Geekworm Raspberry Pi Zero 2 W 18650 UPS Expansion Board X306 & USB HUB for Raspberry Pi Zero 2W/Zero W(Not Include Raspberry Pi)

  • 【Compatibility】Compatible with Raspberry Pi Zero 2 W & Pi Zero W, NOT support Raspberry Pi Zero..
  • 【One-Cell 18650 UPS HAT】Ideal Uninterruptible Power Supply (UPS) solution for Raspberry Pi Zero W/2W, Max 5.1V 4000mA Power Backup with 18650 single cell battery holder.
  • 【3-Port USB HUB】On-board three USB 2.0 Ports.
  • Gain 3 USB2.0, downstream ports which offer High-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps).
  • 【How to Power】Power via USB Type-C 5V Power In port of X306.
  • (Recommend to use Geekworm UL listed 20W 5V 4A USB Type-C power adapter (ASIN:B09J856PND) ).
  • 【Cooling Solution】Recommend to use with C296 aluminum heatsink(ASIN: B09QMBCXLB) for Raspberry Pi Zero 2 W. C296 also compatible with Raspberry Pi Zero W by using thermal pads of different thicknesses..
  • 【Packing List】1 x X306 V1.1 Expansion Board.
  • Note: not inlcude Raspberry Pi board,18650 battery, GPIO Header & power adapter..
  • 【User Manual】Installation guide and user manual refer to Geekworm WiKi search X306..
Check Stock

RETROFLAG PiStation CASE, Raspberry Pi 4 Case with 800x480 Pixel 4.3 inch LCD Monitor Display Screen, Stereo Speaker, Cooling Fan and 3pcs Heatsinks for Raspberry Pi 4 Model/Pi 4B (Pi 4 Case)

  • 【Raspberry Pi Monitor】 Retroflag PSOne Pi 4 CASE is upgraded version, specifically designed for Raspberry Pi 4 Model B, NOT compatible with other Raspberry Pi model. 4.3 inch Raspberry Pi monitor equipped with IPS screen and HD 800x480 pixel high resolution..
  • 【Safe Shutdown and Reset】 This is Retroflag Pi 4 CASE version with Safe Shutdown and Safe Reset function. It will be more safe for your SD card when shutdown and reset..
  • 【Easy to Assemble & Access】 Pi 4 CASE offers your Raspberry pi good protection with ONLY few steps to assemble, you can access to all ports of Raspberry Pi 4 Model B, such as power, audio, USB, LAN, MicroSD Card Storage, and Micro HDMI connector without opening the CASE..
  • 【Original PS One Console Style】We created this RETROFLAG Pi 4 case applying the most iconic element in the retro game world as a homage to the most classic console ever made, this Pi 4 case can make your Raspberry Pi 4B become a NES retro gaming machine in one second! Designed the CD-ROM drive for storing your SD cards in the appearance of a game cartridge..
  • 【Strong Heat Dissipation】RETROFLAG Pi 4 Case is equipped with a quiet cooling fan and 3pcs heatsink with better heat dissipation, could prevent system failure and Raspberry Pi 4B from o....
Check Stock

RETROFLAG NESPi 4 CASE, Raspberry Pi 4 Case with SSD CASE, HDMI Cable & Cooling Fan & Heatsinks for Raspberry Pi 4 Model/Pi 4B (Pi 4 Case)

  • 【Compatible With】 Retroflag NESPi 4 CASE is upgraded version, specifically designed for Raspberry Pi 4 Model B, NOT compatible with other Raspberry Pi model. The old version uses large fan for cooling, it is affect the operation of the case..
  • 【Safe Shutdown and Reset】 This is NESPi 4 CASE version with Safe Shutdown and Safe Reset function. It will be more safe for your SD card when shutdown and reset..
  • 【Easy to Assemble & Access】 NESPi4 CASE offers your Raspberry pi good protection with ONLY few steps to assemble, you can access to all ports of Raspberry Pi 4 Model B computer, such as power, audio, USB, LAN, MicroSD Card Storage, and Micro HDMI connector without opening the CASE. Also this NESPi 4 Case comes with NES Cartridge style case for 2.5'' SSD, easy to install your SSD, enjoy an overall better computer experience!.
  • 【NES Style】We created this RETROFLAG Pi 4 case applying the most iconic element in the retro game world as a homage to the most classic console ever made, this NesPi 4 case can make your Raspberry Pi 4B become a NES retro gaming machine in one second!.
  • 【Strong Heat Dissipation】RETROFLAG Pi 4 Case is equipped with a quiet cooling fan and 2 heatsink with better heat dissipation, could prevent system failure and Raspbe....
Check Stock

Geekworm Raspberry Pi Hdmi in Module, Hdmi to CSI-2 C790, Hdmi Input TC358743 Supports up to 1080p60fps Video & Audio Supported Compatible with Raspberry Pi 4B/3B+/3B/Pi Zero/W/2W/CM4

