Reviews Computer Board Connector

Monitor Memo Board Computer, Monitor Sticky Note Holder, Acrylic Transparent Message Board for Office 1 Set(Left & Right) by Lechay

  • Packaging Includes: 1set computer monitor memo board. Our message board is 11in long and 3in wide..
  • Material: Our monitor memo board computer is made of acrylic..
  • Product Use: Our monitor message board is easy to use. Just peel off the sticker film on the back and stick the sticky note board on the side of the monitor. Our monitor memo board computer uses 3M stickers, which will not damage the monitor and can be used at ease..
  • Application: Our monitor memo board can be pasted not only on the computer monitor, but also on the TV, cabinet, dresser, etc. With the monitor message board, you can make your note appear on the monitor message board neatly. The note record is clear at a glance, and you can see it at any time..
  • Customer Service: If you are not satisfied with our monitor memo board, we support refund..
Check Stock

uxcell 20pcs DIP IC Chip Socket Adaptor Solder Type 2.54mm Pitch Dual Row 8 Flat Pin 7.6mm Row Pitch

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

65W AC Adapter Fit for Dell Latitude 13 3000 3301 3310 3310 2-in-1 P114G P114G001 P118G001 P95G002 Laptop Charger Power Supply Cord

  • Fit for Dell Latitude 3310 P95G002,Latitude 3310 2-in-1 P118G001,Latitude 3301 P114G P114G001 Laptop.
  • Input: 100-240V~1.6A 50-60Hz Output: 19.5V-3.34A Watts: 65 Watts (45W compatible).
  • How to use the dual connector: This is a dual connector with a small connector change to a big connector. If your computer is suitable for a 4.5*3.0mm connector, you can directly use the connector on the power cord. If your computer is suitable for a 7.4*5.0mm connector , You can connect the 4.5*3.0mm connector of the power cord to the adapter cable, so that you can use the 7.4*5.0mm connector to charge the computer.
  • What you get:1 x AC Adapter & 1 x 4.5*3.0MM Power Cord & 7.4*5.0MM Conversion Cable,A conversion cable is included to fit most 65w Dell laptops..
  • Service & Support:30 Days Money Back Guarantee and one year warranty / Please contact us with any questions or concerns - we are here to help.
Check Stock

youyeetoo Tinker Board 2S AI Single Board Computer, 4GB RAM 16GB eMMC Support 4K Dual Display , onboard WiFi Bluetooth HDMI DP DSI Android 10 Debian 9

  • [ULTIMATE PERFORMANCE FOR IOT DEVICES] Tinker Board 2S is a single board computer base on RK3399 an Dual 2.0 GHz Cortex-A72 and Quad 1.5 GHz Cortex-A53, GPU Arm Mali-T860.
  • [WI-FI AND BLUETOOTH] Tinker board 2S use 802.11ac Wi-Fi with 2x2 dual-band 2.4/5 GHz antennas deliver transfer speeds. Integrated Bluetooth also opens up the convenience and freedom of wireless connectivity with a wide range of devices, including speakers, headphones and game controllers..
  • [RICH CONNECTIVITY: USB 3.2 GEN 1]Tinker Board 2S has three USB 3.2 Gen 1 Type-A ports and one USB 3.2 Gen 1 Type-C (USB-C) port, for data-transfer speeds that are up to 10X faster than USB 2.0 - plus the convenience of any-way-up connectivity..
  • [DUAL-DISPLAY SUPPORT] Tinker Board 2S supports dual displays at up to 4K UHD resolution, so it's equipped for compelling visual output. It also has three popular display interfaces built in, including HDMI, DisplayPort over USB-C and DSI, for superb flexibility..
  • [EXPANDABILITY FOR EMBEDDED SOLUTIONS]1. RTC battery header 2. SD card slot (rear side) 3. Fan connector.
  • [COMPREHENSIVE PROTECTION] 1. Short-circuit damage prevention 2. Electrostatic discharge protection 3.Overvoltage protection World-class circuit-protecting power design.
Check Stock

Ethernet Splitter Cable RJ45 Network Adapter, Onepeace 1 Male to 2 Female LAN Internet Cable Adapter, Suitable Super Cat5, Cat5e, Cat6, Cat7

  • Ethernet Splitter RJ45 1 to 2 allow 2 computers to share high speed DSL, cable modem or other Ethernet ports. NOTE: Don’t support 2 computers that connect to the internet simultaneously, ONLY 1 output port is working..
  • 【Enjoy High-speed Internet Access】Pure Copper Gold-Plated Needle with Eight Cores, Watching movies, chasing dramas, surfing the Internet, playing games, etc., lossless transmission rate is fast, so that buffering is faster without waiting..
  • 【Extensive Compatibility】Suitable for equipment with RJ45 interface, computer, router, network box, optical modem, can be used as an extension, compatible with Cat5/5e/6 7..
  • 【Thicker PCB】The Ethernet splitter connector adopts thicker PCB board, gold-plated needle core, and integrated mechanical welding to avoid damage caused by wire leakage..
  • 【Plug and Play】Connector A: 1 to 2 RJ45 Ethernet splitter, Connector B: RJ45 . This RJ45 1 to 2 RJ45 Ethernet splitter can help you avoid pulling cables back and forth, Installation simple and easy to use..
Check Stock

