BELL 5400-5 Extension Box Adapter, 1 Gang, 9.5 Cu-in, 5-1/4 in L X 3-1/2 in W X 1-1/2 in D, 1/2 In. NPT , Gray

  • State of the art powder coat finish provides maximum weather ability and scratch resistance.
  • Internal hub threads comply with NEMA requirements and will accept all threaded fittings and threaded conduit.
  • Three 1/2 In closure plugs, installation hardware, gasket, and ground screw included.
Check Stock

Jonard Tools ROD-3316 Coated Fiberglass Fish Tape Duct Rodder with Accessory Kit 3/16 x 300

  • CONDUIT RUNNING: Lightweight and portable, this rodder unit is perfect for running conduit inside and outside conduit drops as well as home drops from the hand-hole box to a building.
  • VERSATILE USE: Used for light pole wiring, control wiring, or walker ducts and rod can be pulled horizontally or vertically.
  • NON-CONDUCTIVE: Made with a non-conductive fiberglass core with a yellow nylon coating for high visibility and flexibility.
  • HIGH TENSILE STRENGTH: Can withstand loads up to 200 kgf (441 lbf) for quick and easy pulling.
  • LIGHTWEIGHT & COMPACT: 22” X 17” X 7” (55.88 cm x 43.18 cm x 17.78 cm) and weighing 14.33 lb (6.5 kg) for easy transportation.
Check Stock

Liquid-Tight Conduit and Connector Kit,Flexible Non Metallic Liquid Tight Electrical Conduit,3/4inch 25ft Electrical Conduit Kit,with 5 Straight and 3 Angle Fittings Included,3/4 in Dia

  • 【PREMIUM Liquid-Tight Conduit】- Length :25',ID:3/4inch,OD:1inch,Thick: 2.5 mm The Flexible Non Metallic Liquid Tight Electrical Conduit....
  • 【Complete Accessories】-3/4-Inch 25Foot Flexible Electrical Conduit with 5 Straight and 3 90-Degree Conduit Connector Fittings.
  • 【Safety and Sturdiness】-Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • 【Effortless Installation】-The Liquid-Tight Conduit Fits is fast, and only one person can complete the work in a few minutes. flexible conduit....
  • 【Wide Application】-HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment,....
Check Stock

BodyJewelryOnline Black Anodized Titanium Ear Plugs [1 Pair] Large CZ Gem Screw-Fit Closure 7/16 11mm Gauge Size Easy [Insertion/Removal] 316L Surgical Stainless Steel

  • Sold as pair: BodyJewelryOnline sold as a pair of earplugs for ear lobe body piercing jewelry. The ear lobe plugs feature large CZ gems and screw-fit closure. Simple yet classy design. Wear it with any outfit - casual or formal, it compliments all..
  • Titanium anodized: The ear plugs are titanium anodized which gives it a quality finish smooth surface. The anodized coating makes the plugs long-lasting and useful for prolonged wear..
  • Measurements: The ear plugs are 7/16"(11mm) Gauge Size.
  • High-quality material: The ear lobe plugs are made up of 316L Surgical Stainless Steel. The material is autoclave safe and hypoallergenic. Perfect material for people with metal allergies. The ear plugs are finely polished giving it a smooth surface. Comfortable to wear. Easy insertion and removal..
  • Satisfaction guarantee: We ensure full customer satisfaction. In case you are not satisfied with the product, you can return it within 30 days from the purchase date. Though, You may be charged a restocking fee of up to 50% of the item's price for used or damaged returns and up to 100% for materially different items..
Check Stock

Liquid-Tight Conduit and Connector Kit,Flexible Non Metallic Liquid Tight Electrical Conduit,1inch50ft Electrical Conduit Kit,with5 Straight and3 Angle Fittings Included,1 in Dia 50FT

