iUniker Raspberry Pi 4 Case, Pi 4 Case with Dual Fan Rpi4 Case with Cooling Fan with Raspberry Pi Heatsink, Simple Magnetic Removable Case for Pi 4 Model B/ 4B (Clear New)
- Very Easy to Set up - New Design Raspberry Pi 4 Case with Magnet Makes your Pi Case Easy to Install without any Screws..
- Good Cooling Performance with Dual Active Cooling Fan Design - Your Pi case can emit heat directly to the air and turn off your Pi's TEMP with dual cooling fan and 4 heatsinks. It can provide double effect for your Pi..
- New Layers Arcylic Panel Design - The acrylic made by the latest technology is thicker and stronger. The transparent material allows you to see the indicator light status of your Raspberry Pi at any time..
- Unique Raspberry Pi Case - It can make your Pi look cooler and quieter than others..
- Note: Raspberry Pi 4 board is not included..
Check StockCONISY RGB LED Series 120mm Case Fan for Computer Case Unique Ultra Quiet Long Life Gaming PC Cooling Fan - Colorful 2Pack
- Soft and bright visual experience: The Conisy LED PC Case Fan Shows Horgeous and Vivid Visual Effect.which will make your PC case cooler and stand....
- Wide Compatibility: Standard 120mm size,Compatible with all types of computer case,Suitable for PC air cooling fan and water cooling radiator..
- Silent Cooling and Long Service Life: Advanced Hydraulic Bearing for reliable, quiet operation.service life of more than 20,000 hours..
- Easy to install, use and maintain: Dual interface design, Use 3Pin connector to mainboard fan interface,or Use 4Pin connector to Power molex..
- Delivery: 2Pcs 120mm PC Fan.The quality assurance: If you have any questions, please contact us.product quality problems, 90 days replacement. We will....
Check Stock
Thermalright TL-C12CW-S X3 CPU Fan 120mm White ARGB Case Cooler Fan, 4pin PWM Silent Computer Fan with S-FDB Bearing Included, up to 1550RPM Cooling Fan（3 Quantities）
- 【High Performance Cooling Fan】 Automatic speed control of the motherboard through the 4PIN PWM fan cable interface, which can determine the speed according to the temperature of the motherboard, with a maximum speed of 1500RPM. Configured with up to 55cm of cable for PWM series control of fans, ideal for cases and CPU coolers..
- 【Quality Bearings】The carefully developed quality S-FDB bearings solve the problem of pc cooling fan blade shaking in lifting mode, keeping fan noise to a minimum while providing maximum cooling performance when needed and extending the life of the fan..
- [Excellent LED light] The high-brightness LED atomizing argb fan blade can effectively reflect the light, making the ARGB lighting effect softer, and it matches the cooler and case more perfectly. Up to 17 modes of light effects with ARGB support, color can be managed and synchronized through the port on motherboard..
- 【Silent Fan Size】 Model: TL-C12CW-S X3, Size: 120*120*25mm, Speed: 1500RPM±10%, Noise ≤ 25.6dBA Connector: 4pin pwm, Current: 0.20A, Air Pressure: 1.53mm H2O, Air Flow: 66.17CFM, Higher air flow for improved cooling performance..
- 【Perfect Match】The PC fan can be used not only as a case fan, but is also suitable for use with a cpu cooler to create a....
Check StockDeco Gear Mid-Tower Computer Case with 3-Sided Tinted Tempered Glass 3 Dual Ring RGB Cooling Fans and Remote Control for Custom Lighting ATX M-ATX M-ITX 7 PCI Slots 8 Expansion Bays USB 2.0/3.0
- BEAUTIFUL FUNCTIONALITY - Combining beautiful design aesthetic, natural cooling airflow, ample expansion, and ideal mid-size case form factor, the....
- QUALITY BUILD - Built from cold-rolled commercial quality steel, this mid-tower PC case gives you the base to build a machine as expressive and as....
- READY FOR CUSTOMIZATION - The DGPCS20X is to be powered by an ATX power supply as well as accepting ATX, Micro ATX, and Mini ITX internal components.....
- MAXIMIZE COOLING AIRFLOW - Included with the DGPCS20X are 3 cooling fans located at the front of the case behind the tempered glass. Using specially....
- MUST HAVE ACCESSORIES - Cut down on dust and debris from entering your case with included removable mesh fan covers. The front of the case offers two....
Check Stock
Segotep Phoenix ATX Black Mid Tower PC Gaming Computer Case USB 3.0 Type-C Ports / Graphics Card Vertical Mounting with Tempered Glass & RGB Front Panel (PC Case ONLY)
- Sparkling LED Lighting: The case has a addressable RGB LED Strip in the front panel to get a vivid lighting effect .It can be easily controlled by 5V 3 pin rgb header on motherboard (5V 3 Pin addressable LED headers and VDG headers ONLY)..
