Reviews Cold rolled Steel Pipe

Aluminum Tape 2 inch x 65 Feet Foil Tape 3.9 mil Insulation Adhesive Metal Tape High Temperature Heavy Duty HVAC Tape Silver Tape Aluminum Foil Tape for Ductwork Dryer Vent HVAC

  • ...aves you time. Paste more firmly, tear off more easily, leave no trace without residual glue..
  • MULTI-PURPOSE: Aluminum foil tape is suitable for smooth flat and irregular surfaces. It is generally used for sealing hot and cold air ducts (excellent HVAC duct tape), pipe insulation systems, sealing aluminum, stainless steel and plastic joints/joints, temporary repair of metal surfaces, copper pipe fixing, etc. Extensive applicability to meet your daily needs..
  • WHAT YOU GET: 1 Roll aluminum tape (2 inches x 65 feet), our 7*24 friendly customer services for peace of mind..
Check Stock

Heavy Duty Tube Cutter with a Extra Blade, Sharp Rigid Tubing Cutter Cuts Up to 1/8-2\ Galvanized Pipe, Copper and Iron Pipe, Metal Pipe Cutter Tool Great for Plumbers or Metal-workers - by Godora

  • 【Good Helper】Godora heavy duty pipe cutter is made of high quality steel, durable and perfect for pipe use, loved by professional plumbers all over the world and is their right hand man..
  • 【Perfect Cutting】High quality steel ball thrust bearing feed mechanism can increase the cutting speed, precise rolling control makes the rotation smooth and accurate, with sharp cutter head let you get flat, clean and burr-free straight cutting..
  • 【Widely Used】Our tube cutter can easily cut 1/8-2" inches of iron pipe, galvanized pipe and other different materials, perfect for plumbing, automotive, heating repair, construction sites and DIY applications..
  • 【Simple & Efficient】Place the pipe, adjust the position and rotate the tubing cutter, cutting pipes has never been easier. The extra-long handle provides support to apply the required force, saving labor while increasing cutting efficiency..
  • 【100% Satisfaction Guarantee】Each metal pipe cutter is rigorously tested to ensure higher quality, extra cutter wheels help you get more out of the tool and ensure maximum uptime. Please buy with confidence, we have a professional product development team to support all your applications to ensure your 100% satisfaction..
Check Stock

Happybuy PEX Pipe 2 Rolls of 1/2 Inch X 100 Feet Flexible Water Pipe Tubing Potable Water Pex Tubing

  • Material: Cross-Linked Polyethylene Pipe.
  • Minimum Bending Radius: 5″ (Industry Standard For 1/2″ PEX).
  • Pressure Ratings: 80 psi @ 200F, 100 psi @ 180F, 160 psi @ 73F By PPI.
  • Maximum Working Pressure (Psi) : 0.86 MPa/Year.
  • ADVANTAGES: PEX plumbing pipe is cost-effective, flexible, durable and easy to install, making it a popular choice VS. copper and CPVC piping.
  • HOT/COLD POTABLE WATER DISTRIBUTION SYSTEMS: Non-Barrier type PEX tubing is designed for use in hot and cold potable water distribution systems in residential, commercial and manufactured housing applications.
  • OPEN-LOOP HYDRONIC HEATING APPLICATIONS: The PEX tube is also suitable for continuous hot water recirculation and for use in open-loop hydronic applications.
Check Stock

OUTDOOR WIND 10x20 Canopy Tent Outdoor Gazebo Canopy Wedding Party Tent with Sandbags

  • [Spacious and Ventilated] 10 x 20 feet, enough space to accommodate a lot of people. Equipped with a total of two 3-panel church windows (fully transparent 10 silk thickness) and two zippered roll-up doors that can be pulled up to protect against the wind when it is cold.
  • [Product material and accessories]The top cloth is made of 100G PE new material.
  • the walls are made of 90G PE new material.
  • the steel pipe is the surface is white sprayed, with 12 ground stakes and 6 ropes, 6 small sandbags.
  • [Multiple Uses] Party tents are perfect for weddings, parties, conferences, camping and more. Ideal for banquet parties, family dinners and BBQ camping, great for getting together with friends.
  • [Note]: This party tent is for temporary use and is not suitable for all weather.Please dismantle and store after use.
  • [EASY TO ASSEMBLE]The party tent is easy to assemble. You’d better to have an assistant to help, no additional tools of the canopy tent are required, just keep the frame steady when assemble the wedding tent steel tube and cover..
Check Stock

VEVOR Pipe Stand, Pipe Jack Stands with Casters Adjustable Height 28-52 Inch, V Head Pipe Stand 882 LB, Folding Portable Pipe Stands 1/8 to 12 Inch Pipe Supporting, Steel Jack Stand

