Chicago Pneumatic CP835 Heavy Duty Air Nibbler - Pneumatic Nibbler with Four Different Cutting Positions. Shears and Nibblers
- Heavy-Duty Nibbler Tool: air nibbler is ergonomically designed for precise cutting of steel and aluminum metal. Pneumatic nibbler is a perfect tool for accurate cutting with superior performance in tight corners and circles.
- Professional Metal Nibbler: this air operated nibbler is easy to operate and control. The handheld tool can be used for nibbling plastic, tin, aluminum, and other metals.
- Easy-to-use: air powered tool provides easily access to punch and die for quick replacement. Rear exhaust of this pneumatic nibbler directs the air away from work area.
- Portable Nibbler: lightweight hand tool features a Lock-off lever for low-speed starting, providing enhanced user control. Pneumatic tool allows the user to place die in four different cutting positions.
- Specifications: powerful air nibbler delivers 2750 strokes per minute. Rugged nibbling head and.177 in. diameter punch of the pneumatic nibbler cuts steel up to .060 in. (16 gauge) and aluminum up to .102 in. (10 gauge).
Check StockIWISS SN-PM Wire Crimping Tool & Wire Stripper Set 8 Pieces Quick Changing Die Sets for Heat Shrink Terminals Open Barrel Terminals MC4 terminals Insulated & Non-insulated Connectors
- Purpose: SN-PM is an all-in-one wire terminal crimping tool set which includes an SN series compact crimper, 5 quick changing die sets, one wire....
- 5 Pieces Die Sets: SN-PM wire crimper tool kit includes 5 quick changing die sets work with heat shrink, insulated nylon/vinyl terminals, open....
- Wire Stripper: Ideal for copper and aluminum cables from 10-22 AWG. Multifunctional stripper & cutter. Built in shear cutter cuts solid or stranded....
- Applications: Wire crimping tool set(8 pieces) ideal for electrical wiring projects in DIY, electronics, RV refit, RC race car, automotive audio,....
- Compact Storage: Crimping tools are steel construction with comfortable cushioned grip handles. Supplied in a durable, plastic molded storage case..
Check StockYON.SOU. Air Die Grinder - 1/4\
- ... grinder could prevent accidental engagement, you wouldn't get hurt even if you just start to learn to use the air die grinder. The air inlet filter could keep the die grinder from contamination. Built-in regulator makes it easy to control air die grinder's speed..
- ⚙️ VARIOUS APPLICATIONS: This angle die grinder tool is air-powered, you should connect the air grinder to an air compressor before use. With variable speed and changable bits or pads, the die grinder is suitable for various applications, such as machining, smoothing, chamfering, deburring, grinding, polishing, engraving for metal, woodwork, tire, plastic, etc..
Check Stock
SOLEILLUNE Battery Cable Lug Crimping Tool for AWG 10, 8, 6, 4, 2, 1 Terminals with 60Pcs 8Specs Copper Ring Cable Lugs Kit Heavy Duty Wire Terminal Crimper for Electrical Connectors
- 【LIGHTWEIGHT MATERIAL】The handle of the Wire Crimper tool is made of high-quality 6061-T6 aluminum alloy, with a lighter weight of only 2.35 pounds, which makes the crimping tool more convenient to carry and use. The head of the wire crimping tool is made of high-quality carbon steel with longer service life. The long handle of the battery terminal crimper wrapped with non-slip soft vinyl help you use less effort when crimping..
- 【ROTATE CRIMP DIES】The professional cable terminal crimping tools are available in 6 crimping sizes, 10, 8, 6, 4, 2, 1 AWG (Corresponding to 6mm²/10mm²/16mm²/25mm²/35mm²/50mm²), and use a hexagonal rotating crimp die which is retained in place with a spring loaded locking pin. Thanks to processed by Wire EDM Cutting, the crimp die is more accurate than the ordinary casting die or stamped die..
- 【EASY OPERATION】Open the handle of the crimper, then press the Lockpin and rotate the crimp jaw to the size you need, place the cable and lug, then pull strongly on the ratcheting wire terminal crimper to make a great crimp on the cable lugs. Finally, rotate the connector 90 degrees to another direction and repeat the previous step for secondary crimping. Crimping twice is more secure..
Check Stock
ABN Power Punch Heavy Duty Hole Punch Set – Metal Hole Punch, Heavy Duty Hole Puncher Hand Punch 3/32in to 9/32in
- PUNCH HOLES IN YOUR PROJECT: The ABN Hole Punch Tool is a heavy duty punch and dies kit that has a high-leverage design and comfortable grips that allow you to manually create clean holes through sheet metals up to US 16 gauge.
- For mild sheet steel, aluminum, brass, polyurethane, plastic, canvas, cardboard, paper, shoe.
- Additionally use as a leather punch, belt hole puncher, metal hole punch for jewelry, and watch hole puncher.
- Not recommended for stainless steel such as silverware and utensils.
- PERFECT SIZE: Creates holes that are from 3/32-inch to 9/32-inch in diameter and includes a stop gauge for consistent spacing.
- 7 sizes of punches and dies include 3/32-inch (2mm), 1/8-inch (3mm), 5/32-inch (4mm), 3/16-inch (4.5mm), 7/32-inch (5.5mm), 1/4-inch (6mm), 9/32-inch (7mm).
- 1.75-inch (4.4cm) throat depth to punch holes as close as 1.75 inches away from material edge.
