Reviews Chip Power Inductors

RioRand DMX512 LED Signal Splitter Amplifier Distributor 1 Way in 8-Channel 3-Pin Output with Signal Indicator

DMX512 signal amplification function and prolong the DMX signal transmission distance.
DMX512 signal distribution function, multi-level sharing after a DMX control system.
Separate inductors power cable, independent DMX signal ground, the standard DMX independent distribution amplifier.
Eight independent isolated output function, to avoid the system after the class DMX signal interference and sabotageOne input, eight independent DMX signal amplifier output.

Loki Mini+ transforms your system without getting in the way, or making itself known. Uses a single, discrete, current-feedback gain stage, coupled to....
Loki Mini+ helps you adjust for imperfections and/or tune your system to the way you want it to sound. Bands: 20Hz, 400Hz, 2kHz, 8kHz. Adjustment:....
Includes a USA power adapter intended for use ONLY in countries with 115VAC wall voltage such as the United States, Canada, and Mexico. Adapter will....
Loki Mini+ uses LC filtering for very low hiss, but the inductors may pick up hum from other electronics. If you run into hum problems, move Loki....

Loki Mini+ transforms your system without getting in the way, or making itself known. Uses a single, discrete, current-feedback gain stage, coupled to....
Loki Mini+ helps you adjust for imperfections and/or tune your system to the way you want it to sound. Bands: 20Hz, 400Hz, 2kHz, 8kHz. Adjustment:....
Includes a USA power adapter intended for use ONLY in countries with 115VAC wall voltage such as the United States, Canada, and Mexico. Adapter will....
Loki Mini+ uses LC filtering for very low hiss, but the inductors may pick up hum from other electronics. If you run into hum problems, move Loki....

【Small Vertical Inductive】 Small Vertical Inductors Occupy Less Space..
【Performance Stability】 The Inductor Coil Is Protected with PVC or UL Tube To Ensure Stable Performance..
【Feature】 this Choke Inductor Has Special Guide Pin Structure.
Not easy to produce open circuit phenomenon..
【Specification】 1uh to 220uh 1MH to 20MH.
The Choke Coil Inductors Arefi SMALL Distributed Capacits And High Self-Resonance Frequency..
【Include】 10UH, 100UH, 220UH, 1UH, 4.7UH, 15UH, 33UH, 150UH, 1MH, 2.7MH, 10MH, 20MH, 10UH, 1MH, 10MH.

High frequency transducer: XStat CLS electrostatic transducer.
Low frequency driver : 8" high excursion, high-rigidity doped fiber cone with extended throw drive assembly, non-resonance asymmetrical chamber format.
MicroPerf panel is housed within a radical aluminum and composite AirFrame.
129 square inches of sound radiating surface on both the front and back.
Proprietary Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
Frequency response: 42 - 22,000 Hz ±3 dB, Sensitivity: 91 dB/2.83 volts/meter.
Recommended amplifier power: 20-300 watts per channel.
Dimensions: 52.1" high, 9" wide, 16.3" deep.

Equipped with a Diode 6A60 for reverse polarity protection along with a 4-way protection circuitry.
sleep easy at night knowing your 4ch car audio amplifier is protected.
Built using an advanced PCB board featuring industry-leading capacitors, high quality transformers and cutting-edge inductors to ensure this 4ch car amplifier delivers the power you need to destroy the competition in the SPL lanes.
LED logo, plexiglass bottom, and reinforced tiffany style RCAs gives this car stereo amplifier a prestigious look that is guaranteed to turn heads.
Heavy duty heat sink design, high power MOSFET switching technology, and best in class internal components will ensure the amplifier for car speakers runs cool for even the most demanding playlists.
4 channel amplifier car audio rated 75W @ 4-ohm x 4-ch (14.4v).

L-C-R soundbar, Slim design, Binding Posts: Push style.
High Frequency Driver: Three 1" x 1.4" Folded Motion Transducers with 5.25" x 1.75" diaphragm.
Low Frequency Drivers: Six 4" paper cone, sealed cabinet.
Components: Custom air core coil inductors, polyester film capacitors in series and low DF electrolytic capacitors in parallel, overall system thermal/current protection.
Frequency Response: 120–23,000 Hz ± 3 dB.
Dispersion: 80° x 80°, Sensitivity: 93 dB @ 2.83 volts/ meter.
Impedance: 4 Ohms. Compatible with 4, 6 or 8 Ohm rated amplifiers..
Crossover Frequency: 3,000 Hz (2-way design), Recommended Amplifier Power: 20–140 watts.
Dimensions with wall bracket (HxWxD): 6.3" x 48" x 2".

4 channel amplifier car audio rated 125W @ 4-ohm x 4-ch (14.4v).
Built using an advanced PCB board featuring industry-leading capacitors, high quality transformers and cutting-edge inductors to ensure this 4-channel car amplifier delivers the power you need to destroy the competition in the SPL lanes.
LED logo, plexiglass bottom, and reinforced tiffany style RCAs gives this car stereo amplifier a prestigious look that is guaranteed to turn heads.
Heavy duty heat sink design, high power MOSFET switching technology, and best in class internal components will ensure the car amplifier runs cool for even the most demanding playlists.
Equipped with a Diode 6A60 for reverse polarity protection along with a 4-way protection circuitry.
sleep easy at night knowing your 4ch car audio amplifier is protected.

... JRX225 Dual 15" 2000 Watt Passive DJ/PA Speaker. Dual JBI low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil for greater efficiency and power handling. JBI 2414H-C 25 mm (1 in) polymer diaphragm compression driver.
Advanced network topology crossover design. High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure.
SonicGuard protects the high frequency driver from excess power without interrupting the performance. Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Details: Power Rating : 500 W / 2000 W.
Frequency Range (-10 dB) : 42 Hz - 18 kHz. Frequency Response (3 dB) : 62 Hz - 13 kHz. Sensitivity (1w/1m) : 100 dB SPL. Nominal Impedance : 4 ohms. Recommended Amplifier Power : 500 W to 1000 W into 4 ohms. Maximum SPL : 133 dB. Nominal Dispersion : 90 x 50. Crossover Frequency : 2.2 kHz.
Dimensions (H x W x D) : 1092 mm x 464 mm x 432 mm (43 in x 18.3 in x 17 in). Weight : 42.6 kg (94 lb). High Frequency Driver : JBI 2414H-C , 1" exit compression driver mounted on Progressive Transition Waveguide. Low Frequency Dr....