Reviews Clevis Cotter Pin

US Cargo Control Clevis Grab Hook - 3/8 Inch G70 Chain Clevis Hook - Easily Secure Heavy Loads to A Truck Or Flatbed Trailer - 6,600 Pound Working Load Limit - 4 Pack

  • HEAVY DUTY CHAIN GRAB HOOK - This high-quality clevis grab hook is made of forged steel, is heat-treated, and coated with a yellow zinc chromate finish so it can survive even the toughest conditions..
  • EASY TO USE - The shallow throat opening allows for easy and secure connections with 3/8 inch Grade 70 chain. The cotter pin can be easily removed when needed..
  • STANDARD GRADE 70 HOOK - These grab hooks for chains are made specifically for 3/8" Grade 70 transport chain and should never be used for overhead lifting applications..
  • CLEAR IDENTIFICATION - All US Cargo Control standard grade 70 hooks and fittings are manufactured with a gold or yellow chromate finish for quick identification, along with the grade indication embossed on the surface..
  • SPECS - 3/8 inch Clevis Grab Hook | Grade 70 | Forged Steel | Yellow Zinc Chromate Finish | Product Weight: 1.1 lbs. | 6,600 lbs. working load limit | NOT FOR OVERHEAD LIFTING | Quantity: 4 Clevis Grab Hooks.
Check Stock

ALPS OutdoorZ Coyote Brown, Regular

  • Durable Ripstop fabric withstands heavy use and harsh hunting environments. Top loading, spindrift collar with draw cord secures main compartment..
  • Organize your gear in one of many pockets: main pocket, side spotting scope pocket, two hinged side accessory pockets, front pockets and waist belt pouches.
  • Detach pack bag and use the frame to haul out meat with a unique, secure lashing system.
  • Anodized cotter and clevis pin design for easy adjustability.
  • Hydration compatible, lower door access for main pocket, drop-down rifle holder pocket, webbing loops for lashing.
  • Standard Waist Belt Range: 26” – 40”.
Check Stock

Premier Stainless Solutions Open-Body Stainless Steel Jaw & Jaw 3/8” x 4-1/2” Turnbuckles for Tensioning Cable or Rope, T316 Marine Grade

  • MANY APPLICATIONS – Helps tension anything from rope to steel cable..
  • SECURE PINS – Jaws on each end allow easy connection to eyes with a clevis pin and cotter pin..
  • STRENGTH – These precision cast AISI316 turnbuckles offer extreme strength for their sizes..
  • RELIABILITY – The highest grade of stainless in the US market, preventing worry about corrosion..
  • CABLE ADD-ONS – Premier Stainless cable (sold separately) allows for a one-stop rigging shop..
Check Stock

3/8 Inch Clevis Slip Hook, 2Pack Heavy Duty Forged G70 Hook with Safety Latch （ Capacity18000 lbs ） for Truck Trailer Transport Tow Chain Hook

  • ...lloy chain. Widely used in trailers, flatbed trailers, truck, crane, tractor, transport tow winch hook trailer, etc..
  • Easy to Use: The shallow throat opening allows for easy and secure connections with 3/8 inch Grade 70 chain. The cotter pin can be easily removed when needed..
  • Reliable Strength: Our grade 70 3/8 inch Clevis Hooks are With high-strength, forged steel construction and precision heat treatment, load is secured by Grade 70 clevis hooks with the higher working load limit than lower grade hooks..
  • Provide Security: Be offering superior tensile strength, resistance to abrasion. This Clevis slip hooks have a smooth surface and no burrs. They are made of high-strength materials. After high temperature forging and heat treatment, the material density is increased, the tensile strength is increased, and the product is safer..
  • Corrosion-Resistant:To suit the environment it's used in. They are salt tested up to 96 hours with durable galvanized blue-white galvanized plus sealer It resists rain, dirt, snow, mud and other corrosive elements. It can increase long-lasting use and reliable strength..
Check Stock

Kuryakyn 9063 Motorcycle Foot Controls: Standard Forward Control Kit for 1991-2017 Harley-Davidson Dyna Motorcycles, Chrome

  • ...t Containing: (1) Shift Arm Retainer for ‘06-up Dyna, (1) #8-32 x 3/16” Setscrew, (1) Anti-Seize Packet, (2) 5/16”-24 Nylock Nut, (2) Ball Joints, (4) 3/8-16 x 1” Flat Socket Cap Screws, (1) 5/16-18 x 1/2 Hex Head Cap Screw, (1) Cotter Pin, Steel, 1/16 x 1”, (1) 0.256 x 0.406 x 0.030 Flat Washer, (1) 1” Clevis Pin, (1) Anti-Rattle Clip, Rubber Coated, (1) Female Clevis, 3/8-24 Internal Thread. Suggested Tools (not included): Set of Hex Wrenches, Set of Combination Wrenches, Socket Set and Ratchet, Needle Nose Pliers, Small Flat Tip Screwdriver, Vice Grip or Large Pliers, Torque Wrench (FT/LBS) and Hex Bit Socket Set, Blue and Red Loctite.
  • Compatible with Harley: '91-'17 Dyna Models (except '12-'16 FLD Dyna Switchback) Harley Note: Not compatible with most engine guards or with stock exhaust on '08-'17 FXDF, '09-'10 FXDFSE, '10-'17 FXDWG or '14-'17 FXDL.
Check Stock

