Reviews Concrete Hardened Pipe

Concrete Saw 14 Electric Demo Saw Concrete Cutter 5800W Circular Saw with Blade and Pump Wet Dry Cutting for Concrete Marble Granite Light Bricks Wood 110V

14‘’Adjustable Diamond Saw Blade: This electric concrete saw with a large-size sharp saw blade, maximum cutting depth is 5.3" with segmented axles....
Dry/Wet Dust Free Cutting: This circular saw is equipped with a water pump and water pipe fitting. The water pipe is used to supply water to the saw....
Flexible Concrete Saw : The flexible concrete cutter is equipped with 2 handles（4.7L”*4.7W）, the front handle can be rotated 180°, and the rear....
Built-In Copper Motor: 110v, 5800w motor adopts stacked height increase winding technology, which makes the motor power strong and does not consume....
Widely Use: The powerful electric cutting machine is suitable for indoor and outdoor use. It can be used for plumbing and electrical engineering....

COMBINATION VISE: The Yost Vises 34C 6-inch utility combination pipe and bench vise are made from 65,000 PSI Tensile Ductile Iron body parts. It has hardened, replaceable steel pipe jaws as well as hardened steel flat serrated jaws and continuous rolled thread on the main screw. The pipe jaws are set back to allow for the machinist's vise use..
TECHNICAL SPECS: Jaw Width 6" (15.24 cm), Jaw Opening 10" (25.4 cm), Throat Depth 7.5" (19.05 cm), Min Pipe Capacity 0.25" (0.635 cm), Max Pipe Capacity 6" (15.24 cm)..
SWIVEL BASE: Interlocking swivel base with 360-degree motion and 2 lockdowns..
HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that ....

[What You Will Get]: 35mm, 40mm, 50mm, 65mm, 82mm and 110mm core drill bits, SDS+ arbors, pilot drills and a 300mm SDS+ extension shank.
[Tungsten Carbide Tip Drill]: This top-of-the-line TCT (tungsten carbide tip) core set offers faster cutting speeds and longer service life, making....
[Technical Application]: 35mm-45mm hole saw extension concrete cement wall drill bit for drilling water pipe and heating pipe, 55mm-80mm drill for air....
[Durable Material]: This sds plus extension shank hole saw drill bits for concrete cement is very solid, using high-quality alloy welding, for the....
[Widely Used]: This masonry hole saw kit easily drills holes on common wall materials, such as brick, adobe, concrete, cement, and stone, widely used....

Concrete Screw Flange 5/8" Head (depending on the length, it will be either full or partial threaded). The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Ceramic coating exceeds 500/hrs salt spray resistance.
An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. Hole should be of a depth equal to the required embedment plus 1/2”.
Concrete screws should be installed a minimum of ten anchor diameters between each other. They have an advantage over most other types of masonry anchors in that they can be installed close to the edge of t....

PLASTIC PIPE CUTTER – Resists rust, corrosion and streaking and comes in a beautiful chrome plated finish..
STEEL CUTTER BLADE – Saw tooth hardened steel cutter blade cuts plastic pipe from 1-1/4 in. in diameter..
ATTACHES TO POWER DRILL – Steel shaft attaches to power drill..
FLUSH CUT – Allows for a flush cut to the ground..
REQUIRES – Use on plastic pipe only. Requires a power drill for use..

Complete Deluxe Bushed Drum Replacement Kit Designed for Edco CPM-8 Scarifier/Concrete Planer.
Includes: Fully Assembled Drum with Long Lasting Cutters, Shafts, and Spacers.
78 pcs of 6 point 1-3/4" Carbide Flail Cutters.

Cuts up to 2-5/8-Inch copper and iron pipe.
Grooved rollers accept flared pipe ends to provide cuts directly below the flare. Solid frame for greater strength.
Cutting wheel is made from bearing tool steel for maximum durability. Includes fold-out deburrer with positive lock and two cutting edges.
Hardened Acme threads for greater cutting strength.

Find ferrous and non-ferrous metal up to 6 in. (152 mm) deep in concrete and other non-metallic surfaces.
Automatically differentiates between magnetic metal (such as rebar) and non-magnetic metal (such as copper pipe).
Shows the depth of metal from the surface in both inches and centimeters.
Helps map out the grid of metal through any nonmetallic construction material, including concrete, tile, and marble.
Ideal for finding and/or avoiding rebar, cables, pipe, nails in reclaimed wood, nails/tacks in studs behind lath & plaster walls, electrical boxes and....