PULSAR 6.4 Turbo Rebuild Kit Billet Compressor Wheel Combo
- 5 Axis CNC milled, machined from Solid, make more aggressive blades design possible.Spool up faster, Lower EGTs and More Boost!.
- High quality CNC machined brass thrust bearings enhances turbochargers durability.
- Upgrade heavy duty twin hydrodynamic journal bearings extend the turbo service life.
- Both heat shields added to this kit compare to other kit on the market.
- Fits 2008-2010 Ford 6.4 F250 F350 F450 F550 compound turbo.
Check Stock
ANNOYTOOLS ARM 32-bit 3-Axis CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling DRV8825 Standalone Driver,Support 500W Spindle/NEMA17/23 Stepper Motor/Laser Module
- Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
- Input voltage: 12-24VDC .CNC Router Machine Controller board.
- Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
- support 775 motor, 200W/300W/500W spindle.
- support dual Y-axis use, three-axis and two-axis switching use.
- support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
- Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
- Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
- Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check StockHailege MACH3 Engraving Machine CNC 5 Axis Stepper Motor Driver Interface Board with Optocoupler Isolation Blue Board + USB Cable
- Fully support MACH3 and other computer software controlled by parallel.
- MACH3 Engraving Machine CNC 5 Axis Stepper Motor Driver.
- Open all 17 ports. Can be connected with optocoupler drive and can control the 5-axis stepper motor..
Check Stock
Baltic Birch Plywood, 3 mm 1/8 x 12 x 8 Inch Craft Wood, Box of 8 B/BB Grade Baltic Birch Sheets, Perfect for Laser, CNC Cutting and Wood Burning, by Woodpeckers
- THE WORLD’S FIRST WALL MOUNTED CNC MACHINE KIT: its upright design provides a huge cutting space - up to 32sq ft - on a tiny footprint. By eliminating the heavy and expensive components of traditional CNC milling machines, the M2 becomes a purpose-built, making machine without all the added fuss. It cuts sheets of nearly any material such as wood, metals, plastic and foam, so that you can craft anything you like. Projects made with our M2 include benches, signs, lamps, tables, and even a guitar!.
- FULL KIT: M2 is a 3-Axis wall-mounted CNC cutting machine and comes with laser-cut, steel and powder coated mounting brackets, lead screw z-axis, built-in dust collection port, three ⅛‘’ router bits that offer extremely precise cuts. The router is not included. Compatible routers include: DeWalt611, Bosch Colt, Makita RT0700CX and EU equivalents to each of the above..
- OPEN-SOURCE SOFTWARE: The M2 is designed to be used with Makerverse open-source software which is included with your purchase. Makerverse is a GRBL CNC control application that has custom controls made specifically for all Maker Made products: the Maslow, M2 and 300x. The application is derived from the open source CNCjs project and will continue to receive new features and updates f....
Check Stock
M2 CNC Engraving Machine Kit, First Wall Mounted Highly Accurate Cutting Engraver, 3-Axis CNC Machine for Wood, Metal, Plastic & More, Up to 4x8ft Working Area, Based on Maslow CNC Design
- THE WORLD’S FIRST WALL MOUNTED CNC MACHINE KIT: its upright design provides a huge cutting space - up to 32sq ft - on a tiny footprint. By eliminating the heavy and expensive components of traditional CNC milling machines, the M2 becomes a purpose-built, making machine without all the added fuss. It cuts sheets of nearly any material such as wood, metals, plastic and foam, so that you can craft anything you like. Projects made with our M2 include benches, signs, lamps, tables, and even a guitar!.
- FULL KIT: M2 is a 3-Axis wall-mounted CNC cutting machine and comes with laser-cut, steel and powder coated mounting brackets, lead screw z-axis, built-in dust collection port, three ⅛‘’ router bits that offer extremely precise cuts. The router is not included. Compatible routers include: DeWalt611, Bosch Colt, Makita RT0700CX and EU equivalents to each of the above..
- OPEN-SOURCE SOFTWARE: The M2 is designed to be used with Makerverse open-source software which is included with your purchase. Makerverse is a GRBL CNC control application that has custom controls made specifically for all Maker Made products: the Maslow, M2 and 300x. The application is derived from the open source CNCjs project and will continue to receive new features and updates f....
