Reviews Cnc Laser Cutter

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

  • Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V.
  • Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
  • 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
  • CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma....
Check Stock

Fiber Cutter Stable Performance High Automatic Blade Return Lightweight Fiber Cutter (Orange)

  • Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
  • High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
  • Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do term use..
  • Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
  • Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..
Check Stock

SCULPFUN S30 Pro Laser Engraver with Auto-Controlled Air Assist System, 84W Laser Engraving Cutting Machine, 10W Optical Power Laser Cutter for Home Family DIY, Ultra-Thin Carving (S30 Pro Engraver)

  • ...ttern that appears in ordinary engraving machines..
  • ▶【Industrial-grade One Pass Cutting Accuracy】 - S30 Pro laser cutting machine can easily cut 0-15mm wood and 0-12mm acrylic at one pass with 10W advanced laser power. What's more, supported by air assist system and 32-bit air-assist motherboard, the S30 laser cutter can achieve automatic air-assist control and finer edge cutting, which greatly enhances its cutting speed and cutting quality. The 10W laser of S30 CNC router is suitable for frequent cutting, do everything faster..
  • ▶【Replaceable Lens & Expandable Engraving Area】 - S30 Pro laser carver adopts innovative replaceable lens, which greatly improves the service life of the laser, which is more than 10 times longer than other general lasers. When the lens is exhausted, the lens can be replaced. Besides, the primitive engraving area is 410x400mm, but you can buy a Y-axis or XY-axis expansion kit to expand the engraving area to 935x400mm or 935x905mm, which can offer you larger area for engraving or cutting work..
Check Stock

ATOMSTACK A20 PRO Laser Engraver, 130W Laser Engraving Cutting Machine with Air Assist Kits, 20W Output Power 0.08 * 0.1mm Compressed Spot, Laser Cutter and Engraver Machine for Metal Steel

  • 【Get a free laser honeycomb table】Order an Atomstack A20 PRO laser engraver from Beruna Direct, click on "Available promotions" and then select "Add to cart" to enjoy buy one get one free. If you order an Atomstack A20 PRO laser cutter on your mobile phone, click on "Special offers for this item" and you will receive a free 380 mm x 284 mm laser honeycomb table..
  • THICKEST CUTS BY 20W HIGHEST LASER POWER: Atomstack A20 Pro laser cutting machine is the world's first 20W optical power diode laser engraver. With the latest generation of four 6W laser coupling technology, it can cut off 15-20mm thick tungsten board as well as the 8-15mm thick black acrylic board with only ONE PASS, and even cut the 0.05mm thick stainless steel sheet..
  • MORE PRECISE ENGRAVING: Atomstack laser cutting & engraving machine with a 32-bit motherboard works more smoothly and stable. The advanced built-in 256-bit color scale with 0.08 * 0.1mm laser spot area makes the engraved pattern more contrast and more obvious. The finished pattern is like sketching on paper. the effect is more delicate and natural in the overlay of black and white..
  • SMARTER ENGRAVING & CUTTING: The ATOMSTACK APP is connected to the A20 pro laser cutting machine and supports both Android and Apple phone syst....
Check Stock

Fiber Cutter, Fiber Cleaver Aluminum Alloy Tungsten Steel ABS Unbreakable Portable High Accuracy for Net Installation

  • Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..
  • Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
  • Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
  • High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
  • Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do long term use..
Check Stock

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

  • Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
  • High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
  • Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
  • High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
  • Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

ORTUR Laser Master 3 with Foldable Feet, App Control 10W Laser Engraver and Cutter Machine, Laser Engraving Machine for Wood and Metal, Laser Spot 0.05x0.1mm, Engraving Area 400x400mm

  • ...Its cutting penetration and accuracy are twice of ordinary lasers which can cut 20mm pine board and 30mm acrylic sheet. 0.05*0.1mm ultra-thin square compressed spot makes the engraving effect more refined and outstanding..
  • [Faster Speed Laser Engraving Machine]: This Laser Cutter uses the latest upgraded 11th Generation of Laser Motherboard and the V2.0 Series Smart Laser Firmware. The 10W laser module comes with Integrated Air Assist, Dual Fans, and Foldable Focal Gauge all in only 235g Weight, which can work very well at a high speed of 20000mm/min under precision engraving and high-energy cutting, saving you over half the time as other similar brands..
  • [ALL-Metal Structure and Folding Design]: OLM3 Laser cutter is made of aluminum alloy, the modular structure is convenient for users to assemble quickly. The foldable feet use a more stable tilting structure, more durable high-quality aluminum alloy materials, and it is more convenient to use without multiple disassemblies. Perfect compatible with Ortur Rotary Roller to explore unlimited possibilities..
  • [Wide Compatibility and Connections]: ORTUR Laser Engraver is compatib....
Check Stock

Fiber Cleaver, Aluminum Alloy, Tungsten Steel, ABS, Stable Performance, Fiber Cutter, High, Low Error, Light Weight for Maintenance (Black)

  • High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
  • Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
  • Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
  • Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do long term use..
  • Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..
Check Stock

Fiber Cleaver, Aluminum Alloy, Tungsten Steel, ABS, Stable Performance, Fiber Cutter, High, Low Error, Light Weight for Maintenance (Orange)

  • High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
  • Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
  • Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
  • Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do long term use..
  • Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..
Check Stock