- Graphics Card Vertical Mounting: It allows users to securely mount the graphics card, or any PCI Express card vertically inside your case. Different from Graphics Card horizontal installation, It’s no need to worry about deformation..
- Superior Airflow and Cooling: The case is design for better cooling performance. Users can install 3 fans in the front to intake the air from outside and exhaust the hot air with 2 fans in the rear to cool the internal components efficiently. .
- Tempered Glass Side Panel: With a sleek and sturdy tempered glass in side of the case to show off hardware and internal components..
- Builder Friendly: With room for front and rear radiators, and it support up to 167mm High CPU Cooler and up to 323 mm Long graphic card Installation..
- Please note the item is PC Case ONLY, cooling fans are not included..
Check Stock
Gaming Case Full Tower with Tempered Glass Side Panel & ARGB LED Mirror Supports 7x120mm Fans GAMEMAX Abyss-TR
- 【GAMEMAX Abyss-TR Gaming Case Upgraded Version】This excellent gaming case with an infinity mirror with Rainbow LED lighting(addressable) on the front and a tempered glass on both front panel and side panel, these looks great in your game setting..
- 【Remarkable Expansion】Support motherboards up to E-ATX, ATX, Micro-ATX.
- GPU 455mm length (MAX), CPU Cooler Height 165mm (MAX), ATX PSU 200mm (MAX Length) and Internal Bays: 2 x 3.5 Tool-less HDD Bays and 4 x 2.5 SSD.
- 【Excellent Heat Dissipation】Supports 7*120mm water cooling fans and three-sided installation of water cooling systems, with exceptional airflow for advanced cooling and unhindered performance.
- in addition, the ventilation holes are designed on the both sides of the panels, which meets the needs of cooling hardware during your game..
- 【Cable Management & Dust-proof】This neatly internal design of the chassis provides convenient cable management. Dust filters on the bottom can effectively prevent dust from entering the computer case..
- 【Easy To Control】Inner chassis comes with V1.7ARGB Controller Hub. Control fan and led strip on the panel by both manual and motherboard, provides personalized colorful configuration to gamer..
Check Stock
darkflash INF8 120mm ARGB PWM Case Fans with Controller for Pc Case Computer Cooling System 3Pin-5V Addressable RGB Motherboard SYNC Cooling Fan (3Packs White)
- [infinity mirror Designed High Performance PWM Fan]The 120mm PWM fan delivers Low-Noise for automatic speed control and ultra-quiet operation for extreme CPU cooling performance..
- [Perfect Cooling Performance]Tuned for high-airflow, large volume cooling, silent operation as an excellent choice for case cooling..
- [Performance Engineered]The 9 blades are designed with screw threads and output air volume, which can effectively optimize the air duct of the case..
- [Silent Cooling Technology]The fan is surrounded by a soft material damping pad, which absorbs vibration at high speed and achieves a silent effect..
- [Addressable RGB Light]The addressable RGB light brings your PC builds amazing colorful lighting effects, which can be controlled by motherboard with 5V 3pin ARGB port. Note: if your motherboard without 5V 3pin ARGB port, you need to buy an extra controller..
Check Stock
Fanhasi 8 GPU Mining Rig Frame Case for ETH Crypto Miner with 8 GPU Mining Motherboard & 2000W Power Supply & 128GB SSD & 4G RAM & 8 Cooling Fans (Without GPU)
- 8 GPU Slots Mining Rig System: Designed for Ethereum miner, you can put at most 8 Pcs GPU cards in the mining case. 65mm gap between each GPU ports gives the video cards enough space for air circulation for cooling. It's fit for most GPU card except 3060. NOTE: GPU cards are NOT Included.
- 110V - 264V Input Power Supply: Built in 2000W PSU is designed for mining rig with up to 90% conversion efficiency. 110V - 264V universal AC input design allows you to enjoy mining at home easily. Without any modifying, it can work at a household voltage of 110V..
- 8 Pcs Powerful Cooling Fans: This ETH mining rig case comes with 8 PCS adjustable cooling fans which help to accelerate air convection and keep the GPU card working at high performance. With the help of controller, you can control the fan speed to reduce the noise..
- Case Type Mining Machine: The Ethereum miner case is made of high quality steel material which is sturdy and durable, can fully protect your GPU and electronic devices from damage. NOTE: GPU cards which are longer than 12.6 inch / 32cm in length are UNAVAILABLE for this mining rig..
- Mining Rig Including: B75 motherboard, 2000W Supply Power (110V - 264V input ), CPU, 128GB mSATA SSD, 4G DDR3, 8 PCS 4500 RPM cooling fans. (NOTE: GPU cards are NOT Inc....
Check StockAntec SpotCool System Cooler
- Mount virtually anywhere inside a case on a motherboard post.
- 3-speed switch lets you balance quiet performance with maximum cooling.
Check Stock 
