Reviews Concrete Parts Making Machine

QUIKRETE Quick Setting Cement for Concrete Sculpting, Repairing Steps, Curbs, Floors, Retaining Walls, and More, Just Add Water, 10 Pound Pail

  • Quick setting cement mix ideal for repairs and settings where rapid setting concrete is necessary.
  • Ideal for repairing floors, steps, curbs, retaining walls, concrete pipes, sculpting projects, and more.
  • Unique properties allow users to sculpt material as it begins to harden for added convenience.
  • Initial setting time: Approximately 10 minutes.
  • Can be mixed with water or with QUIKRETE Concrete Acrylic Fortifier to further enhance the bond.
  • Minimum water content: 1 part of water to 5.5 parts of material.
  • Maximum water content: 1 part of water to 3.5 parts of material.
  • Cement mix can be built to a thickness of 1 to 2 inches without sag on vertical surfaces.
  • Note: Do not use QUIKRETE Acrylic Fortifier and Concrete Bonding Adhesive in combination.
  • Refer to datasheet for precautions, surface preparation, physical properties, and more.
Check Stock

The Hillman Group 260288 1 1 1 1/2 x 8-Inch Anchor Bolt, 50-Pack

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Qty 25 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolts, Wall Anchor Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Qty 6 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

CONFAST 3/8 x 6 Flat Sleeve Anchor Zinc Plated 25 per Box

  • VERSATILE - Can be installed in a wide variety of masonry, solid concrete, brick or block.
  • 360 DEGREE EXPANSION - Provides consistent holding values in a wide range of base materials.
  • PRE-ASSEMBLED - Ready to install no separate parts required.
  • ALL STEEL PARTS - Heavy duty for the most demanding jobs.
Check Stock

BEAMNOVA Electric Concrete Vibrator Handheld 11000 Vibration Per Minute 2HP with Shaft of 14-3/4 Feet

  • EFFICIENT & LONG REACH - BEAMNOVA concrete vibrator features of powerful 110V 60hz 1500W electric motor and vibrating head that gain speeds up to 11000 rpm. Vibrator shaft is of 1-1/2 diamter and the length is up to 14-3/4 ft. It helps to enlarge your work range and improve work efficiency..
  • USEFUL - Immerse the head of concrete vibrator into wet concrete to remove any trapped air and excess water to allow the concrete to settle within the formwork properly and solidly. Also you can use it to level the concrete..
  • USER-FRIENDLY DESIGN - Metal-Built Case is ot non-scrolling design, lightweight, rugged and durable, able to prevent cement from penetrating. The vibrating 1-1/2 inch head is capable of inserting into concrete via small holes or gaps. 14-3/4 ft vibrator shaft can reaches deeper and farther..
  • WIDE APPLICATION - It helps to remove air bubbles, and excess water and level the concrete. Great for patching and construction job, pouring process of cement pillars, onstruction of highway fence and bridge, pouring process of cement grape rack, etc..
  • Note: When the item doesn't work after staring, pls gently tap the head of the vibrator to engage it. If the machine still does not start after this operation, please kindly contact us. This machine can only b....
Check Stock

MISSYOUNG Double Sided Woodworking Tape 1 Inch x 82 Feet Two-Sided Woodworker Tape for Woodworking, CNC Work,Crafting, Wood Template Routing, Removable & Residue Free

  • ...he double sided woodworker’s tape to resist curling, making it easy to manage, adhere and remove, shortening the preparation time and effort needed on each template..
  • APPLICABLE MATERIALS: Suitable to be used on wood, aluminum, steel, Peek, PMMA/plastic (not fiberboard), concrete, tile, marble and so on. This tape is thin but strong adhesive. Its intended purpose SPECIALLY is to fasten templates/jig to wood, plastic, aluminum and steel for marking and cutting. It needs to hold the template firmly, but still allow its release due to removable performance..
  • SIZE: 25mm Width, 82 Feet Length. Optimal thickness enables the double sided wood template tape to be applied and peeled off easily from the wood. Does not lift or chip off the wood’s surface, making it a perfect companion for woodworkers..
Check Stock

Sodium Tru Hard | Sodium Silicate Concrete Densifier & Hardener (5 gal)

  • Fills the pores of the concrete just below the surface and deeply into the concrete and provides a positive seal that resists deicing chemicals, water, grease and oil.
  • Prevents “dusting” of new and old concrete floors and will seal the concrete to significantly reduce the level of radon gas.
  • Highly effective in making concrete physically stronger and denser protecting it against frost and salt while increasing its resistance to stains, acids, alkali, moisture, mold and mildew.
  • Used as an economical polishing aid in floor and concrete countertop diamond polishing.
  • Generally used on interior or exterior concrete for sealing and dust-proofing in one operation on warehouse floors food storage areas educational and medical facilities.
Check Stock

Stark USA KIT61041 Cement Trowel 22" w/Float Pan 6.5hp 196cc Gas Engine Walk Behind Concrete Surface Finisher Epa

  • For maximum flexibility, engine type, trowel diameter and handle type can be selected to meet individual preferences or job site conditions.
  • Power Trowel is an equipment used for most areas of concrete straightening. It's an extra-strong machine, designed to allow a perfect finish of the concrete.
  • Powered by a 6.5 HP Loncin G200FA motor equipped with four blades that finish off the concrete slabs with ease. Created with industrial grade material that can withstand heavy use and provide you excellent finishing on concrete.
  • Walk-Behind Trowel is an easy to use machine while finishing off the concrete that you have poured. Reducing the manual labor with this device you can cover more ground in the same given time on a job.
  • With the included float plan, push down imperfections and prepare the surface the final concrete finishing.
Check Stock