- EASY TO USE: This sheet metal punch uses interchangeable heads to pierce holes in a material of your choosing.
- Select a proper size punch and die, remove nut near handle using die adjustment tool, move connection bar, place punch on the head of hand punch, rotate nut by again using the adjustment tool to adjust caliper, and set distance between the edge and the hole.
Check Stock
Tshya 270Pack 2inch Sanding Discs Pad Variety Kit for Drill Grinder Rotary Tools Die Grinder Accessories with 1/8'&1/4' Shank Backer Plate, Sanding Pads Includes 36-3000 Grit
- ... sangding Discs(26Pcs) and Aluminum oxide hook loop discs (240Pcs),sanding with common grits (P36-3000) to meet your various polishing requirements..
- ✔ TWO TYPES SHANKS - We have found all the connection methods for your project as far as possible. Roll Lock 1/4 inch(6.35mm) Round shank works better with pneumatic tools.
- 1/4 inch Hex shank more suitable for electric tools..
- ✔ THREE WAYS CONNECT - The Air-Tool Backer Plate with 1/8"&1/4" Shank can work with any air or electric drill, die grinder, and other rotary tools for the utmost sanding control. You can even put the pad directly on a pneumatic tool without shank..
- ✔ PERFECT FOR DIE GRINDER - A special soft PU Foam adapter Pad has been developed for this Kit, you can easily install the Hook Loop sandpaper on the Black Disc Pad Holder, so that your can do more with die grinder,Time is Money！.
- ✔ 270 PACK – 240Pcs 2 inch H&L Sanding Discs (P80/120/180/240/320/400/600/800/1000/1500/2000/3000 each 20Pcs), 15 Pcs Zirconia roll lock discs (P36/60/80 each 5Pcs), 9 Pcs Non-woven discs, 1Pcs Strip disc, 1Pcs Wool disc, 1Pcs Air-Tool Backer Plate with 1/8"&1/4" Shank, 1Pcs Disc Pad with 1/4"Round/Hex Shanks, 1Pcs Soft Foam Layer Buffering Pad, 1Pcs PU Foam adapter Pad..
Check Stock
FLKQC 13 Piece Watch Press Set | Watch Back Press Watch Back Case Closer Include 12 Dies with Metal Inserts
- Easy & quick to fix watch: only several steps - choose two suitable dies, screw them on the press tool, and then press down the handle.Steps to use: 1.Find a die that is larger than the glass surface. 2.Find a die smaller than the glass surface. 3.The big die is below, the small die is on the top. 4.Install the two dies you choose on the watch press. 5.Adjust your watch to a good position,, then place the cover up on the watch press. 6.Gently press the handle to close the watch back cover..
- Comes with 12 dies allowing for 50/48mm, 46/44mm, 42/40mm, 38/36mm, 34/33mm, 32/31mm, 30/28mm, 26/24mm, 23/21mm, 20/18mm..
- Reminders:1) Before using this tool to close the watch back cover, you must choose the most suitable dies.2）It is better to pad a cleaning cloth under the watch for protection while closing the watch back cover.3）Place the watch on the bottom die and make sure it is in the correct position before closing the watch back cover. 4）Please read the instructions or use tutorial in the product's page carefully before use..
- High quality compression spring, longer service life,Ideal watch press for closing snap back type watch-cases.
- ABS plastic dies with a metal screw in the middle make it more durable, and won't scratch your watch.Bonus cleaning cl....
Check Stock
Indiana Metal Craft US Navy Crest Stainless Steel Construction Switchblade Golf Divot Repair Tool with 0.75 inches Die Struck Magnetic Nickel Silver Enamel Ball Marker
- SWITCHBLADE REPAIR TOOL WITH ENAMEL BALL MARKER: Navy CREST stainless steel construction switchblade divot repair tool with die struck magnetic nickel silver enamel ball marker. Divot tool has strong magnet to securely hold removable ball marker..
- SIZE: The size of the stainless steel construction switchblade repair tool is 1.25 inches X 2.75 inches and also holds removable 0.75" die struck nickel-silver ball marker with enamel..
- SUPERIOR DESIGN: This stainless steel divot repair tool is contemporary and modern design, solid, and durable (3 oz.)..
- MADE: Tool is imported. Ball marker is 100% American proudly made in USA by Indiana Metal Craft..
- OFFICIAL LICENSED PRODUCT: Official Licensed Product of the US Navy. By federal law, licensing fees paid to the US Navy for use of its trademark provides support to the Navy Trademark Licensing Program, and net licensing revenue is devoted to US Navy Morale, Welfare, and Recreation Programs..
Check StockFein Metal Sheet Nibbler - 350 Watts Power Consumption, 210 Watts Power Output, 1800 RPM Strokes - 72324260120
- Professional Grade - It has a rotating punch for up to 30% longer service life, has motor with outstanding performance and durability. It has low operating costs due to long tool life of punch and die..
- Lightweight - It has optimum ergonomics, including a motor housing that is up to 20% slimmer due to an extremely narrow drive head..
- Safety Ergonomic - It has chip protection mesh on vent slots. This tool has QuickIn rapid change system that allows for rapid, tool-free changing of the punch and die..
- Multipurpose - It has cutting direction setting can be changed in 45.
- Specifications - Power Consumption: 350 W, Strokes: 1,000-1,800 SPM, Cutting Speed: 7.5 ft./min., Cutting Width: 3/16.
Check Stock 
