Reviews Connection Couplings

Mecanum Wheel with Coupling 4PCS Omnidirectional Wheels 4WD Smart Robot Car Kit Accessories 65mm Robot Kit Drive Wheel for Arduino/Raspberry Pi DIY STEM Project

003cp003e65mm engineering plastic mecanum wheels (2x left, 2x right) include 2 right wheels and 2 left wheels. Each wheel consists of 9 rollers and 003cb003ecan be driven independently.003c/b003e003c/p003e.
003cp003eMecanum wheels can be moved 003cb003ein any direction without changing the direction003c/b003e of rotation of the wheels. Each of the four mecanum wheels contains a series of rollers whose axis of rotation makes a 45 ° angle to the plane of the wheel.003c/p003e.
003cp003eThe mecanum wheels suitable for 003cb003eLego 003c/b003ecross shafts, can also be fitted with N20 motors by installing 3mm couplings, TT motors by installing TT motor couplings, GA25-370 by installing 4mm couplings, and 5mm couplings by installing with stepper motor.003c/p003e.
003cp003eThis mecanum wheels used for 003cb003eRaspberry Pi 4/3B+/3003c/b003e,Micro:bit and 003cb003eArduino Project 003c/b003ecompatible with DC motor.003c/p003e.
003cp003eThe mecanum wheel made of high hardness plastic,and 003cb003elow pulsating noise003c/b003e. Omnidirectional Wheels are not easy to damage. The mecanum wheels have a long service life and no deformation.003c/p003e.

Air Chief industrial interchange quick connect plug for connecting directly to a hose with a male NPT end to connect with a female NPT threaded connection.
Air Chief industrial interchange quick connect plug with a male NPT threaded end.
Valveless construction allows flow when disconnected.
Stainless steel 303 for better machining characteristics than stainless steel 316.
Interchanges with MIL-C-4109F/A-A-59439 specifications for quick-disconnect couplings for hoses and portable pneumatic tools, but not water or fluids, at maximum working pressures up to 232 psi (16 bar).

【High-grade Silicone Oil】Our Excavator Pressure Gauges have built-in high-grade silicone oil, which will not turn yellow, has better shock resistance and higher accuracy..
【12 Couplings】This Excavator Pressure Tester Kit comes with 12 different couplings, perfect compatible with Caterpillar, Hitachi, Komutsu, Daewoo, Hyundai, Kato, Kawasaki..
【High-quality Gauges】The housing of our three gauges (3500PSI/6000PSI/9000PSI) is stainless steel and Polycarbonate glass, so they are sturdy, durable, impact resistant, and clear display..
【Complete Kit】Comes with 12x Couplings, 3x 65'' Test Houses, 3x Pressure Gauges, and 1x Sturdy PP Suitcase..
【Warranty】We provide 3-year warranty and 24-hour friendly customer service. Pls feel free to contact us if you have any issue about our product..

Connection Diameter: 3mm to 1/8 inch, Total Length: 26mm /1.02 inch, Outside Diameter : 10mm/ 0.39 inch.
Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold....
Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
high torque with rigidity, low inertia and excellent sensitivity..
NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..

General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs..
It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage..
Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called ""..
Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission..

Air Chief industrial interchange quick connect plug for connecting directly to a hose with a male NPT end to connect with a female NPT threaded connection.
Air Chief industrial interchange quick connect plug with a male NPT threaded end.
Valveless construction allows flow when disconnected.
Stainless steel 303 for better machining characteristics than stainless steel 316.
Interchanges with MIL-C-4109F/A-A-59439 specifications for quick-disconnect couplings for hoses and portable pneumatic tools, but not water or fluids, at maximum working pressures up to 232 psi (16 bar).

Air Chief industrial interchange quick connect plug for connecting directly with a hose with a male NPT end to connect with a female NPT threaded connection.
Air Chief Industrial interchange quick connect coupler with a male NPT threaded end.
Valved construction automatically shuts off flow when coupler is disconnected..
Stainless steel 303 for better machining characteristics than stainless steel 316.
Interchanges with MIL-C-4109F/A-A-59439 specifications for quick-disconnect couplings for hoses and portable pneumatic tools, but not water or fluids, at maximum working pressures up to 232 psi (16 bar).

[4 Pressure Gauges] - This pressure test kit includes 4 high precision silicone oil gauges: 1500psi(100bar), 3500psi(250bar), 6000psi(400bar), 10000psi(600bar)..
[10 Couplings] - The hydraulic gauges kit has 10 pcs couplings: G1/8, G1/4, G3/8, M10*1, M10*1.25, M12*1.5, M14*1.5, UNF7/16-20, UNF9/16-18, Quick connector B..
[High Quality Materials] - Advanced silicone oil, stainless steel waterproof gauges, carbon steel couplings..
[Thicken Portable Case] - All parts are neatly placed in a thickened case with non-deforming sponge to better protect the product..
[Wide Application] - This excavator pressure gauge set is suitable for most brands of excavators, such as Sany/Caterpillar/CASE/John Deere/Komatsu/HITACHI/Kawasaki/Kato, etc..