Bolany Bike Seat Posts Bike Suspension Seatpost 27.2 31.6 Alumium Adjustable Seatpost for MTB Road Bike Mountain Bike Fixed Bike Seatpost (red, 27.2mm)
- Bike Suspension Seatpost Spring Coil Suspension & Reduce Bump Impact: Build-in spring coil and damper rubber absorb the vibration while riding, the seat post comfort your riding experience, improve the shocks and pain immediately. Rebound force adjustable by tighten or loose the bottom screw. ★Pay Attention to Choose Correct Diameter Size★ to avoid mistake and save your time. Different size is not compatible..
- Rebound Force Adjustable & Clamp Angle Adjustable: You can adjust the bottom screw to change the spring rebound force fit to your weight to get best riding experience. Saddle clamp angle can adjust in -5 degree to +18 degree. 2 bolts hold the clamp, enhance safe and easy to install..
- Multi Diameter & Colors: We offer 27.2mm, 31.6mm diameters. 3 different colors, black clamp – black body, red clamp -black body, silver head – silver body...
- How to Choose the Size:1.Check your current seatpost diameter, size marked on lower position of the post (Need to take it out from tube to see the size mark). And buy same size from the option. 2.Measure the inside diameter of the frame tube..
- Suit for most Fixed Gear bike ,Road Bike ,Mountain Bike , Universal Bikes,etc.It fit for riders weight 50kg/ 110lbs to 180kg/ 397lbs.
Check StockPOWERTEC 71438 T-Track Clamp Vice | Hold Down Clamps for T-Tracks Accepting 1/4 Inch hex head Bolts – 2 Pack
- INCLUDES: (2) Screw Vice Hold Down Clamps for T-Tracks.
- FUNCTION: Designed to fit any standard t-track that accepts 1/4” hex head bolts – these screw type clamps will slide into your t-track and quickly secure your workpiece with a twist of the knob.
- VERSATILITY: Works seamlessly with an assortment of applications, including router table, drill press, saws and jig assemblies.
- CLAMP CAPACITY: Able to securely hold 1/4” to 2” thick woodworking stock. Compatible with Kreg, Incra, Peachtree Mini and other ¼” T Track..
- PREMIUM BUILD: Each hold down clamp features an ergonomic design with a plated steel clamp screw and foot with a soft plastic non marring cap, paired with an anodized aluminum body and round 1-1/2” clamping screw knob.
Check StockPOWERTEC 71439 T-Track Clamp Vice | Hold Down Clamps for T-Tracks Accepting 5/16” or Larger hex head Bolts – 2 Pack
- INCLUDES: (2) Screw Vice Hold Down Clamps for T-Tracks.
- FUNCTION: Designed to fit any standard t-track that accepts 5/16”or Larger hex head bolts – these screw type clamps will slide into your t-track and quickly secure your workpiece with a twist of the knob.
- VERSATILITY: Works seamlessly with an assortment of applications, including router table, drill press, saws and jig assemblies.
- CLAMP CAPACITY: Able to securely hold 1/4” to 2” thick woodworking stock. Works with all universal and heavy duty..
- PREMIUM BUILD: Each hold down clamp features an ergonomic design with a plated steel clamp screw and foot with a soft plastic non marring cap, paired with an anodized aluminum body and round 1-1/2” clamping screw knob.
Check StockGub Bike SeatPost Seat Post Clamp Tube Clip Quick Release Aluminium Alloy MTB Seatpost Clamp Mountain Road Bike Parts 34.9mm 31.8mm (SBLACK31.8)
- Material: Aluminum Alloy. Diameter:31.8mm and 34.9mm.Diameter refer to seat post tube diameter not the seat post..
- Aluminum Quick Release Bike Seat Clamp.strong sleek retaining bolts.
- strong sleek retaining bolts ensure it to be double sturdy and firm..
Check Stock
T Track Hold Down Clamps Woodworking T Slot Clamp 20mm Dog Hole Clamp Quick Acting Aluminum Alloy
- Finally, a quick release clamping system for jigs, fixtures and fences. Spending a lot of time tightening and loosening knobs on your jigs and fixtures? Or maybe your are constantly rotating knobs on your router table or drill press fences..
