Reviews Chemical Injection Pump

MTM Hydro PF22.2 Foam Cannon Kit, Pressure Washer Car Wash Sprayer Gun, High Pressure Foam Power Washer Attachment with Gray Hose and Extension Wand for Boat, Roof, Car Washing Detailing

  • HYDRO KIT - PF22.2 Foam Cannon, SGS28 Spray Gun with swivel, Hose, stainless steel fittings, Extension Wand, and adapters for car washing. Achieve an intensive clean with a chemical foam car wash..
  • ATTACHES TO PRESSURE WASHER  - The car wash foam sprayer attaches to your pressure washer with one of the included fittings. Includes multiple adapter options to fit a variety of pressure washers..
  • CAR WASHING - Car wash gun sprayer ideal for contract or home vehicle cleaning. Use the soap attachment for pressure washer to clean your vehicle, pole barn siding, house, fence, sidewalk, and roof..
  • LONG REACH - Foam washer gun fits in tight spaces and eliminates reaching. 3 Options to connect to the pump outlet and cross multiple lines of pressure washers from commercial grade to residential washers..
  • ADJUSTABLE – Foam cannon car wash with a chemical injection knob to increase or decrease foam output. Create thicker, denser foam to remove dirt and grime with this power washer foam cannon..
Check Stock

OTC 6080 Fuel Injection Test Kit for Master Cummins Diesel Engine

  • Includes the fittings and gauge needed to check fuel pressure fuel volume and fuel restrictions from the delivery pump to the injection pump.
  • Kit includes special quick-disconnect banjo fitting two fuel injection quick-coupler adapters quick-disconnect banjo fitting gauge assembly and fuel volume test adapter.
  • Also includes a diesel fuel inlet restriction test adapter for 1988-98 Dodge pickups and vans with 5.9L 12-valve and 1998-1/2-newer 5.9L 24-valve Cummins diesel engines.
Check Stock

Fuel Pressure Gauge Kit，0-140 PSI Fuel Pump Tester，Fuel Injection Pressure Tester Updated TU-114 Fuel Pressure Tester Kit Gas Oil Pressure Tools Gasoline Tester Tool

  • ...and corrosion.Durable plastic blow-molded case to protect components and provide easy transport and organization，Items are protected well in a sturdy case..
  • 【REGULAR CHECK FUEL INJECTOR PUMP PRESSURE】 High or low fuel pressure can cause many engine problems.It is mainly used to test whether the fuel supply and injection system are working normally, and to determine whether the internal components are damaged or the oil circuit is faulty. You can troubleshoot possible problems based on the vehicle manufacturer's user manual..
  • 【AFTER-SALES SERVICE】Package Included: 1x Fuel Injection Pressure Tester, As Picture Shows.Enclosed with an instruction manual.Note: Not for diesel high pressure injection pump or direct-injection engine.Buy with confidence, We provide 6 months warranty service, if you have any questions, please feel free to contact us via email.We will solve it for you as soon as possible..
Check Stock

CarBole External In Line Fuel Pump: 116 PSI High Pressure Unversal 12V Electric Pump Injection Systems Replacement for 0580464070 With Mounting Bracket Clamp (Red)

  • 100% brand new and high quality. Universal external in line fuel pump. Does not need to be mounted inside the tank.
  • Operation Pressure: 5-8bar (72.5-116 psi).
  • Flow Rate-120LPH at 6.0bar (about 31.7GPH at 87PSI).
  • Flow Rate-100LPH at 7.0bar (26.4GPH at 101.5psi).
  • Replaces 0580464070 and others but not OEM. Great for use with Mega Squirt and other aftermarket systems.
  • This pump is used for turbo/non turbo gas fuel injection systems up to 250bhp.
  • this is a universal fit pump and depending on your application some adapting will be required, installation may require skill and knowledge, no instructions are included.
  • Adopted Fuel Injection Molding Technology to upgrade the plastic parts of the product, which makes the fuel pump more durable, corrosion resistance and improve the service life of the pump.
  • Package including: 1pc high flow external fuel pump, 1pc Mounting Clamp, 2pcs rubber connection covers, 2pcs insulated terminals, 2pcs nuts, 2pcs gasket, 1pc bolt for bracket.
  • NOTE: It can only be used for gasoline and diesel, and CAN NOT be used for fuel containing methanol or ethanol, nor is it suitable for pumping water or oil..
Check Stock

Tool Daily Adjustable Soap Chemical Injector for Pressure Washer, 3/8 Inch Quick Connect

