Reviews Compressor Pressure Relief Valve Kit

Porter Cable FC350A/FR350A/FM350A OVERHAUL Kit # 910450

Thanks to the elbow and adapter with pre-applied thread sealant, this valve kit works on air compressors with 1/4 or 3/8 inch NPT drain valve..
The 10” braided steel hose is flexible which prevents breaking and kinks..
Featured a quarter turn drain valve, it makes draining water out of the compressor tank much easier and you don’t have to do that on your knees anymore..
Installation is simply enough and once the old peacock is removed, it will be threaded in with little difficulty..
Fittings are made of heavy duty brass which is corrosion resistant. Working Pressure: 175 PSI, Blasting Pressure: 475 PSI & Max Temperature: 200 ℉.

Adjustable Pressure: Our PCP air compressor is made of copper wire and a 1800W motor. It can produce high pressure quickly and efficiently with a maximum pressure of 4500PSI. You can preset the pressure as you need, and the machine will stop automatically when the pressure reaches..
Water Cooling: This air rifle compressor adopts a water-cooling system equipped with an LED temperature display. The perfect temperature ranges from 50℃~70℃. Once the temperature reaches 75℃, you must stop the machine and change the water. Note: The water container is not included..
Various Safeguard: The paintball compressor features an explosion-proof valve, front and side fences, providing you more security and avoiding secondary hazards caused by improper use. Attention: To avoid danger, you must use the breathing valve to replace the oil plug before running the machine..
LED Thermometer: This air compressor is equipped with an upgraded LED thermometer to monitor the temperature. Compared to the digital one, the LED display is more clear and does not require a battery. Moreover, the cylinder is made of stainless steel, which provides the machine a long lifespan..
Various Application: The filtration device of the high pressure air compressor is a water & oil separato....

Air Compressor Pressure Control Switch 4 Ports 95-125 PSI w/ 0-200 Pressure Gauge and 150 PSI Pop off valve.
Brand new Air Compressor Control Valve (95-125 PSI Pressure Switch). It is comparable to a Furnas, Square D, and many more..
he product has an On/Off switch and a unloader. It will be working on both 2 stage and single stage compressors. If your compressor does not need the unloader, you do not have to hook it up..
PRESET 95-125 PSI ¼" COMPRESSION UNLOADER VALVE ¼" FEMALE NPT TANK CONNECTION WITH 3 EXTRA 1/4" PORTS. MAX AMPS, 20 AMPS AT 120VOLT / 12 AMP AT 240 VOLT , AND 9.6 AMP AT 3PH 240 VOLT.

150 psi max tank pressure of the portable air compressor allows more air in the tank for longer tool runtimes.
2.6 SCFM @ 90 psi of the electric air compressor allows for quick compressor recovery time, per ISO1217.
6 gal Pancake style tank of the PORTER-CABLE air compressor is made for stability, includes water drain valve and rubber feet.
Low Amp 120V motor starts easily in cold weather or with extension cord.
Durable oil-free pump for long life and no maintenance.
Shroud, handle and console cover protects vital components, makes unit easier to carry and includes cord wrap.
Two regulated, factory installed air couplers to easily support two users.
13 pc accessory kit for a variety of inflation and cleaning tasks.
150 psi max tank pressure stores more air in the tank for longer tool run times.

Actron's Fuel Pressure Tester Kit works on most domestic fuel injected vehicles having a Schrader valve test port on the fuel rail.
Use on the following: Ford high pressure central fuel injection and GM, Ford, and Chrysler multi-port fuel injection - multi-port means one fuel injector per cylinder.
Tests: fuel pump check valves (leak down test), fuel pressure regulators, weak fuel pumps, fuel line integrity (clogged or damaged fuel filters), leaking injectors.
Kit includes: large easy-to-read 2-1/2 inch gauge with standard (0-100 psi) and metric (0-700kPa) scales, Ford fuel line adapter, solid brass fittings, & pressure relief valve for safe, clean testing.

Closed Flow: closed flow air chucks feature internal “check valves” that do not allow air to flow to or from the chuck unless the chuck is engaged with a tire valve stem, which makes them more efficient for using directly on an air compressor hose line, since they will not rapidly deplete the air tank unless engaged with a tire valve stem.
Easy to Use: pushed forward the sleeve to lock the valve stem and pulled back the sleeve to release the lock on air chuck, it makes things easy that you can use one hand to seal and release the chuck.
Standard Size: the top thread, 1/4 Inch FNPT.
Heavy Duty: the lock on air chuck, made of steel and zinc, can prevent rust.
The inside three claws are metal plating to protect them from oxidation.
Wide Use: the top thread is standard size 1/4 inch FNPT, fit for most tire inflator air compressor, air accessory kit, air compressor accessories, inflator gauge compressor accessories.

It can easily adjust the air compressor to control the pressure and is low power consumption..
Quality tested for maximum reliability and high performance in even the toughest environments..
The main function of the valve is to adjust the air compressor to close and start the pressure.
Users can adjust according to their actual situation..
Right red is the safety valve. The air regulator on both sides of the copper is an exhaust valve that opens the gas when used..
Dual pressure gauges can display pressure more quickly and conveniently adjust pressure.

This light-weight, compact striping machine is built tough. This Trueline Striper is perfect for those small jobs..
Comes with Air Valve and Safety Relief Valve if you have a portable Air Compressor available.
Pressure the paint tank as you would the tire of your car..
Rugged, light-weight and easy to operate.
Enclosed spray box ensures the sharpest possible line even on windy days.

Thanks to the elbow and adapter with pre-applied thread sealant, this valve kit works on air compressors with 1/4 or 3/8 inch NPT drain valve..
The 10” braided steel hose is flexible which prevents breaking and kinks..
Featured a quarter turn drain valve, it makes draining water out of the compressor tank much easier and you don’t have to do that on your knees anymore..
Installation is simply enough and once the old peacock is removed, it will be threaded in with little difficulty..
Fittings are made of heavy duty brass which is corrosion resistant. Working Pressure: 175 PSI, Blasting Pressure: 475 PSI & Max Temperature: 200 ℉.