TABIGER Desoldering Wick & Desoldering Pump, 3 Pcs Solder Sucker & 2 Pcs Solder Wick(2.5mm Width, 1.5m Length), Solder Remover Kit for Desoldering
- 【ONE-HANDED USE DESIGN】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready..
- 【HIGH QUALITY AND POWERFUL SUNCTION】 The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively..
- 【ALLOY BRAIDED SOLDER WICK】 Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas..
- 【DURABLE DESOLDERING IRON TOOL】 The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time..
- 【A MUST-HAVE SOLDER REMOVAL KIT】 The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards..
Check StockJVC KS-DR1004D 400 Watt 4-Channel Bridgeable Amplifier for Car & Marine and RZR/ATV/UTV/Cart Motorsports
- VERSATILE: JVC’s marine and motor sports receivers and amplifiers feature compact size for versatile installation even in tight spaces.
- DURABLE: Built tough with Conformal coated main PCBs (printed circuit boards) offer additional protection against moisture and condensation from damaging the product.
- VARIABLE HPF & LPF: Compared with fixed type switching, more precise sound adjustment is possible to match your preferences.
- SMALL BUT POWERFUL - Compact 4-channel amplifier for car, motorcycle, and boat 45 watts RMS x 4 at 2 to 4 ohms. 90 watts RMS x 2 bridged at 4 ohms Class D amp technology that is CTA-2006 compliant.
- QUALITY SOUND - Separated circuit boards of the Pre-amp and Power-amp sections to reduce radiation noise, A Large Low Pass Filter coil provides stable, high quality sound with no distortion even when playing at high volume.
Check StockSquare D - QO250GFICP QO 50-Amp Two-Pole GFCI Breaker
- Compatible with QO load centers, CSED's and NQOD panel boards.
Check Stock
APT, 1 mil Thick Polyimide Adhesive Tape, HighTemperature and Heat Tape, for Masking, Soldering, Electrical, 3D Printer Application. (2\x 36 yds)
- 【Wide Area of Applications】-Used for electronic products, soldering, circuit boards, manufacturing, fiber optics cable, insulating circuit boards, ground barrier & insulation for coils, 3D printing, high temperature sublimation powder coating, etc..
- 【High Temperature】- APT Polyimide tape has highly excellent heat & solvent resistance. Minimal shrinkage after baking and clean removal, and also shows the great electrical insulation. It maintain high-temperature resistance as high as 400F (260℃)..
- 【Clean Removal, No Residue】- Our high temperature tape can withstand up to 400F (260℃) degrees. Remove cleanly, leaves no residue..
- 【No Shrinking, Curling, Or Lifter Edges】- Made with high temperature silicone adhesive and premium film. Our tape resists curling, shrinking, and lifted edges every time..
- 【Trusted Every Where】- Our tape do not contain any harmful chemicals, and complies with RoHs & Reach requirements. It is rigorously tested and meets American Society for Testing and Materials D-5213 standard, for high performance every time..
Check Stock
Soldering Iron Auxiliary Kit, Desoldering Pump, No-Clean Soldering Core (Width2.5mm / 0.1\
- The main body of the desoldering pump is made of high-quality ABS material, with a non-slip sponge. The nylon nozzle can withstand high temperature, anti-static, heat-resistant, durable, special design, convenient for one-handed use..
- High-quality desoldering braided tape is woven with fine copper wire, unique no-clean flux, easy to use, pure oxygen-free copper wire, 2.5mm / 0.1 inch width and 1.5m / 59 inch length, can help remove excess Avoid solder,Avoid short circuit， especially in hard-to-reach small areas..
- Micro Shear Wire Cutter Pliers are made of high quality steel, with strong cutting ability, For cutting flexible cords up to 1 mm, non-slip handles, return springs, small volume。.
- Solder wire diameter: 0.8mm, weight: about 0.35 ounces / 10 grams. Easy to carry and store, suitable for various soldering irons..
- Suitable for correcting errors on PCB boards, cleaning small components, resoldering and desoldering circuit boards, Appliance Repair, Family DIY lovers, welding, etc..
Check StockTenma 21-8240 Vacuum Desoldering Iron
- 30 Watt: Powerful enough to remove common soldering mistakes found on small devices. Heats up quickly..
- Easy Operation: Designed for right or left-hand operation. Quickly heats up and uses a strong vacuum pump to remove solder..
- Lays flat: When not in use or when in-between jobs, the desoldering pump lays lat with the hot tip elevated to prevent from unwanted burns.
- Used to correct mistakes with small boards on PCBs, re-solder mechanical keyboard switches, remove relays and other components from printed circuit boards, unsoldering old wires, desoldering computer parts like motherboards, clean alloy on smd components and more..
Check StockCircuit Board Holder - Adjustable 360°Degree Flipping with Magnifying Glass For Clamping PCB Soldering Desoldering and rework AB-22
- Flame Retardant Material: The soldering helper helping hands soldering station is made of aluminum alloy, the base is iron base and stainless steel,....
- Circuit Board Holder: The circuit board holder with 2 arms (L=12.2 inch) and a magnifying lamp, the lamp with 42pcs 5W LED light, 3 color modes....
- Solid Base: The base is solid and heavy with high quality paintwork, the riser arms are aluminum. It can clamp the big boards, L=11.81''..
- Easy to Install: The third hand circuit board holder is easy to install, quick to insert and remove. The third-hand soldering station comes with 2....
- What You Get - 1 x Iron Base, 1 x Circuit Board Holder, 1 x Magnifying Lamp, 2 x Arms. If you have any questions, you can contact us at any time, and....
Check Stock
Weller WES51 Compatible Heat-Set Insert Installation Tips for M2, M2.5, M3, M4, and M5 Inserts Used for Connecting 3D Printed Parts.…
- Designed and manufactured in the USA. The original long shank tip for the WES51/WESD51 iron. If you see others with these shapes not made by Virtjoule, they are copy cats. Longer shank than other tips allows you to reach deeper into 3D printed parts and tight corners to install heat-set inserts without touching your iron and melting the plastic..
- Installation tip works better than soldering iron tip since conical tips can catch on the insert and accidentally pull the insert out while melting the plastic and ruining the part..
- Tip sizes include M2, M2.5, M3, M4, and M5. M2.5 is a popular hole size for Raspberry Pi circuit boards. M3 is a popular size for Arduino circuit boards..
- Compact tip cradle included to keep them together when they're not being used..
- Wide size range gives you lots of flexibility to choose the right insert for your 3D printing project..
Check StockPurse Organzier Bag Organizer with Metal Zipper Large Beige
- ★32 pieces double sided PCB prototype boards well packed in a plastic tray which is very easy to store and take out.
- ★5 different size boards to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects.
- ★4 mounting holes at the corners of the board are very convenient for installing them together..
- ★Pre-tinned plated holes on the board make it very handy to solder components and sensors for your projects.
- ★High quality of durable glass fiber –FR4 material with 1.6mm thickness makes a very solid and sturdy prototype circuit board.
Check Stock 