Treedix Prototype Breakout Breadboard Adapter Expansion Board for BBC Micro:bit

  • This is a connector that fits directly to the edge contacts of a BBC micro:bit. The connector has 80 pins, but because of the different widths of the micro:bit edge contacts, some of the micro:bit contacts will map to more than one of this connector's pins. Also, the back half of the pins are not used at all..
  • The edge connector gives access to all the important pins on the bottom edge of the micro:bit. Check the datasheet for the pin spacing and orientation. This connector is best used with a custom PCB..
  • This breakout board for edge connectors allows intermediate and advanced users to connect micro:bit to breadboards and other sensors, motors, LEDs, etc..
  • We can use it in many ways, it is highly recommended to use our breakout board.
  • Through the breakout board, we broke through all 21 GPIO, power and ground pins in the form of 0.1"..
Check Stock

SparkFun MicroMod LoRa Function Board - 1W 915M30S LoRa Module Frequency Range: 900 - 931MHz Transmit Power 28.5 - 30dBm (max) Modulation LoRa, FSK, GFSK, MSK, GMSK, OOK Antenna Impedance: 50Ω

  • The 1W LoRa MicroMod Function Board adds LoRa capabilities to your MicroMod project. It is intended to be used in conjunction with a MicroMod processor board and a MicroMod main board, which provides the electrical interface between a processor board and the function board(s)..
  • Utilizing the 915M30S LoRa module from EBYTE, which is a 1W (30dBm) transceiver based around the SX1276 from Semtech. There is a robust edge mount RP-SMA connector for large LoRa (915MHz) antennas.
  • with modification, a U.FL connector is also available. We've successfully tested a 12 miles line-of-sight transmission with this module (user results may vary)..
  • Board Features: M.2 MicroMod Edge Interface, Keyed Screw Slots, RP-SMA Antenna Connector, Configurable U.FL Antenna Connector. MicroMod Peripherals Used: 5V Power.
  • 1W 915M30S LoRa Module Features: Based on SX1276 chipset from Semtech.
  • modulation: LoRa, FSK, GFSK, MSK, GMSK, OOK.
  • Data Rate: FSK: 1.2 - 300kbps, LoRa: 0.018 - 37.5kbps.
  • Note: A MicroMod Processor, Main Board, and antenna are not included with this MicroMod LoRa Function Board. These parts will need to be purchased separately.
Check Stock

SATA Power Cable 3 Pack SATA 15-Pin to 6-Pin PCI Express Card Power Cable Adapter 8 Inch

  • Sata Power Cable Usage: Use one of the SATA power connectors on the power supply to add a Sata 15-pin to 6-pin adapter that allows you to use the SATA power cable to power the video card inside the computer. Provides a cost-effective way to connect the PCI-E video card to the serial SATA power connector provided by the computer power supply..
  • Connector: 15-pin SATA male connector, and 6-pin female PCI Express card power adapter.
  • Cable material: 6 Pin PCI-e to SATA Power Cable 18 AWG Full Copper.
  • Standard length: The SATA power cable has an 8-inch (20 cm) long connector, and the Sata 15-pin to 6-pin adapter is ideal for internal cable management..
  • Safe connection: Connecting the SATA power cable can reduce the risk of damaging the internal connectors that are difficult to connect and unplug, and can also reduce the tension on the SATA drive or the connector of the computer motherboard.
Check Stock

Heayzoki 90 Degree Motherboard Power Connector, ATX 19/20Pin Vertical Pin Adapter Usb3.0 Motherboard Adapter for Desktop Computer Motherboard Supply

  • 【19/20 PIN CIRCUIT BOARD CONNECTION】USB 3.0 motherboard adapter, Adopts multilayer circuit board connection, the adapter has excellent performance and high working efficiency..
  • 【HIGH SPEED SIGNAL TRANSMISSION】ATX 20 pin connector, Using sophisticated production technology, the adapter has high speed USB3.0 signal lossless transmission..
  • 【FUNCTION】90 degree plug adapter, It can solve the problem that the 19p cable directly inserted into the motherboard is not thin enough to cause the motherboard pins to break.Card slot: facing outward..
  • 【CONVENIENT TO IN STALL】The 90 degree power adapter adopts USB3.0 interface, which is easy to install and can be used directly after installation..
  • 【DURABLE MATERIAL】 Made of high quality plastic materials, the adapter-computer Accessories is sturdy, durable and has a long service life..
Check Stock