Reviews Complete Window Regulator

Professional Portable Oxygen Acetylene Oxy Welding Cutting Torch Kit W/Gas Tank Torch Cutting and Welding Portable Kit

  • General Maintenance Work - Extremely Popular General Maintenance Work, Automotive Repair, Metal Sculpture, Air Conditioning, Refrigeration etc..
  • Ideal Use - For iron or steel welding, braze-welding, plus brazing, cutting, bending & forming..
  • Waterproof Storage Compartment - Carrier is made of tough, lightweight polypropylene.
  • Regulator Type - Rear entry regulators for better balance on the small cylinders Oxygen Regulator Type: (CGA540) Acetylene regulator Type: (CGA200)..
  • Complete Set - Compatible gas-welding accessory kit includes a 20cu. ft oxygen tank and 10cu. ft acetylene tank with regulators, along with full brass torch assembly..
Check Stock

KAX 741-655 Power Window Regulator and Motor Assembly Front Left Driver Side Original Equipment Replacement Compatible with C1500 C2500 K1500 K2500 Suburban Blazer Yukon Tahoe K3500 C3500HD C3500

  • [ENSURE THE KAX WINDOW REGULATOR FITS YOUR VEHICLE] - Make sure that the part fits your exact vehicle, please check the plug & fitment notes & filter system & description for accurate information..
  • [KAX OE REPLACEMENT WINDOW REGULATOR] - Location: Front Left Driver Side. Replace Part Number: 741-655, 22071949..
  • [COMPATIBLE MODEL] -Fits C1500 1988-1999/C1500 Suburban 1992-1999/C2500 1988-2000/C2500 Suburban 1992-1999/C3500 1988-2000/C3500HD 1991-2002/K1500 1988-1999/K1500 Suburban 1992-1999/K2500 1988-2000/K2500 Suburban 1992-1999/K3500 1988-2000/Tahoe 1995-2000/Yukon 1992-2000/Blazer 1992-1994..
  • [EASY TO INSTALL] - You can install this adjuster component without special tools, which only takes around 30 - 50 minutes..
  • [QUALITY CERTIFICATION] - Durability and life cycle tested to meet or exceed OEM. After through thousands of cycles in the actual door for extensive testing to ensure long-term trouble-free service life..
Check Stock

Dorman 751-739 Front Driver Side Power Window Regulator And Motor Assembly Compatible with Select Chevrolet Models (OE FIX)

  • Improved replacement - this motor and regulator assembly features enhancements over the original design for greater reliability.
  • Failure-resistant design - incorporates redesigned window slide block for significantly greater durability than the original equipment design.
  • Simple replacement - no special tools are required to install this regulator assembly.
  • Quality engineering - this part was redesigned for greater durability using finite element analysis, in-door cycle testing and proprietary slide block compression testing.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Paddsun 12V Universal Power Window Switch Kit Set with Wiring Harness + Switch Holder for 2 Doors

  • Suitable for window regulator, is designed to be mounted on door panels..
  • Switch holder(for 2 switches):38.2*28.3*25.5mm.
  • Each switch is be with illumination green ligth.
Check Stock

A-Premium Power Window Lift Motor Compatible with Buick LeSabre Pontiac Grand Am 1999-2005 Bonneville Oldsmobile Alero 1999-2004 Aurora 2001-2003

  • 【Directly Fit】OE Replacement 2 Pins Terminal window motor directly fit.
  • 【Pefect Fitment 1】Compatible with Buick LeSabre Pontiac Bonneville 2000-2005 (with Valeo Unit).
  • Compatible with Oldsmobile Aurora 2001-2003 ---Front Left or Rear Right.
  • 【Pefect Fitment 2】Compatible with Oldsmobile Alero 1999-2004.
  • Compatible with Pontiac Grand Am 1999-2005---Front Right Passenger Side.
  • 【Premium Quality】Made by premium copper and high strength steel, durable window regulator motor.
  • With the powerful center, the performance of window motors is more reliable. These will help your save both money and time in the long run.
  • 【Reference Number】12481874, 12481876, 22702136, 742-129 (Special Note: For LeSabre and Bonneville models, it only fit the window motor with Valeo unit..
Check Stock

G Francis Keg with Keg Regulator and Beer Dispenser, 128 oz – Portable Keg Draft Beer Dispenser, Portable Beer Dispenser