  • 【PREMIUM Liquid-Tight Conduit】- Length :50',ID:1inch,OD:1.22inch, The Flexible Non Metallic Liquid Tight Electrical Conduit kit ​is....
  • 【Complete Accessories】-1-Inch 50Foot Flexible Electrical Conduit with 5 Straight and 3 90-Degree Conduit Connector Fittings.
  • 【Safety and Sturdiness】-Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • 【Effortless Installation】-The Liquid-Tight Conduit Fits is fast, and only one person can complete the work in a few minutes. flexible conduit....
  • 【Wide Application】-HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment,....
Check Stock

Milwaukee M12 12-Volt Cordless PVC Shear (2470-20) (Power Tool Only - Battery, Charger and Accessories Sold Separately)

  • Patented Shear Mechanism: Allows for cuts up to 2-inch Schedule 80 PVC..
  • Quick Blade Return: Increases productivity in repetitive cuts..
  • Stainless Steel Blade and Aluminum Jaw: Impact, water and rust resistant..
  • Razor-Sharp Pierce-Point: Burr-free cuts on PVC, CPVC, PEX Tubing, BlazeMaster, ABS, Non-Metallic Conduit, and Rubber Hose..
  • Power Tool Only - Battery, Charger and Accessories Sold Separately..
  • Powerful Mechanism - Cuts up to 2" schedule 40 PVC in 3 seconds. Ultra Sharp Blade with Pierce Point - No burrs or shavings to remove.
  • Offset Blade - Cuts PVC / PEX in-wall, in-ground, or close to wall Quick Return Blade - Increased productivity during repetitive cuts. All Metal Planetary Drive - Delivers over 200 cuts per charge.
  • Stainless Steel Blade and Aluminum Jaw - Impact, water and rust resistant.
  • Variable Speed Trigger - Controlled cut in warm or cold weather.
  • On Board Fuel Gauge - Displays remaining run-time.
Check Stock

RIDGID 3-Outlet Power Ball Extension Cord Plus USB

  • 2 USB ports with 3.4A to fast charge your devices.
  • 3 AC Outlets with polycarbonate spring loaded covers.
  • 8 ft. - 14-Gauge kink free cord provides maximum flexibility and durability.
  • 3.4 Amp/17-Watt USB power to fast-charge a tablet and smartphone at the same time.
  • Circuit breaker with reset protects against overloads.
  • Heavy-duty rubber jacket and hexacore polycarbonate body for impact resistance.
  • Outlets with extra space for bulky plugs.
  • Snap-close outlet covers with easy-open grips.
  • Flexible strain relief protects against cord damage.
Check Stock

Morris Products Conduit Hanger With Bolt Features –1/2 Inch - Secures Rigid, EMT Conduit to Mounting Surfaces – Insulated Supports - Zinc-Plated Steel – Threaded Rod - 100 Pieces

  • SECURE CONDUIT: Ensure that your Rigid and EMT conduit is safely secure to mounting surfaces with this conduit hanger with bolt features..
  • DURABLE CONSTRUCTION: Morris Products’ Conduit Hangers with Bolt Features are manufactured from zinc-plated steel for ultimate durability..
  • SIZE AND QUANTITY VARIETY: Choose the exact size of conduit hangers you need with the variety from Morris Products that includes ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2”, 2 ½”, 3”, 3 ½” and 4”. Obtain quantities of 25, 50 and 100 in each pack..
  • IDEAL FOR MOUNTING SURFACES: Take less time to complete each task when equipped with these high-quality conduit hangers that include hardware, insulated supports and a threaded rod..
  • COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..
Check Stock

SOUTHWIRE CCPR400S Cutter, Cable RATCHETING (CCPR400S)

  • Product 1: QUICKLY SPLITS: the armored jacket on #10, 12, and 14 armored cables and 3/8" flexible conduit.
  • Product 1: ADJUSTABLE: cutting depth for standard and reduce diameter box/mic cables.
  • Product 1: STORES: up to 6 blades in handle knob.
  • Product 1: DURABLE DIE CAST EPOXY: enamled construction.
  • Product 2: Conduit fitting reaming screwdriver that perfectly reams and smooths 1/2.
Check Stock