Reviews Concrete Expansion Joint Material

Reedny,Eyebolt Bolt Stainless Steel Wall Concrete Brick Anchor Expansion Bolts Ring Screw Eyes,Heavy Duty Anchor Fastener Eye Bolt M8 4 Pcs

  • ★【Package Content】4pcs Expansion Hook Bolts..
  • ★【Size】M8* 80 expansion bolt with eye ring anchor.Thread diameter: 8mm, length excluding ring: 80mm.Need to use 12mm/0.47" drill hole for drilling..
  • ★【Material】Made of high quality 304 stainless steel, suitable for using indoor, outdoor even in humid environment, wear-resisting, anti-corrosion, high rust resistance..
  • ★【Use】in concrete and masonry. Widely used in fence,burglarproof doors and window,canopy,air conditioning fixation,home decoration,engineering, etc.Note: If the load has a large vibration, looseness may occur, so it is not recommended to install a ceiling fan..
  • ★【Easy to install】 Expansion is created by tightening a threaded bolt which draws a tapered cone expanding a sleeve against the walls of the hole..
Check Stock

M8* 80mm Expansion Screw with Eye Ring Anchor Internal Eye Bolt Fastener 304 Stainless Steel 5 Pack (Ring Lifting Expansion Eyebolt M8* 80mm)

  • ★【Package Content】8pcs Expansion Hook Bolts..
  • ★【Size】M6* 80 expansion bolt with eye ring anchor.Thread diameter: 6mm, length excluding ring: 80mm.Need to use 10mm/0.39" drill hole for drilling.
  • ★【Material】Made of high quality 304 stainless steel, suitable for using indoor, outdoor even in humid environment, wear-resisting, anti-corrosion, high rust resistance..
  • ★【Use】in concrete and masonry. Widely used in fence,burglarproof doors and window,canopy,air conditioning fixation,home decoration,engineering, etc.Note: If the load has a large vibration, looseness may occur, so it is not recommended to install a ceiling fan..
  • ★【Easy to install】 Expansion is created by tightening a threaded bolt which draws a tapered cone expanding a sleeve against the walls of the hole..
Check Stock

PC Products 72561 PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair, 8.6 oz Cartridge, Gray

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
  • Formulated for anchoring threaded rods, bolts, rebar dowels and smooth dowels into concrete, grout filled block and unreinforced masonry..
  • PC-Concrete is excellent for filling and repairing cracks in concrete, and out-performs all caulks and hydraulic cements..
  • PC-Concrete will not come loose from any cleaned concrete surface and will hold during expansion and contraction of concrete..
  • PC-Concrete is the best solution for permanent concrete repair..
Check Stock

Low Profile Shower Drain 90mm 36L/min Water Flow, ABS Plastic Chrome Plated Low Profile P Trap Side Drain for Bathroom, Flexible Drain Pipe 40mm 50mm Dual-Purpose Design

  • ... drain is made of ABS material, which has stable working performance and can be used for a long time.
  • the drain pipe is made of high-quality PP material, which is corrosion-resistant and wear-resistant, effectively prolonging the use time of the product.
  • Dual-Purpose Joint Expansion Pipe: Our drainage expansion pipe is designed with 40mm/50mm dual-purpose joint, which is suitable for most sewer pipes.
Check Stock

L-A M8x70 304 Stainless Steel External Hex Expansion Bolt Screw Sleeve Anchor Expansion Screw Bolt Burst (5 Pcs)

  • Standard size M8 expansion bolt, 70mm total length, with flat washer and hex nut..
  • High quality 304 stainless steel. Sturdy and firm, resistant to rust and corrosion. Concrete anchor and masonry anchor , easy to be mounted..
  • Widely used in fence,burglarproof doors and window,canopy,air conditioning rach fixation,home decoration,engineering,etc..
  • If the wall is built by relatively soft brick , it may need to make the hole which is 1mm smaller than the suggested..
  • Air brick, foam concrete block,are not suitable for these expansion bolts..
Check Stock