- Our exclusive cam clamps will solve your problem and provide you with a quick release clamping system for all of your jigs, fixtures and some fences that rely on a track system. Having a cam clamp on your router table fence makes is so much easier to make quick adjustments and quickly lock the fence in place..
- The clamp body is made out of aluminum, measures approximately 1-1/2” long and each clamp has a standard 3” long hex head bolt that works with most standard sizes of t-track (depending on which size Cam Action Clamp you purchase). Be sure to get the correct size for your needs. Typically that means you should check to see what size slot or track you would like to use the clamps in..
- The Cam Action Clamps are available in ¼” 5/16” and 3/8” hex head bolt sizes. Another nice feature of the Cam Action Clamps is that you can swap the bolts out for different situations..
- For instance, if you have a slot requiring a T-bolt, you can switch out the ¼” hex head bolt with a ¼” T-bolt. Each cam can ex....
Check StockTnuocke 2.0" Butt Joint Band Exhaust Seal Clamp Sleeve,50mm Stainless Steel Exhaust Sleeve Band for Exhaust Pipe, Muffler,Manifolds,Coupler H-031-50
- Premiun Materials:The exhaust clamp is made from high quality stainless steel, stainless steel material, not easy to rust, corrosion-resistant,Precision-machined, shiny surface with no burr.
- Prefect design:Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion.
- Easy install:Put one of the nutbars on one side and insert the bolts, put another nut bar on, then screw the nuts, and connect.
- Wide use:They are fit perfectly for exhaust tips, mufflers, cat back systems, racing exhaust.
- Package:You will get 1 stainless steel Exhaust Band Clamp,The exhaust band clamp is reusable without damaging the pipes.
Check StockCoadura Cable Clamps 1 1/2 Inch - Rubber Cushioned Stainless Steel Cable Clamp 30pcs Wire Clamps Hose Clamps Loop Clamps Pipe Clamps
- Made of high-quality materials - The cable clamps are made of 304 stainless steel with high-quality rubber pads. The cable clamp is sturdy and....
- Size - Cable clamp screw hole diameter: 6.5mm, fit for 6M( 1/4 inch) screw bolt to through them. Cable clamp inside diameter 1 1/2 inch. Fit for 1 1/2....
- Easy to install - The R-shaped design is easy to install and disassemble. You only need M6 (6mm) bolts and nuts to easily complete your installation....
- Widely used - Clamps are marine grade. Perfect to apply in automotive, industrial, boat/marine, windshield, household etc. For wiring, cables, pipe,....
- Environmental friendly - It can be reused and recycle if you do not want them to stay on the original place thanks to the high quality material which....
Check StockCDM Gear ROC-12S Low Profile Light Mount with Built-In Sling Swivel Dock
- MATERIAL - Made from aluminum 1-piece clamp halves that have the rail formed into the clamp.
- PROFILE - Super low profile at about a 1/2" away from the barrel with a curved, 3 slot rail that reduces hang ups and snags.
- EASY TO MOUNT - It only uses 2 bolts that correlate the 2 halves to reduce incorrect mounting.
- INSTALLATION- It fits within a 1.25" space on your magazine tube and includes no slip grip pads and a wrench.
Check Stock
Bestop 9003435 Black Diamond Duster Deck Cover Extension for 2007-2018 Wrangler Unlimited
- Truck Camper Mounting Clamps Set of 4 - Designed to mount the truck camper shell to your truck. These mounts are universal and are made of aluminum steel that is corrosion free and strong at the same time. Purposely large clamps that are powder coated and fits a wide array of camper shell models for almost any truck..
- Drilling mounting holes into your truck or camper is a hard commitment to make as they are permanent and may look ugly in the long run when you decide you don't want them anymore, these clamps get rid of that commitment while still providing the same tight fit and security of mounting your camper shell by drilling..
- Strong Aluminum construction that is powder coated with black provides that stealthy and simple but elegant look which matches all types of surface beautifully. Strong and durable and does not deform easily. Unique 2 piece chuck design requires no special tools and can be installed and uninstalled in minutes. Installation is easy specially for beginners and first timers..
- Specifications - 1.43 inch clamp height, 1.12 inch clamp width. See images for complete measurements. Universal fit designed to fit most pick-up truck models with quick tightening bolts using a wrench or ratchet perfect for mounting fiberglass truck caps or al....
Check Stock 
