Reviews Collar Barbed Fittings

ABN Fuel Injection Pressure Test Kit – Comprehensive Universal Set with Improved Flex Hoses, Fittings, and Instructions

...nd pressure release valve fitting with long drain hose to prevent inadvertent discharge of fuel while testing and to allow for safe recovery of fuel.
Fuel injection pressure gauge displays reading 0-100 PSI and 0 to 7 Bar.
FITS YOUR VEHICLE: Automotive fuel pressure test kit adapters fuel gauge kit has all necessary fittings to attach to a pressurized system.
Will work on any vehicle as long as it has a Schrader test port fuel injection system or as long as you can splice an inline connection.
Recommended for older low-pressure systems with mechanical fuel pumps.
Not compatible with Bosch, CIS-Jetronic, or GM throttle body systems.
EASY STORAGE: Heavy-duty 2.3” x 12.8” x 11” inch (5.8cm x 32.5cm x 27.9cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization of each component of this fuel injection pressure kit.
PACKAGE CONTENTS: Fuel tester kit gas pressure test gauge package is a comprehensive kit of adapters and fittings.
Comes with flex hoses, fittings, and instructions for quick reference.
Includes Brass 1/8"-27 NPTx1/4"-18NPT, Brass 1/4" Barbed x 1/4"-18NPT, Aluminum 1/4" & 3/8 Barbed x 1/8-24NPT, 3 Rubber Hoses 1/4" x 2.5" L, 3/8" x 3.0" L.

PACKAGE INCLUDES: Includes in a pack 10 pcs end plug barbed connectors, approximately 1.7” or 40mm long. Drip irrigation barded suitable for 1/2 Inch irrigation tubing..
STRONG MATERIAL: This end plug is made of high grade plastic which is strong and good for both indoor and outdoor use..
EASY INSTALLATION: Connect irrigation tubing by simply insert this barbed connector at the ends of the tube. No tools or glue required. Push the tube firmly into the irrigation barbed to avoid leakage. Soften the end of tube with blower if you find the tube is too stiff before inserting..
WIDE APPLICATIONS: These irrigation fittings are essential for watering system, drip system and sprinkle system in vegetable gardens, flower beds, greenhouse and patio. Use irrigation barbed to build yourself a minimal maintenance watering system, save water and energy..
COME WITH STORAGE BAG: Barded connectors are packed into a plastic bag for easy storage..

DURABLE: Resistant to chemicals and fertilizers commonly used in landscaping.
EASTY TO USE: Flexible tubing for easy installation - Attach to 1/2" Drip tubing with 1/4" barbed fittings.
OPERATING PRESSURE (PREVENT LEAKS & BLOWOUTS): 10-25 PSI (Minimum of 150 mesh filtration).
EMITTERS: Flow regulated, self flushing inline emitters deliver equal flow at a wide range of operating pressures.

【PERFECT MATCH 1/4 INCH IRRIGATION TUBING】JOYPRO 1/4 inch irrigation elbow fittings can connect to most of the standard 1/4" drip irrigation tubing. (Note: Please check the size of tubing carefully before purchasing.).
【MADE OF DURABLE PLASTIC MATERIAL】JORPRO drip line elbows are made of high quality engineering plastics, so our irrigation elbow connectors are durable, strong, water resistant, chemical-resistant and long-lasting than others..
【EASY TO INSTALL】It is easy to install without any glue, tools or clamps. Directly insert this irrigation tubing elbow at the ends of the water pipe, the barbed ends can grab 1/4" tubing tightly for a secure leak-proof connection..
【PACKAGE LIST】It comes with 60 pieces barbed elbow connectors, which let you connect your irrigation systems as you wish..
【WIDE APPLICATION】These elbow fittings for 1/4 inch sprinkler hose is ideal for garden, flower bed, greenhouse, farm, lawn, patio and other agricultural watering system..

Resistant to chemicals and fertilizers commonly used in landscaping.
Flow regulated, self flushing inline emitters deliver equal flow at a wide range of operating pressures.
Attach to 1/2" Drip tubing with 1/4" barbed fittings.

【Package Included】 8 pieces Plastic barb connector in total, including 2pcs 3/16" x 3/16", 2pcs 1/2" x 1/2", 2pcs 5/8" x 5/8", 1pcs 1/4" x 1/4", 1pcs 3/8" x 3/8".
【Material】 Barbed hose fittings made of 100% PP polypropylene plastic that is durable, strong, water resistant, chemical-resistant materials to assure long life.
【Working Temperature & Pressure】 The plastic hose fittings temperature range from -9 °F to 175 °F, but hose splicer is not resistant to oil.
【Easy Installation】 Barb hose easy to install without glue, or other tools required. Barbed ends grab 5/8" tubing tightly that won't leak.
If necessary, you can use a heat gun or blower to soften the end of the tube before inserting it, after cooling, the tube will remain tight.
【Wide Application】 Pipe connectors Suitable for applications in pharmaceutical, food and beverage, laboratory, chemical processing and others.

Included fittings: three-0.75“ Barbed x 0.75“ Threaded, two-0.5“ Barbed x 0.75“ Threaded and Nozzle x 0.75“ Threaded.
Suitable for installation on dry land for in-line use or submersibly into the water.
Suitable for use in hydroponic systems, ponds,fresh and saltwater aquariums, fountains and filter systems.

FIT: Use With 1/4" Fittings - 6 inches pre-inserted emitter spacing, 1/2 GPH flow rate from each emitter, 100 feet Length.
DURABLE: Resistant to chemicals and fertilizers commonly used in landscaping.
EASTY TO USE: Flexible tubing for easy installation - Attach to 1/2" Drip tubing with 1/4" barbed fittings.
OPERATING PRESSURE (PREVENT LEAKS & BLOWOUTS): 10-25 PSI (Minimum of 150 mesh filtration).
EMITTERS: Flow regulated, self flushing inline emitters deliver equal flow at a wide range of operating pressures.

SAVE TIME AND EFFORT: This plant watering kit has everything you need to get started with drip irrigation and precisely water up to twenty individual plants.
Use the kit to build, expand, or repair a drip irrigation system.
INSTALL IN 3 EASY STEPS: 1) Connect timer and tubing to water source.
Customizable system for your garden's potted plants, hanging baskets, or planter beds.
IDEAL FOR ANY LEVEL GARDENER: Easy to customize, install, and operate.
Kits contain all the components you need to set up your own drip system.
EASY TO CONNECT: screw threaded ends together.
push barbed ends on fittings and emitters into tubing opening.
KIT INCLUDES: Water timer, 75 ft. of 1/4 in. supply tubing with 3/4 in. FHT adapter, 20 PC drippers, tubing hold-down clamps, barbed couplings, elbows, and tees.