  • ATTENTION: Working pressure is 1000 to 2800 PSI. Flow rate is from 2 GPM to 5 GPM. 2800 PSI or higher will not work. Power washer chemical injector kit includes chemical injector, 10 Feet tubing, filter and black soap nozzle..
  • Application: Must Follow Manual to Set Up Chemical Injector. It is used to siphon detergent out of separate container. The chemical runs after pump. So it allows for a wider choice of chemicals..
  • Chemical injector has standard 3/8’’ quick connect fitting. It connects pressure washer pump to hose..
  • Dilution ratio of chemical vs water can been adjusted by controlling metering valve..
  • Works with most brands of gas and electric pressure washer. Suitable for cold and hot water pressure washer..
Check Stock

Michigan Motorsports Rack Cap Fitment for 1994 thru 1998 Dodge Cummins, Fits all P7100 injection pumps 2500 3500

  • Rack Cap for 1994-1998.5 Dodge Cummins Diesel & Bosch P7100 Pump,.
  • The Billet Rack Cap allows full rack travel of the P7100 injection pump. This Rack Cap is drilled deeper than the stock rack cap to provide more rack travel. By allowing 4mm more travel, the horsepower gain will be impressive!.
  • Fits ‘94-‘98.5 Dodge Cummins and all P7100 injection pumps.
  • Replaces: Bosch part 2095 and Bosch part #2423462000.
  • Made of the highest quality materials available..
Check Stock

JIFETOR Universal Auto Gasoline Gas Fuel Injection Pressure Tester Gauge Tool Set Only for Bosch CIS System Car Truck SUV Motorcycle ATV RV SUV Blue Case

  • BOSCH CIS DEDICATED SYSTEM: Fuel pressure test gauge kit includes 1PC fuel pressure gauge tester with rubber hose and drain hose, 1PC hose assembly for Bosch CIS (Continuous Injection System), and 9PCS metal adapters. More professional, more efficient. Specifically recommended for use with import and domestic gasoline vehicles including cars, SUVs, and trucks using Bosch CIS systems. If you need a full system of fuel injection pump set please serach for B085TM8577 in our store..
  • FUEL INJECTION GAUGE TESTER: Fuel pump pressure tester is an essential part of the troubleshooting process of automotive fuel injection systems. Gauge is made to detect bad fuel pumps, bad pressure regulators, leaking injectors and clogged fuel filters. Fuel injection tester features 4" big dial, built-in hoses with pressure relief valve, and quick coupler system. Low pressure range (0-140 psi/0-10 bar) makes it limited to gasoline engines for fuel pressure test..
  • HOSE WITH METAL ADAPTERS: Fuel pressure gauge set contains 1PC built-in 43" long rubber hose with 44" clear drain hose, and 1PC 27.5" Bosch CIS- specific hose valve assembly for test connection. Rubber hoses endure torsion, temperature and pressure extremes to ensure safe use. Brass for corrosion resistance, and ducti....
Check Stock

ATP 0-140 PSI Fuel Injection Pump Injector Tester Test Pressure Gauge Gasoline Cars

  • UNIVERSAL DESIGN:The included adapters, hoses and fittings cover all fuel injection systems and most cars and trucks world wide!.
  • IDEAL FOR MECHANICS:Fuel Injection Pump Pressure / Oil Combustion Spraying Pressure Gauge Teste.
  • DURABLE: Designed for repeated use with high quality materials.
  • A MONEY-SAVING TOOL: Save hundreds of dollars on fuel injection tester kit..
Check Stock

Lichamp Fuel Pressure Gauge, Fuel Pump Pressure Test Kit with Pressure Tester Adapter and Hose, B1BK

  • FUEL PRESSURE TESTER - Automotive fuel injector tester kit tests fuel supply & injection system problems, help to judge if there are broken internal components or faulty oil lines..
  • WIDE COMPATIBILITY - Suitable for most gasoline engines on car, truck, SUV, motorcycle, ATV, RV. NOT FOR diesel high pressure injection pump or direct-injection engine, INCOMPATIBLE WITH EFI, CIS or TBI System, INCOMPATIBLE WITH Ford 1/4" Small Schrader Fitting.
  • UP TO 140PSI / 10BAR - Provide with dual scale accurate readings 0-140psi (0-10 bar), easy to read and provide you more precise and accurate readings.
  • ALL IN ONE SET - Equipped with various adapters and hoses to connect for testing, great for 1/4" standard Schrader valve and M6/M8/M10/M12/M14 service port. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles..
  • LONG LASTING MATERIALS - Designed for repeated use with high quality materials (Brass, Steel, Rubber, Plastic), rugged and long-lasting. Excellent air-tightness and avoid any leaking.
Check Stock