  • Adjustable Construction: The height of this pipe jack stand is adjustable (from 28"/71 cm to 52"/131 cm) to meet different needs. Durable V-head supports the pipe of 1/8 to 12 inches/0.32 to 30.48 cm..
  • Heavy Duty V-head: The pipe stand is constructed of premium steel, rust- and corrosion-proof, durable for a long time. The lock washer ensures security and large capacity. Max lifting weight can reach up to 882lbs / 400 kg..
  • Portable & Compact Design: The whole jack stand is folding. Storage won't take your much space. It also includes casters and meets your needs if you need to move your tool-easy carry and storage..
  • Great Stability: The foot pads of this V-head pipe stand are widened. The strut tension plate features superior lateral support. Stability is enhanced when you are working in an uneven place..
  • Wide Application: Welding of heavy pipes, shapes, solids, and rounds. This welding pipe stand supports pipe during pipe threading, pipe hole cutting, roll grooving, etc..
Check Stock

RKI 4" - Professional Backdraft Damper Inline Spring Loaded for Dryer Duct

  • A tight sealing and fastening of the duct is achieved by the rubber strip attached to the outside of the draft blocker damper. The rubber seal prevents loud rattling when the flap blades open and close. The housing of the flap is made of galvanized steel, the flap blades are made of aluminum, the axle and spring are made of stainless steel.
  • Designed for use in AC, dryers, exhaust, extractor or range hoods, heating systems, vents and other residential, commercial and industrial HVAC applications.
  • FUNCTIONALITY: Duct draft stopper prevent cold air or wind from entering the ventilation pipe. In this case, the flap is installed in such a way that the flap leaves only open into the outgoing air direction. This means that no (cold) air / wind can penetrate the ventilation pipe from the outside..
  • INSTALLATION: The backflow Preventer valve is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies t....
Check Stock

Meshscreen Pellet Smoker Tube 6 inches - 5 Hours of Billowing Smoke，Stainless Steel Pellet Smoker Tube for All Grill or Smoker for Cold/Hot Smoking,with 2 S Shape Hooks+1 Cleaning Brush

  • Good applicability:This smoke pipe for gas grill is suitable for any grill (gas, electric or charcoal) and smoker. It adds the aroma you want to your....
  • Lasts 5 hours:All you need to do is add your favorite wood pellets (apple, pecan, hickory, mesquite, oak, cherry, etc.) to the smoker tube for pellet....
  • Hexagon Design : The design is conducive to the stability of the smoking pipe, making the smoking pipe not easy to fall, and more beautiful and with a....
  • Cold or hot smoked：Pellet smokers can be used with cold smoked cheese and nuts, or hot smoked ham, steak, fish, chicken, pork, fruit, corn, bacon....
  • High quality 304 steel :High-quality smoking pipes are made of 304 steel, which is safe, durable, and easy to clean, rust-proof and heat-resistant,....
Check Stock

MATEWORK Pipe Cutter - Fast Tubing Cutter Set with Mini Cutter & Deburring Tool Pipe Cutter Tool for Cutting 3/16 to 2 Aluminum Copper PVC Stainless Steel Tube for Plumber and Home Working 3PCS

  • 【Perfect Set】The set includes a heavy duty tube cutter, mini tubing cutter and an inner-outer reamer. It can not only meet your pipe cutting need, but also fast clean inner reaming and outer deburring needs. The pipe cutting tool is very suitable for cutting pipes of aluminum, copper, PVC, thin stainless steel tube..
  • 【Exquisite Craftsmanship】MATEWORK professional heavy duty pipe cutter is made of high-quality aluminum alloy & SKD steel with high hardness up to HRC52. It has 6 pieces of individual bearings allowing for increasing cutting speed. Precise rolling control makes every cut smoother and more accurate in pipe cutting. After many tests, the cutting capacity up to 3/16 to 2-inch outside diameter with the thickness of 1/6-inch..
  • 【Meet Your Needs At Any Time】Mini tubing cutter is Specially designed for small diameter tubes in confined spaces, cut through 1/8 to 7/8-inch outside diameter pipes with a maximum thickness of 1/10-inch especially for use in restricted areas where a complete turn is not possible, improve your work efficiency..
  • 【Deburring Tool】Pipe reamer has 3/16 to 1-5/16 inch outside diameter capacity. It can be quickly, cleanly and conveniently applied to the inner diameters of copper, aluminum, PVC and soft ste....
Check Stock

1/2inch Rigid Pipe Strap Clamp, Two Hole Strap,U Bracket Tube Clip, Stainless Steel Heavy Duty Pipe Fasten Holder, 50Pcs (20mm)

  • This Clamps accommodates 20mm (1/2") pipe and has 2 holes to secure it in place. Suitable for holding various pipes or rods like PVC. The screw hole diameter is 4mm (0.15")..
  • Made of 304 stainless steel, with 0.6mm rigid thickness, the pipe clamps are highly resistant to corrosion and rust, strong, durable and sturdy..
  • Use in pipe fixing on various surfaces and support structures, great for fixed pipeline with oil, water, gas medium in metallurgy, petroleum, chemicals, vehicles, ships, power hydraulic systems..
  • These u shape clamps are strong enough to hold your pipe or rod securely. Reinforced steel for extra strength..
  • Only need to cooperate with screws can be installed, convenient and fast, resistance to heat up and cold shrink, the surface is polished, anti-oxidation, long-term service..
Check Stock