm ( L x W )..
  • RY5W-K high quality signal relays, LED indicator for each relay channel. Darlington transistors circuit driving relay, improve the reliability of action..
  • Pitch 3.81mm / 0.15" screw terminal block, wire range 26-16AWG, strip length 5mm / 0.2", Metric M2 slotted screw..
  • Datasheet: https://images-na.ssl-images-amazon.com/images/I/A1vg1+5HA8L.pdf.
Check Stock