Hard-to-Find Fastener 014973269470 Lag Expansion Shields, 1/4 Short, Piece-12

  • Expansion shield anchors for use with lag screws are designed to anchor into concrete, brick, and block..
  • Expansion shield anchors consist of pre-assembled two-part expansion shields..
  • These anchors expand as a lag screw is fastened through the anchor..
  • These anchors feature very precise tapered internal threading to permit easy turning of the lag screw..
  • Zinc plating adds a layer of corrosion resistance to the anchors..
Check Stock

M12 x 80mm Ring Lifting Expansion Eyebolt Bolt Screw with 304 Stainless Steel Anchor Bolt

  • [MATERIAL]: Made of high quality 304 stainless steel, they have good corrosion resistance, rust resistance and high hardness, which provides a longer service life, can be used indoor and outdoor, even in humid environment..
  • [APPLICATION]: Expansion eyebolts are suitable for fastening items to concrete, bricks and walls, they are widely used for hanging heavy objects, fixing wire ropes, home decoration, engineering installation, etc..
  • [HOW TO USE]: 1. Select a bit with the same diameter as the expansion screw casing, install it on the electric drill and dirll a proper hole.
  • 2. Insert the expansion bolt into the hole, tighten the nut with a wrench and then tighten the lifting ring..
  • [PRECAUTIONS]: 1. When using percussion drills to punch holes, they must be punched vertically, and the hole diameter cannot be too large, otherwise the tightness will be affected. 2. When it is installed upside down on the roof, it must be installed on a solid material. It is not suitable to install overweight objects, nor can it install machines with large vibrations, because there is a risk of falling due to vibration and overweight..
Check Stock

SFEEEXUN Heavy Bag Ceiling Mount Bag Bracket, Punching Bag Swivel Hanger for Boxing Bag Yoga Hammock Chair Swing Include 2 Screws for Wooden and 2 Expansion Bolts for Concrete

  • 【PREMIUM MATERIAL】- Made of high-quality 304 stainless steel, the punching bag hanger is anti-rust, corrosion-resistant, capable of withstanding bad weather. Easily supports heavy bags up to 1000lb..
  • 【EASY TO INSTALL】- Heavy duty heavy bag hanger is easy to install, including 2 screws for wood(Style C not include), 2 expansion bolts for concrete(Style C include 4 expansion bolts) and 1 carabineer for more secure mounting. Can be installed in a few minutes..
  • 【360-DEGREE SWIVEL】- 360-degree swivel is designed for hanging bags(Style B and C can’t swivel), helping to lessen the stress on the punching bag mount and add extra support. The swivel chain can turn side to side without getting tangled up..
  • 【WIDELY USED】- Punching Bag Holder Fits indoor & outdoor, works well on a concrete ceiling or wooden beam, good for kick Boxing, Muay Thai Bag, hammock swing kit, suspension straps & resistance trainers, Battle Ropes, Yoga Swings, etc..
  • 【100% SATISFIED】- If you are not satisfied with this heavy bag bracket, please feel free to contact us, we will try our best to make you satisfied..
Check Stock

L-A M8 304 Stainless Steel Expansion Tube Anchor Expansion Pipe Internal Expansion Bolt M8 for Solid Wall and Drywall Anchor(5 Pcs）

  • [MATERIAL]: Made of high quality 304 stainless steel, they have good corrosion resistance, rust resistance and high hardness, which provides a longer service life, can be used indoor and outdoor, even in humid environment..
  • [APPLICATION]: Expansion screws are suitable for fastening items to concrete, bricks and walls, they are widely used for fence, canopy and equipment installation, air conditioning fixing, home decoration, engineering installation, etc..
  • [HOW TO USE]: 1. Select a bit with the same diameter as the expansion screw casing, install it on the electric drill and dirll a proper hole.
  • 2. Insert the expansion bolt into the hole, tighten the nut for 2 to 3 turns and unscrew the nut when expansion bolt si very tight without any looseness, and then remove the lock spring and washer.
  • 3. Align the fixing holes with the bolts and install. Put in the washer and lock spring in sequence, screw in the nut, and tighten it with a wrench..
  • [PRECAUTIONS]: 1. When using percussion drills to punch holes, they must be punched vertically, and the hole diameter cannot be too large, otherwise the tightness will be affected. 2. When it is installed upside down on the roof, it must be in....
Check Stock