Check StockCentroid 4 axis Acorn DIY CNC motion controller kit REV 4 with CNC software replaces MachMotion,WinCNC,Mach3,EMC2,KCAM4,Smooth Stepper
- ♞【Upgrade Version CNC3018 Pro Max】Mini CNC machine small size, light weight, USB interface, GRBL control systems, great cnc router machine for....
- Type:USB port Desktop cnc router【System requirements】Windows XP / Win 7 / Win 8 / Win 10 /....
- ♞【Upgraded GRBL1.1 Control Board】Added the outer casing,emergency stop button port,tool setting (probe) port,X/Y/Z axis limit port and add the....
- ♞【Main application】Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copper and aluminum and other....
- ♞【GRBL Software】Our parcel include a 4G USB flash drive,it include the installation instructions,user manual and GRBL software.
Check StockCNC Rotary Table Axis, Rotary Indexer Table Axis,4th 5th Axis,Table size 100 125mm,Power Milling Machines Accessesaries
- ★Dimensions -- CNC Router Rotary Table Product Size：440 * 150 * 160mm..
- ★Ratio -- 4th axis reduction ratio: 8:1 ,5th axis reduction ratio:6:1..
- ★Features -- High concentricity and high conversion rate..
- ★Stable -- Precise positioning and stable control..
- ★Durable -- Wear resistance, long service life.Not easy to oxidize, not easy to rust..
Check Stock
Digi-Pas 2-AXIS ULTRA-Precision Digital Level 1-acrsec (0.005mm/M), Inclinometer, DWL8500XY + PRO Software (NIST-Traceable)
- ...'bubble' level position in-between tiny graduation lines is NOW THINGS OF THE PAST. Digi-Pas SMART LEVEL greatly CUT-DOWN precision alignment TIME (by >70%) and in combine with one-man operability allow GREAT COST SAVING as well as improve QUALITY of installation, setup & maintenance of large-sized CNC machines, XY-Table Ball-Screw STRAIGHTNESS & SURFACE FLATNESS and equipment requiring delicate alignments or sensitive to vibration..
- Real-time MONITORING and LOGGING (save in Excel) on leveling states, planar angles, 3D straightness/surface-flatness profiling and VIBRATION amplitudes. ANALYSIS on both static & dynamic positional stability of an alignment-sensitive equipment. Unlike those CONVENTIONAL pendulum single-axis level technology, Digi-Pas industrial-grade MEMS technology can withstand HIGH SHOCK resistant accommodating ROUGH handling. USER SELF-CALIBRATION function included..
- RESOLUTION: 1-arcsecond (0.005mm/M). Measurement range: 0 ~ ±14,000 arcsec. (1-Axis).
- 0 ~ ±7,200 arcsec. (2-Axis). Accuracy: ± 1-arcsecond from 0 to ±1,080arcsec. Bluetooth range >150ft (Industrial CLASS 1). Operating Temp.: 50～104°F. PC Sync Pro Softw....
Check Stock
CNCTOPBAOS Upgrade CNC 3018 Pro 3 Axis DIY Mini CNC Router Kit with GRBL Remote Control Offline Controller PVC PCB Acrylic Plastic Wood Cutting Engraving Carving Milling Machine
- ♞【Upgrade Version 3018 Pro with Offline Controller】Mini CNC machine small size, light weight, USB interface, GRBL control systems, great cnc router machine for beginers.
- you can operate this machine without connect the computer.
- offline controller included a SD card reader to write into the root directory G-code files or NC file.
- Support manually adjust X, Y, Z axis location as engraving starting point,manually open or close spindle..
- ♞【Main Feature】 Working area:30x18x4.5cm.
- Type: USB Port Desktop cnc router/Spindle: 775 spindle motor (12-36V) 24V:10000rpm/ Stepper Motor: Nema17 stepper motor,1.3A, phase resistance 2.1 ohms, torque 0.25N.m.
- ♞【Upgraded GRBL1.1 Control Board】Added the outer casing,emergency stop button port,tool setting (probe) port,X/Y/Z axis limit port and add the power button switch,and come with the fan port to force heat dissipation,with enhanced spindle drive,can support maximum 20000rpm spindle,and also can support 0.5W-20W module..
- ♞【Main application】Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copp....
Check Stock 
