Reviews Compact Push in Fitting

mistcooling 160PSI Misting Pump (220 V-AC)

  • Specs: 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push- lock fitting..
  • Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle..
  • Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings..
  • Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75 degree F - UV Resistant Flexible Tubing - Black Color - UV Treated..
Check Stock

Utah Pneumatic Push To Connect Air Line Fittings 1/4'Od Union Straight Tube Connector Air Fittings Quick Connect Push Lock Fittings Air Bag Fittings Pneumatic Tube Fittings Plated Brass Push (5 Pack)

  • SPECIFICATION: Acceptable Fluid : Air And Water Pressure Range: Max Working Pressure: 2mpa | 290psi/ Working Temperature:-20°C—120°C | -4°F—248°F Applicable Tube: PU/NYLON/Soft PE Hose Push Connect Air Fittings Push Fitting.
  • Installation : push to connect fittings can be done within a short period of time. This tube connector is available in various styles and models Each model to serve its purpose All models of push in connector are designed to suit your pneumatic piping needs perfectly.
  • Thinking of changing the tube direction after installation ? .Be relaxed . You can easily change the tubing connector direction even after installation. The release ring conforms with the ellipse design to ensure that the disconnecting unit is in good shape.
  • It's important to note the taper threads on each fitting are properly coated with Teflon for optimal performance of the entire plumbing system.All push to fit, contains internal hexagonal holes.
  • this enhances the installation of the push connect fittings process in a narrow space.
  • These Push In Fittings Meet The Pressures And Temperatures Mentioned. Our Connect Push Brass Is More Resistant To High Temperatures We Are Ready To Serve You And Answer Any Questions Related To Our Straight Air We Are Committed To....
Check Stock

SIEMENS Q120 20-Amp Single Pole Type QP Circuit Breaker,Black

  • ...circuit breaker manual reset: 5 AMP, 10 AMP, 15 AMP, 20 AMP, 30 AMP (each circuit breaker with waterproof transparent cover, 2 pcs each size), 20 pcs Quick Connect Terminals, totally 30 pcs..
  • 【Circuit Protection】Made of durable and premium plastic with rust-resistance and corrosion-resistance, long service life. Compact design enables high density circuit protection configurations.The mounts in 3/8 inch(10m m) round hole, fitting for one push button circuit breaker. High and low temperature resistance,suitable for -40 ℃ to 85 ℃. The operation up to 32 volts DC or 250 volts AC..
  • 【Huge Function on Your Home】When overload , the switch reset button will pop up automatically to cut off the circuit, which plays a role in protecting the line.Easy to reset, simply press the reset switch to use it again after a disconnect over a period of time. Huge function but simple operation, provide you a safe home or work place..
  • 【Equipped with Practical Accessories】Our circuit breaker with a waterproof button cap to protect provide high-strength circuit protection in bad weather, extending the service time. Coming with quick terminal for connection of the wires, ONE step to use..
  • 【Widely Application】Suitable for many applications.Widely used in househol....
Check Stock

Lemoy 1/4 OD Quick Connect Push In to Connect Water Tube Fitting for RO Reverse Osmosis Water Filter Fittings Pack of 30

  • Easy to use,Mini quick connect push tee 1/4-Inch OD.
  • Push fit fittings,Quick Connect Fitting 1/4" RO Water System.
  • Standard fitting for water filter systems using 6mm water filter tubing.
Check Stock

Aluminum Track Tiedown Fitting 5,000 lb. Capacity Tiedowns 8-Pack

  • This listing is for eight (8) double stud fittings with a RATED CAPACITY* of 5,000 lbs. The W.L.L.** (working load limit) is a 1,666 lb. capacity. This fitting fits all aluminum track that is similar to the track shown in the secondary image above. We refer to the track as aluminum load track. It is also commonly referred to as airplane track, seat or simply S track..
  • RATED CAPACITY: Also known as assembly capacity or break strength is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is new. **W.L.L. The maximum load weight a tie-down should be subjected to during normal use. To assist in making the proper tie-down choice the Federal D.O.T. requires the W.L.L. to be 1/3 of the Rated Capacity..
  • The fitting is SPRING LOADED to permit simple attach and detach operation. To detach, simply pull up on the spring loaded mechanism and then slide forward or back and the fitting releases. To attach, rest the fitting in the load track, then push down on the base and push forward..
  • Double stud refers to the number of "fingers" that it captures when attached to the aluminum track. Base measures 2-1/2" long x 7/8" wide. 1/4" thick steel "O" ring measures 2" in diameter, large enough and plenty strong enough ....
Check Stock

Zler Upright Walker for Seniors Stand Up Rollator Walker with Seat and Big Wheels Folding Walker Back Erect Rolling Mobility Walking Aid with Backrest Padded Armrests for Elderly Seniors Gray

  • 【Quality Materials and Comfortable Seat】Zler armrest walker for seniors is made by the highest medical standards of Rollator. 18.5(L) x 9(D) x....
  • 【Flexible Front Wheels and Ergonomic Hand Brakes】 Zler Rollator Walker has the hand brakes that push forward to slow or stop. With the 8" and....
  • 【Straight Back and Stable Walking】 Comfortable padded armrest is 43.5"-50" high. Suitable for 5-6.5ft people.With the comfortable pad wraps around....
  • 【Compact Design and Easily Folding】The compact design of rollator walker is easy for storage,fitting in the trunk of a car or cabinet. One hand....
  • 【Quality-assured and Nice Service】 100% tested before leaving the factory, and 24-hour friendly email customer service..
Check Stock

EVIL ENERGY Fuel Filter Regulator 58 PSI Kit for LS Swap EFI Conversion

  • ...uel pressure regulator filter used to create a returnless fuel supply for LS engine swaps and electronic fuel injection conversions. This bypass regulator passes excess fuel back into the tank so the pump can run freely..
  • Feature: The fuel filter regulator with 6AN adpater fittings for LS Swap delivers 58 PSI (4 BAR) to your fuel rail and returns unused gas to the tank, and build-in a 10 micron fuel filter ensures clean fuel is delivered to your engine, thus to protect the normal operation of the engine, reduce wear, avoid blocking, improve the purpose of engine life..
  • Compatible with: The fuel filter pressure regulator compatible with Chevrolet 1999-2014 V8 5.3L/325 Chevy small block Gen III/IV (LS-based engines), Chevrolet 1999-2014 V8 4.8L/294 Chevy small block Gen III/IV (LS-based engines), Chevrolet 1999-2014 V8 6.0L/364 Chevy small block Gen III/IV (LS-based engines). Please you check the part is your need before purchase..
  • Installation: fuel filter regulator kit for LS Swap EFI Conversion can be installed anywhere between the tank and the engine, although it is usually installed in the engine compartment to make....
Check Stock

Dixon Valve & Coupling 270AT Tool for Push-On Fitting, 13-1/2\ Length x 2-3/8\ Width x 7\ Height

  • Cuts push-on style hose and inserts the fitting.
  • Built-in cutter slices through 1/4" - 3/4" ID reinforced push-on hose without fraying.
  • Clamp hose into tool's vice and apply light pressure on handle to drive in the fitting.
  • Tool has four 7/16" diameter mounting holes for bench mounting.
  • Measures 13-1/2" length by 2-3/8" width by 7" height.
Check Stock

Sharkbite Disconnect Tongs all three U711, U713 & U715

  • Sharkbite Disconnect Tongs all three U711, U713 & U715.
  • Allows for easy removal of Universal brass push-to-connect fitting from pipe.
  • Used to remove a tube from a SharkBite push-fit fitting.
  • Easy to use and very fast to Disconnect with this tool.
Check Stock