Reviews Compression Pipes And Fittings

Legines Brass Pipe Fitting Long Nipple, 1/8' NPT Male x 1/8' NPT Male Extender Straight Connector, 1-1/2'Length 1200psi (Pack of 5)

  • Long nipple for connecting two threaded pipes and extending pipe length.
  • 1/8" Male National Pipe Taper (NPT) threads for connecting to 1/8" female threaded pipes.
  • Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
  • Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

NIBCO U4810 11/2 HXHXH 45 WYE PVC White, 1.5 Inch

  • Wye with three openings for connecting and branching three pipes.
  • Hub ends for connecting to male unthreaded pipes or fittings.
  • PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.Lead Free.
  • Meets specifications ASTM D2665 and D3311 for quality assurance.
Check Stock

NA Black Hydra Krimp 71500 AC Hose Crimper

  • The lightweight hand-held hydraulic press is very portable..
  • Crimping pipes and fittings in an easy and labor-saving way..
  • The kit is applicable for beadlocking fitting and barrier A/C hose..
  • The dies snap quickly into the press fixture requiring no pins or screws..
  • Wide Application: The hydraulic crimper is ideal for shop and field operations, crimping pipes and fittings in an easy and labor-saving way. Customize....
Check Stock

Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool

  • 【No Damage To Walls & Copper & Supply Lines】This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
  • 【Easy & Fast Remove】1.Remove the ....
Check Stock

NIBCO C4804 2 HXMIPT MALE ADAPTER PVC, White, 2' (C48042)

  • Adapter for connecting pipes or fittings of different types.
  • Hub opening on one end and male National Pipe Taper (NPT) threads on the other for connecting two pipes with different ends.
  • PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.
  • Meets specifications ASTM D2665 and D3311 for quality assurance.
Check Stock

Spears 406-020 PVC Pipe Fitting, 90 Degree Elbow, Schedule 40, White, 2' Socket (Pack of 5)

  • Elbow for connecting two pipes or fittings at a 90-degree angle.
  • Socket ends for connecting two unthreaded pipes or fittings.
  • PVC for chemical and corrosion resistance, strength, and light weight.
  • Maximum operating temperature of 140 degrees F.
  • Meets ASTM D1784 and D2466 standards for quality assurance.
Check Stock

Spears 829 Series PVC Pipe Fitting, Coupling, Schedule 80, 1-1/4" Socket

  • Coupling for connecting two pipes with the same diameter in a straight run.
  • Socket ends for connecting to male pipes or fittings.
  • PVC for chemical and corrosion resistance, high strength, and less weight than fittings made from metal.
  • Maximum operating temperature of 140 degrees F.
  • Meets ASTM D1784 and D2467 standards for quality assurance, and certified by NSF International for potable water service.
Check Stock

NIBCO - K09825CA C4811 2 HXHXH SANITARY TEE PVC, White, 2 Inch (C48112)

  • Tee with three openings for connecting and branching three pipes.
  • Hub ends for connecting to male unthreaded pipes or fittings.
  • PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.
  • Meets specifications ASTM D2665 and D3311 for quality assurance.
Check Stock

Spears 461 Series PVC Pipe Fitting, Adapter, Schedule 40, 2' NPT Male x 2' Spigot

  • Adapter for connecting pipes or fittings of different types.
  • Male NPT threads on one end and spigot connection on the other for connecting two pipes with different ends.
  • PVC for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.
  • Meets NSF/ANSI 61 Annex G, NSF/ANSI 372 for quality assurance.
Check Stock