  • ...ps contaminants out, carbonation in, eliminates foam, and preserves coldness longer than breakable glass growler alternatives.
  • EASY TO USE: Assembly required and instructions included.
  • Remove cap, screw on top tap (with foam blocker in tab) on mini keg, screw in a 16 gram CO2 cartridge (not included), turn the flow regulator to your desired PSI, pull the tap, and let the beer flow into your glass.
  • When done for the night, simply turn the regulator off, leave the mini keg pressurized to preserve the beer and prevent it from going flat, and place in fridge or cooler.
  • PACKAGE CONTENTS: Mini beer keg with regulator and dispenser kit comes complete with a spear body, crossbar, twist tube, pressure relief ring, nut, white flow-control block, faucet, faucet knob, regulator, regulator base, regulator knob, gauge, and beer hose.
  • 16g CO2 capsule and CO2 cartridges not included.
  • For best results, use beverage grade CO2 cartridges (not all CO2 cartridges are made to be suitable for beverages).
  • Included O-rings are extras, not for initial assembly.
Check Stock

Injector Pressure Regulator Valve - IPR Valve - Compatible with Ford Trucks - Powerstroke 6.0L Diesel - E-350, Excursion, F-250, F-350 Super Duty - Replaces 5C3Z9C968CA, CM-5126, 5C3Z-9C968CA, AP63417

  • Replacement Injector Pressure Regulator Valve - regulates the oil bypass circuit of the high pressure oil pump. It is an electromagnetic valve that opens and closes to allow high pressure oil into the injectors. This enables the PCM to control fuel delivery by increasing the speed in which the IPR valve operates thus, being a critical component in your vehicle system..
  • Compatible Replacement for Ford 6.0L Vehicles - 2005 E350 Club Wagon | 2005 - 2010 E350 Super Duty | 2005 Excursion | 2005, 2006, 2007 F250 Super Duty | 2005, 2006, 2007 F350 Super Duty |. The injector pressure regulator valve can be located after removing the intake and the fuel filter housing above the engine which can be seen attached to the high pressure oil pump (HPOP)..
  • Replaces Part# 5C3Z9C968CA, 1846057C1, CM-5126, 5C3Z-9C968-CA, AP63417 - commonly found on popular F-250, F-350 Super Duty, E-350 and Excursion models with 6.0L V8 Diesel Powerstoke Engines including years 05, 06, 07, 08, 09, 10. If you are experiencing no or hard starting when the engine is hot or after stalling and usually starts when it is cold or your vehicle is idling erratically or jerking then you may have a problem with your IPR valve..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, this inj....
Check Stock

Smelting Pot

  • All In All: The complete set covers all of the basics, includes Furnace, burner, gas hose with regulator, 6KG crucible, fire pad, tongs, PTFE tape, manual, worry-free 12-month warranty, technical support 24 hrs..
  • No Rust At All: Heavy Duty stainless steel 304 furnace body, Anti-rust, corrosion resistance, durable..
  • Reach High Temperatures Quickly: Heavy Duty stainless steel 304 gas burner offers 135,000 BTU output, heat up to 2600°F/1426°C, melt copper wire in 15 minutes..
  • Pro Heat Insulation: Built-in ceramic fiber heat insulation Thickness up to 25mm, Excellent heat insulation effect..
  • Safety: Come with CSA gas hose and 30 psi regulator, professional design for working with America standard Propane Tank directly, Easy to use.(It does not work with BBQ low pressure gas tank fitting).
Check Stock

Primula Burke Cold Brew Coffee Maker 1.6 Qt Capacity

  • ADJUSTABLE PRESSURE REGULATOR: Features a stout creamer faucet w/ adjustable pressure regulator where cold-brew coffee infused w/ nitrogen gas is released creating a creamy, stout-like effect just like brewed coffee at your local coffee shop.
  • SMOOTH & RICHER COFFEE: The Nitro Cold Brew Coffee Maker is designed after stout beer dispenser that creates a super-smooth, rich body w/ foamy top similar to your favorite draught beer. Enjoy a frothy iced coffee w/o the need of creamer or sweetener.
  • 64 OZ. CAPACITY: The nitro keg coffee growler features a 64 oz. standard liquid volume capacity which is similar to those traditional beer growlers. Total size measures 7.3” x 7.5” x 14.2” inches and easily fits in your home fridge or mini kegerator.
  • STAINLESS STEEL: The nitro cold brew at home is constructed w/ food grade rust-proof stainless steel w/ black powder coating. Its stainless steel construction keeps your beverage cold for a longer period of time, and is easy to assemble, fill & clean.
  • COMPLETE BREWING KIT: Includes stout faucet, spear w/ pressure-relieving valve 75PSI, N20/N2 cartridge holder, tap handle, CO2 regulator w/ 100PSI range, silicone hose & O-ring set. Hexagonal screw cap is made easy to grip. Ideal for parties/camping.
Check Stock