TARAZON CNC Billet Forward Controls Footpegs for Harley Davidson Dyna Street Bob FXDB 2006-2017/ Low Rider FXDL 2000-2017/ Super Glide FXDC 2000-2017

  • ...t Containing: (1) Shift Arm Retainer for ‘06-up Dyna, (1) #8-32 x 3/16” Setscrew, (1) Anti-Seize Packet, (2) 5/16”-24 Nylock Nut, (2) Ball Joints, (4) 3/8-16 x 1” Flat Socket Cap Screws, (1) 5/16-18 x 1/2 Hex Head Cap Screw, (1) Cotter Pin, Steel, 1/16 x 1”, (1) 0.256 x 0.406 x 0.030 Flat Washer, (1) 1” Clevis Pin, (1) Anti-Rattle Clip, Rubber Coated, (1) Female Clevis, 3/8-24 Internal Thread. Suggested Tools (not included): Set of Hex Wrenches, Set of Combination Wrenches, Socket Set and Ratchet, Needle Nose Pliers, Small Flat Tip Screwdriver, Vice Grip or Large Pliers, Torque Wrench (FT/LBS) and Hex Bit Socket Set, Blue and Red Loctite.
  • Compatible with Harley: '91-'17 Dyna Models (except '12-'16 FLD Dyna Switchback) Harley Note: Not compatible with most engine guards or with stock exhaust on '08-'17 FXDF, '09-'10 FXDFSE, '10-'17 FXDWG or '14-'17 FXDL.
Check Stock

4Pack Clevis Slip Hook 5/16 Inch Clevis Safety Hook with Safety Latch Heavy Duty Forged G70 Chain Hook for Truck Trailer Winch Transport Tow Chain Hook,3/4 in Opening,14,000 Lb Capacity

  • Reliable Strength: Our grade 70 5/16 inch Clevis Hooks are With high-strength, forged steel construction and precision heat treatment, load is secured by Grade 70 clevis hooks with the higher working load limit than lower grade hooks..
  • Easy to Use: The shallow throat opening allows for easy and secure connections with 5/16 inch Grade 70 chain. The cotter pin can be easily removed when needed..
  • Provide Security: Be offering superior tensile strength, resistance to abrasion. This Clevis slip hooks have a smooth surface and no burrs. They are made of high-strength materials. After high temperature forging and heat treatment, the material density is increased, the tensile strength is increased, and the product is safer..
  • Corrosion-Resistant:To suit the environment it's used in. They are salt tested up to 96 hours with durable galvanized blue-white galvanized plus sealer It resists rain, dirt, snow, mud and other corrosive elements. It can increase long-lasting use and reliable strength..
  • Wide Application: These chain hooks with latch are ideal for attaching heavy duty safety chains or securing transport binder chains. They can meet requirements in transport and alloy chain. Widely used in trailers, flatbed trailers, truck, crane, tractor, transport tow winch....
Check Stock

Chamberlain 41A5250 Garage Door Opener Drive Belt Genuine Original Equipment Manufacturer (OEM) Part

  • GARAGE DOOR OPENER BRACKET - Ideal garage door parts included in this bundle: 1 garage door replacement bracket, 1 clevis pin, 1 cotter pin and 3 self tapping sheet metal screws/fasteners. Installation instructions are included..
  • GENIE GARAGE DOOR PARTS - This garage door parts bracket is used to attach the curved door arm, straight door arm and carriage assembly to the garage door. This bracket allows the operator to open and close the garage door..
  • GARAGE DOOR BRACKET REPLACEMENT - Garage door reinforcement kit - fits most brands genie, liftmaster, sears, craftsman. Same as 19792A04, 19782, 19792A, 19792A04.S, 19792B. Universal door bracket to connect door to door arm..
  • "GARAGE DOORS PARTS - Recommended to attach the bracket to the sectional door and install a piece of corner metal behind the style to which the garage door mounting bracket is attached to reinforce the style to which the opener will be attached. ".
  • GARAGE DOOR BRACE - This universal garage reinforcement bracket is easy to install, attaches to your garage door for use with any model of garage door opener. Check your garage door owner's manual for installation recommendations..
Check Stock

Hairpin Cotter Pin Assortment Kit Zinc Plated Steel Hitch Clip Pins Fastener Set Multiple Sizes 250PCS

  • VIGRUE Cotter Pin assortment kit are made of premium quality heavy duty steel ensures a very long life of use in any workshop, no need to replace these..
  • VARIETY Cotter Pins & R Clips- This cotter pin assortment contains 6 sizes of cotter pins and hairpin clips and 250pcs that meets all your needs for any mechanical, automotive, or small engine repair..
  • Widely Application- Cotter pin and hair pin can hold for bolts and pins, used to Automotive, Mechanics, Car Garage, Workshop, Power Equipment, Cars, Trucks, Lawn Mower, Small Engine Repair & Fastening..
  • CONVENIENT Storage Box- comes with a see-through portable storage case to keep all hitch pin clips clean and organized. The sizing labels on the flip side of the container make sure that you are as organized as possible..
  • 100% Worry-free Purchase- Customers enjoy 12 months replacement and full refund guarantee. If you need any help, welcome to contact our after-sale service, VIGRUE provides 7/24 online service..
Check Stock