Reviews Compact Dc Motor

Makita 9557PB 4-1/2\ Paddle Switch Angle Grinder, with AC/DC Switch

  • Powerful 7.5 AMP motor delivers 11,000 RPM for high output power.
  • Compact design with small 2-1/2" diameter barrel and weighs only 4.5 lbs. for added comfort.
  • Labyrinth construction seals and protects the drive gear and bearings from contamination for longer tool life.
  • Lock-on/off feature for continuous operation.
  • AC/DC switch for use with alternative power source.
  • 4-1/2-inch angle grinder with paddle switch seals motor and bearings from contamination.
  • 7.5 amp motor delivers a no-load speed of 10,000 RPM.
  • Small circumference barrel grip for improved handling.
  • Includes grinding wheel, wrench, side handle, flange and wheel guard.
Check Stock

Forward and Reverse Relay Module for Motor/Linear Actuator, Reversing Relay Module (DC 12V)

  • Reversing relay module. Powers any reversing motor equipment, can be used for any application that requires the ability to reverse motion.
  • Support Momentary-action(Self-resetting) switch and Alternate-action (Self-holding) switch. For Self-resetting switch, when the switch is pressed the motor operates, and when the switch is released the motor stops..
  • Compact plastic case and wires connect for easy mount..
  • Forward and Reverse status indicating LED, forward status lighting red, reverse lighting green. When the control switch is not turned on, the module does not consume electric energy..
  • Rated current 10 Amp, Operating Voltage: 10 ~ 15V DC..
Check Stock

DC Motor Speed Controller AC 110V Input DC 24V-90V Output Motor Speed Controller Switch Electric Speed Regulator for Permanent Magnet DC Motor 400W DC-51

  • High Precision:Motor speed controller 36V has small size, high precision, wide speed controlling range, low power consumption and long service life.
  • Size: 11.2 × 10 × 6cm/4.4 × 3.9 × 2.3inch.
  • Single Phase Controller:This DC motor speed controller 24V is only suitable for the motor below 1800rpm. A single-phase asynchronous motor speed controller and can be used for 24V, 36V, 90V DC motors. Input Voltage: AC 110V.
  • Wide Application:Adjustable DC motor speed controller 90V can be widely used for speed governing device drivers of packaging, printing, electronics, instrument meter, clothing machinery, medical machinery and other industries.
  • High Quality Circuit Board:This motor speed controller 24V uses high quality electronic circuit and integrated components, sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
  • Fast To Respond:DC motor speed controller is used with single-phase asynchronous motor to realize feedback constant speed and stepless speed regulation. It feels smooth and has good durability.
Check Stock

High Speed Brushless DC Motor Kits 2000W 60V Electric Gokart Motor 4250RPM Rated Mid Motors with Controller Pedal Throttle for E-Scooter E-Bike Dirt Bike Motorcycle

  • Fundamental Parameters: This brushless go kart motor is powerful and efficient.Input Voltage: 72V DC, Output Power: 3000W, Rated Current: 43A, Rated Speed: 4900 RPM, Maximum Speed: 5800 RPM, Sprocket: T8F-11T, Maximum Current: 65A. Rated Torque: 6 N.m / 849.67 oz.in, Shaft Diameter: 0.47'' / 12 mm, Length (no Shaft): 5.31'' / 135 mm, Length (with Shaft): 6.3'' / 160 mm. Package includes: 1 x Brushless DC Motor, 1 x Controller, 1 x Multi-purpose Wrench, 1 x L-Shaped Wrench, 1 x Screw Set..
  • 3000W Brushless Motor: The dc electric go kart brushless motor adopts a 100% copper core for low noise operation and excellent speed regulating performance. The high-precision rotor features high-tech components, a clean finish for water resistance, and high working efficiency. Get ready to leave the competition in the dust..
  • Sturdy Aluminum Construction: The electric brushless dc motor kit features an aluminum alloy shell that resists heat, cold, and deformation, ensuring it will not rust easily. This dc electric motor is a forward and backward rotation motor so that you can switch rotation gears effortlessly..
  • Speed Controller Included: This dc electric motor brushless comes with a controller to provide speed control at a desirable range, speed adjustment method: Pot....
Check Stock

PWM DC Motor Speed Controller, DC10-55V/40A Max 60A Stepless DC Motor Speed Controller with Forward-Brake-Reverse Switch Adjustable Potentiometer and LED Display,Continuous Current 40A