  • 【Overview】This C790 Hdmi to CSI module takes the incoming HDMI signal and converts it into a separate CSI signal&I2S audio signal. ( Raspberry Pi 4 and Pi ZeRo only support 2 lan, max 1080P@50fps, and CM4 can support 4 lan, max 1080P@60fps).
  • 【Compatibility】Compatible with Raspberry Pi 4 Model B, Raspberry Pi 3 Model B+/3B, Raspberry Pi 3 Model A+, Raspberry Pi 2 Model B,Raspberry Pi 1 Model B+, Raspberry Pi Zero/Zero W/Zero 2W, Raspberry Pi CM4/CM3 with IO board..
  • HDMI Input: supports up to 1080P60Hz on Raspberry Pi.
  • 【Packing List】: ✔1 x HDMI to CSI-2 Module C790 ✔1 x FPC 15pin 1.0mm cable(15cm length) ✔1 x FPC 22pin 0.5mm cable(15cm length) ✔1 x I2S cable (15cm length).
  • 【User manual】Refer to our WiKi search C790..
Check Stock

GeeekPi Raspberry Pi 4 Aluminum Heatsink with PWM Controllable Fan, Raspberry Pi 4 Armor Lite Heatsink with PWM Speed Control Fan for Raspberry Pi 4 Model B

  • Compatible with Raspberry Pi 4 Model B --- This Armor Lite Aluminum Heatsink is only designed for Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Version..
  • Support PWM Speed Control --- Different from ordinary fans, this cooling fan supports PWM speed regulation, which is perfectly compatible with Raspberry Pi OS..
  • Good Heat Dissipation Effect --- With 3510 ultra-quiet cooling fan and thermal pads, it can lower the temperature of Raspberry Pi Board quickly..
  • Lightweight and Easy to Install --- With screwdriver and 2pcs screws, it's easy to fix the heatsinks with Raspberry Pi Board..
Check Stock

RASPIAUDIO Audio DAC Hat Sound Card Audio+V2 for Raspberry PI4 All Models Pi Zero / Pi3 / Pi3B / Pi3B+ / Pi2 / Better Quality Than USB

  • The Audio+ V2 works with Raspberry Pi 4 or Raspberry Pi Zero version 2..
  • The Audio+ V2 works with previous version of Raspberry pi 3 and 2 or Raspberry Pi Zero version 1..
  • The Audio+ V2 is fully compatible with the Audio+ V1..
  • The Audio+ V2 is now using a very high quality no noise dac 112dB Audio Stereo DAC with 32-bit 384kHz PCM..
  • Compatible with VOLUMIO / Raspberry pi OS / Retropie / Mopidy.
Check Stock

Vilros Raspberry Pi Zero- Zero W Compatible Case (Black)

  • Features 3 Covers, Sealed Open GPIO and Camera Module Compatible.
  • Includes a 40mm Raspberry Pi Zero / Pi Zero W Compatible Camera Cable and 2×20-pin Strip Dual Male Header.
  • Case ONLY Does NOT include Raspberry Pi Board Or Cables.
Check Stock

Dorhea for Raspberry Pi 3 b+ Display 3.5 inch TFT LCD Screen Kit, 3.5'' 480x320 Resolution TFT Touch Screen Moudle with Protective Case Touch Pen Heatsinks for Raspberry Pi 3 B+,Pi 3 B, Pi 2, Pi Zero

  • 3.5 inch HD touch screen designed for Raspberry Pi 3B 2B/B+/A+ /A/B Zero, 320*480 resolution, better display with TFT LCD Display touch screen panel, No external power supply needed.
  • Raspberry Pi Case : Protective case design for Raspberry Pi 2 model B and Raspberry Pi 3 model B,protects your raspberry from scratches and damage, this case is easy to install and has good ventilation.
  • Copper & Aluminum Heatsink : 3 Copper & Aluminum heatsinks make sure your pi works stable,size perfectly matched with paspberry pi ,heatsink to cooling down CPU ,LAN ,VRAM, VGA, RAM, IC Chips, MOSFET SCR, Southbridge ,Northbridge etc.
  • Compatible With : Suitable for Raspberry Pi 3 Model B+,Raspberry Pi 3 Model B, Pi 2 Model B & Pi Model B+ . Access to all controls and features.
Check Stock

UCTRONICS Raspberry Pi Cluster Case, Desktop Metal Rack Case, 4 Layers with 2 Cooling Fans Compatible with Raspberry Pi 4B and 2.5\ SSD

  • For All Raspberry Pi B Models: The metal enclosure is designed for Raspberry Pi and is compatible with Raspberry Pi 4B+/3B/3B+/2B/B+.
  • Supporting up to 4 2.5" SSDs (7mm thickness) and 4 Pi installations.
  • it allows you to add additional storage to your Raspberry Pi whenever and wherever you want, making it easy to build Raspberry Pi clusters and Raspberry Pi NAS servers. Please note that the thickness of a 2.5" SSD cannot exceed 7mm..
  • Side Opening Design: you can easily position the Raspberry Pi HDMI, audio, and power supply. Each layer is 40mm/4.57inch high, there is enough space for you to install 4 mini PoE hats and raspberry pi PoE+hat..
  • Made of metal aluminum, Size: 4.13*4.84*7.12inch.
  • the case is strong and durable, compact and lightweight. So you can easily place it anywhere on your desk. An SD card slot is reserved in the mounting bracket, which can be accessed from the front of the case using an SD card adapter (Asin: B09CKRDFTH). 4 additional screw holes on the top of the enclosure for stacking..
  • Easy to install: The case is not pre-assembled and requires simple installation once you get it in your hands. Each mounting plate uses M4 hand screws, making it easy to remove and install one of the units without a screwdriver..
Check Stock