Polygem Liquid Concrete Repair (LCR) Kit Penetrating Injection Epoxy for Foundation & Concrete Crack Repair & Leak Prevention DIY Complete Kit Repairs Average Concrete Foundation Crack of 8 feet

  • Use for leak repair in basement concrete foundation repair, industrial and residential concrete floors, patios, sidewalks, balconies, pools and parking decks, reservoirs, tanks and more..
  • This product restores the structural integrity of the cracked wall by filling the crack with a high-strength adhesive that essentially "welds" the cracked wall together. This is not an expansion foam product..
  • Excellent adhesion to concrete, wood, fiberglass, and metal surface.
  • Wait 24-hours after applying epoxy paste to the crack for proper cure. After injecting the epoxy from cartridges, wait another 24-hours for full cure..
  • Each kit contains enough material to repair an average 1/16 inch wide, 8-foot crack in a concrete wall.
Check Stock

Protimeter BLD8800-S MMS2 Basic Survey Kit Moisture Meter with Pouch

  • Measures moisture in wood and wood floors, drywall, concrete and concrete block, stucco, plaster, masonry and other building materials.
  • Measure (pin mode) diagnoses the extent of moisture intrusion for damage assessment and monitor drying out of building structures.
  • Search (non-invasive mode) behind ceramic tile, fine finishes, water stains, tile and vinyl floor coverings, wood, drywall, plaster, masonry, concrete and concrete block.
  • Hygrometry measures or monitors buildings for adequate ventilation affecting indoor air quality and moisture problems.
  • This Package Includes: MMS2 Instrument, Short Humidity Quickstick, Hygrostick Humidity Probe, Quickstick External Lead, Heavy Duty Moisture Probe, Deep Wall Probe (5″), Calibration Check Device, Instructions, Software And Cable, Soft Carry Pouch.
Check Stock

Sakrete 865005 Series 5.5OZ Crack Repair 5.5 oz

  • Rapid repair of cracks in concrete slabs, driveways or sidewalks.
  • Repair broken concrete steps or curbs without using forms.
  • Applications 1/4” to 2” in thickness.
Check Stock

TEACH Flat Head Phillips Drive Concrete Screw to Anchor Masonry, Block & Brick,270-Piece

  • Concrete Screw Flange 5/8" Head (depending on the length, it will be either full or partial threaded). The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Ceramic coating exceeds 500/hrs salt spray resistance.
  • An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
  • Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. Hole should be of a depth equal to the required embedment plus 1/2”.
  • Concrete screws should be installed a minimum of ten anchor diameters between each other. They have an advantage over most other types of masonry anchors in that they can be installed close to the edge of t....
Check Stock

DIY Basement Floor & Slab Crack Repair Kit (Repairs Approximately 80 to 200 ft) - Repair Concrete Cracks in Driveways, Patios, Sidewalks and Basements

  • Repair cracks in concrete floors, garages, patios and driveways..
  • Permanent repairs done in about an hour..
  • User-friendly with step-by-step instructions to ensure a proper repair..
  • Dispensing of material done via a standard caulk gun..
  • We are a pioneer of low pressure concrete crack repair dating back to 1987..
Check Stock

12" Segmented Diamond Saw Blade for Concrete, Brick, Block and Masonry, 12mm Segment Height, 1" Arbor

  • MULTIPURPOSE - 12" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind.
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone.
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
Check Stock

Concord Blades TPD040A2CP 4' Sandwich Tuck Point Diamond Blade 1/4' Inch Segment Width for Mortar removal, Grout repair and cleaning of Concrete, Brick, Block, Stone and Masonry applications

  • Blade intended for mortar removal, grout repair and cleaning of concrete, brick, block, stone and masonry applications.
  • Package Dimensions : 5.0 L x 5.0 H x 1.0 W (inches).
Check Stock

Agri-Fab 45-0365 Push Spike Aerator, Black

  • Expose grass to air, nutrients, and water.
  • Steel weight tray holds concrete block, creates pressure and pushes spikes into ground.
Check Stock

Concrete Molds DIY Grass Concrete Paving Block Concrete Pavers & Paving Stones S62

  • Sold 1 piece Concrete Molds (FOTO 2) Grass Concrete Paving Block.
  • Size 19.68 in x 19.68 in x 2.36 in (500x500x60 mm) Mold is reusable.
  • The mold is made of ABS plastic thickness of 0.078" (1.9-2 мм) Depending on the geometry of the product wall thickness can form less than the above dimensions..
  • Perfect for parking areas in residential and commercial developments, Grass Concrete Paving Block is a great choice if you need a paving product that truly complements its surroundings..
  • This concrete paver is perfect for area that require detailed water management and drainage, need to withstand heavy traffic and abuse. Grow grass in the voids or fill them with gravel to allow rainwater to permeate through and help with areas that suffer from excessive rain water runoff. These pavers are recommended for creating attractive and functional paths, patios, courtyards, driveways and to create off street parking areas.
Check Stock