  • ...egulate Range】 Input supply voltage: DC 10V-55V.
  • Control frequency: 15KHZ.Please connect the DC power supply to use! Do not continue to use excessive load, the continuous current is 40A, and the peak value is 60A..
  • 【Switch Function】The PWM DC motor speed controller come with switch function. High power speed controller switch which is much more adaptable and conveniently change the motor direction..
  • 【Excellent Heat Dissipation Performance】 The enclosure of the speed controller for motor is an aluminum enclosure. Aluminum shell is very strong to prevent damage, holes on its side and top which are helpful for heat dissipation..
  • 【Easy to Operate】The stepless motor controller has a simple potentiometer knob adjusts the motor speed from 0% ~ 100% smoothly. And with LED display is accurate to show 0 ~ 100% of the motor speed. The input voltage of PWM motor speed controller should be equal to the rated voltage of the motor within 10-55V,or it will be burnt.Do not reverse the positive and negative poles！.
  • 【Application】 The dc motor driver can be used to brush motor speed regulation, light dimming regulation in the DC circuit.Note: The motor cannot be used in electric vehicle....
Check Stock

DORHEA PWM DC Motor Speed Controller DC 10-55V 24V 36V 48V 60A Stepless Motor Speed Controller with Adjustable Potentiometer Forward-Brake-Reverse Switch and LED Digital Display DC Brush Motor

  • Motor speed controller input supply voltage: DC 10V-55V.
  • The motor speed controller is an aluminum case, very strong to prevent damage, holes on its side and top which are helpful for heat dissipation..
  • The pmw dc motor speed controller come with switch function. High power speed controller switch which is much more adaptable and conveniently change the motor direction..
  • The stepless motor knob adjusts the motor speed from 0% ~ 100% smoothly with LED display is accurate to show 0 ~ 100% of the motor speed..
  • The input voltage of PWM motor speed controller should be equal to the rated voltage of the motor within 10-55V,or it will be burnt, the dc motor driver can be used to brush motor speed regulation, light dimming regulation in the DC circuit.Note: The motor cannot be used in electric vehicles..
Check Stock

Antrader 4020 40x40x20mm 12V DC Brushless Radial Cooling Turbo Blower Fan for DIY 3D Printer Extruder Humidifier 3-Pack

  • 40 x 40 x 20mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.5.
  • High quality mini brushless 4020 DC 12V fan, sleeve-bearing design cooling cooler..
  • Plastic construction fan. Dual Ball Bearing.
  • DC Brushless Cooling Fan, Rated Voltage: DC 12V, Current: 0.23A.
  • Compact motor design for computer case 40mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
Check Stock

Onyehn DC Motor PWM Speed Controller3V 6V 12V 24V 35V Speed Control Switch Mini LED Dimmer 5A 90W(Pack of 2pcs)

  • Mini Style DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM)..
  • Mini DC 6-35V 5A PWM Motor Speed Controller. Wide voltage DC motor speed controller, PWM duty cycle: 1% -100%..
  • Default disconnection of short circuit point, suitable for 5-35V input. Manually connect the short circuit point according your needs, suitable for low power 3-15v input..
  • By screwing the potentiometer, you can turn off power supply output. High voltage and high current resettable fuse, overcurrent automatic disconnection, power off for cooling for a few seconds fuses automatic recovery..
  • It is not only to use for dc motor controls of the speed,but also to use for adjust the LED light..
Check Stock

3 Axis CNC Kit Nema23 Stepper Motor Dual Shaft 425oz-in 112mm 3A & Driver 40VDC 4A 128 microstep for CNC Router Milling Engraving Machine

  • ♞【Product】3 Axis nema23 stepper motor driver usbcnc controller kit.
  • ♞【Nema 23 Stepper Motor】 Nema 23 Stepper Motor / Holding Torque: 425oz-in,280Ncm / Motor Size:57x57x112mm / Phase:2 / 4pcs lead wire / 1.8 Step.
  • ♞【Stepper Motor Driver】FMD2740C Stepper Motor Driver / 4Amps / Support voltages:12 to 50V DC / 128microstep.
  • ♞【4 Axis USBCNC breakout board】 Come with Hand Control with USB Cable / Only support USBCNC software / input voltage: 15-36V DC..
  • ♞【DC Power Supply】400W 36V 11A DC Switching power supply.
Check Stock